Rockville SPGN124 12" Passive 1200W DJ PA Speaker ABS Lightweight Cabinet 4 Ohm

Description
Warranty Information

Package Includes:

(2) Rockville SPGN124 12" Passive 1200W DJ PA Speakers ABS Lightweight Cabinet 4 Ohm
(1) Pair of Rockville Tripod DJ PA Speaker Stands + Carrying Case Black RVSS2
(1) Rockville RPA5 1000 Watt Peak / 500w RMS 2 Channel Power Amplifier Pro/DJ Amp
(1) Rockville PPA20 Preamp Professional 1U Rack Mount Pre-Amplifier w/Crossover+EQ
(1) Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output!
(1) Rockville RBG12S Bass Gig 12" 1400 Watt Active Powered PA Subwoofer DJ/Pro
(2) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cables Black 100% Copper
(2) Rockville RCTR125B 25' 1/4'' TRS to 1/4'' TRS Cables, Black, 100% Copper
(2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cables 100% Copper
(1) Rockville RNRMR10 10' 3.5mm 1/8" TRS to Dual RCA Cable 100% Copper

How To Set Up Your SPG Passive Speaker (Series):

Description:

Colossal Pro Audio Power in a Lightweight Enclosure!

Rockville SPG124 (4-ohm)
Need mammoth, accurate output from your pro audio loudspeaker? Are you looking for a speaker that's going to last? A cabinet that's durable and designed to take the abuse of every day use? Well than we have what you are looking for! The Rockville SoundGig SPG series PA speaker is a passive loudspeaker with lots of style and can handle lots of power.

Rockville SPG SoundGig Passive Loudspeakers at a Glance:

Lightweight speakers with heavy-duty components
Precision-designed crossovers for maximum clarity
Rugged construction with multiple mounting options

Passive design with RPG components
The Rockville SPG SoundGig series passive loudspeakers are a quick way to expand your system, allowing you to add speakers and more power as needed. The SPG speakers offer the same drivers and studio sound quality of the popular Rockville RPG units. They're designed for optimum performance for use with powered mixers and power amplifiers.

Lightweight speakers with heavy-duty components.
The SPGN12 two-way loudspeakers weigh less than 25 pounds and pack a ton of punch. The SPGN12 features 1200-watt peak power capacity. They are designed with a 1.35-inch pure titanium high-frequency compression driver, and a 12“ low frequency transducer with a 2.5” high temperature aluminum voice coil to handle extreme power.

Precision-designed drivers, crossovers and cabinet for maximum clarity.
The crossover in the SPGN12 utilizes a Rockville's unique constant impedance circuit design. With equalization based on unique driver parameters and cabinet design properties the SPG speakers sound dispersion patterns match both the compression horn and woofers. This provides crystal clear natural sound at all volume levels including peak sound levels. You will experience exacting reproduction of bass, critical midrange and high frequencies for superb clarity.

Rugged construction with multiple mounting options
The SPG speakers feature an injection-molded ABS composite chassis that's extremely rigid to prevent unwanted resonance and standing waves forming inside the cabinet. The hard shell cabinet absorbs impacts that would turn lesser wood boxes into sawdust. For added convenience, SPG series speakers feature a pole mount socket in the bottom for stand mounting and the asymmetrical trapezoidal cabinet allows the speaker to be used on its side for stage monitor use.

Features:

Rockville SPGN124 12“ Passive 1200 Watt 4 Ohm Lightweight DJ PA ABS Cabinet Speaker
Power Handling: 300 Watts RMS / 600 Watts Program Power / 1200 Watts Peak
High power long-throw 12'' woofer with 2.5“ aluminum voice coil provides incredibly deep bass and acoustic power
High-power 2-way pro sound reinforcement speaker system for live sound and play back applications
Compact and light weight system delivers distortion free sound even at extreme SPL
State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction
Twist-Lock speakon input and output connections
Stage floor or stand mounting with 35-mm pole socket
Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into the cabinet
Versatile trapezoidal enclosure design allows different positioning
Tilts on its side for use as a floor monitor
Ergonomically shaped handle for easy carrying and setup
High-quality components and exceptionally rugged high impact ABS construction
Impedance: 4 Ohms
Frequency Response: 40Hz-20KHz
Maximum SPL @1w/1m: 125dB peak / 122dB continuous
Dimensions in inches: 22.75” x 13.6” x 11.2”

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville monitors are backed with a full one year warranty, though it is unlikely that you will need to use it.

All About Your RVSS2:

How to Set Up Your PA Speaker Stands:

Description:

This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment.

Includes:

(2) Tripod Speaker Stands

Features:

Adjustable Height
Steel Construction
Black Color
Weight Capacity: 132 lbs
Adjustable Height Range: 47-79 inches
Base spread: 0-23 inches
Tube Diameter: 1.38 inches
Leg Diameter: 1.38 inches

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.

Great features and great quality make Rockville a great choice.

How to Set Up Your RPA5 & RPA9:

Video of RPA5:

Heavy-Duty Powerhouse Pro Amplifier
The Rockville RPA5 1000-watt power amplifier combines efficiency with great sound to deliver a lightweight amplifier that packs a ton of punch. This amplifier is engineered using advanced design and components creating a lightweight design and extremely reliable operation that can pound daily for years and years of use. The computerized IC controlled protection circuitry allows delivery of peak power while preventing overloads. The RPA5 is optimized for 4 and 8-ohm speakers, and is equipped with a stereo/mono speaker output switch allowing for quick system impedance optimization. The RPA9 amp fits perfectly into standard 19” racks, and is lightweight enough (less than 30 lbs.) to make it incredibly easy to transport.

Top features!
We added a built in crossover so that you can use the amplifier for subwoofers or full range speakers. When connecting subwoofers simply select the low pass. We also added a link output which will allow you to use (2) of these amplifiers together at the same time for venues that demand even more power.

The other enhancement we made is that we added all the input and output terminals that ensure this amplifier is compatible with any setup!

We added XLR and ¼” combo jacks and RCA inputs making this amp perfect for any mixer and any speakers on the market. For outputs, we have banana and speakon outputs plus XLR direct outputs.

Mono Subwoofer-ready
A stereo/mono switch on the rear of the system allows for quick configuration to use multiple speakers in stereo mode or a single subwoofer in mono mode.

Power Ratings:

RMS Power Output:
Stereo 8 Ohm: 2 x 125W
Stereo 4 Ohm: 2 x 250W
Bridged 4 Ohm: 1 x 500W
Peak Power Output:
Stereo 8 Ohm: 2 x 250W Max
Stereo 4 Ohm: 2 x 400W Max
Bridged 4 Ohm: 1 x 1000W Max

Terminals:

Input Terminals:
Combo jack (XLR and ¼”) A & B inputs
RCA A & B Inputs
Output Terminals:
Banana binding post speaker output
Speakon output
XLR direct output

Features:

Rockville RPA5 1000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
2U rack space
Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers
Channel A & B Clipping Led Indicators
Channel A & B Separate Level Controls
Power, signal, overload, clipping, and protection LED indicators on front of amp
Heavy duty rack mount ears with handles
Built-in dual high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm Speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
User serviceable fuse (4A, 250V)
Frequency Response: 20Hz to 20KHz <+/- 0.5dB
Distortion: <0.03%
Input Impedance: 20K Ohm Balanced and 10K Ohm Unbalanced
Signal to Noise Ratio: > 102dB
Power Requirements: 120V / 50-60Hz
Weight: 13.4 lbs
Dimensions: 18.97 x 11.02 x 3.54 inch

How to Set Up Your PPA20 :

Features:

Rockville PPA20 Rack Mount Pre-Amplifier
1U Rack Size
1/4" microphone input
RCA PHONO / AUX1 / AUX2 / AUX3 / AUX4 / AUX5 inputs
1/4" headphone output
RCA REC / LINE outputs
XLR master output ( left, right )
Headphone volume & Microphone volume controls
3 band EQ (Treble / Mid / Bass)
Master volume
L / R balance
Input source switch
Mono / Stereo switch
Mute/Pad
Low Cut Switch allows you to cut off certain frequencies which comes in handy when using turntables, subs, and other gear. This function will allow you to play your music louder, with lower distortion and make your speakers last longer
Treble / Bass control
Loudness compensation circuit which at low-to-medium volume boosts the bass and treble response
Tape Monitor
Ground lift switch
Unit dimensions: 18.89” x 6.49” x 1.73” inches
Unit weight: 4.43 lbs
Shipping dimensions: 20.47” x 8.46” x 4.33” inches
Shipping weight: 5.73 lbs

Specifications:

Inputs Sensitivity/Impedance
Mic: 1mV / 3 Kohms
Phono: 3mV / 47 Kohms
Tape, Tuner, CD, Aux: 150mV / 22 Kohms
Output/Impedance
Tape Rec: 150mV / 3 Kohms
Pre Output: max. 11V / 1 Kohms
Total Harmonic Distortation
Mic: less than 0.02%
Phono: less than 0.04%
Tape, Tuner, CD, Aux: less than 0.01%
Signal To Noise Ration
Mic: more than 70 dB
Phono: more than 90 dB
Tape, Tuner, CD, Aux: more than 100 dB

General:

Frequency Response: 5Hz . 30kHz +0, -3 dB
Bass: 12dB at 100Hz
Midrange: 9dB at 1 Hz
Treble: 12dB at 10kHz
Loudness: +9dB at 100 Hz, +9db at 10kHz
Mute: -20dB
Power Consumption: 15W

How to Set up Your RBG12S:

All About Your RBG12S:

Features:

Rockville RBG12S 12" 1400 Watts Bass Gig 1200 Active Powered PA Subwoofer
350 Watts RMS / 700 Watts Program / 1400 Watts Peak
12" Woofer with 80oz Magnet and 2" Voice Coil
Frequency Response: 50HZ-2000HZ
Adjustable Crossover Control: 55HZ-800HZ
Maximum SPL @ 1w / 1m: 115dB Peak / 110dB Continuous
Power-On and Signal Input LED Indicators
Clip Limiter Circuitry with LED Indicator
Built-in Limiter Circuit automatically detects signal is being overdriven so that it does not clip and distort.
Balanced XLR + TRS input jacks
Balanced XLR thru/output jacks for parallel connections
Subwoofer Level Adjustment(Volume)
Subwoofer Polarity Control
Built-in pole mount socket
Built-in carrying handles
Custom metal grill
Durable black carpet with black metal corners
7-layer Birch 5/8" baffle board construction
Dimensions: 15.75" x 15.75" x 18.5"
Weight: 44Lbs
RCA input

Video of RCSS SPEAKON CABLES:

Video of RCSS1425:

Description:

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
100% Copper Conductors for Lower Resistance
Black PVC Jacket for Both Durability and Flexibility
Intended for High-Current Applications Only, Not Line-Level Signals
Length: 25 Ft
Gauge: 14

Authorized Rockville Dealer

Video of RCTR125B:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

Rockville RCTR125 Nickel Plated, 1/4'' TRS to 1/4'' TRS Balanced Cable
100% Copper Conductors for Enhanced Signal Clarity
OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
Length: 25 Ft
Color: Black

All About Your RCXFM20E-B:

All About Your RCX Series Cables:

Description:

Features:

Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
XLR Connectors with Internal Strain Relief for Rugged Reliability
100% Copper Conductors for Enhanced Signal Clarity
90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
Length: 20 Ft
Color: Black

How to set up your REQ231:

Video of REQ231:

Unboxing Video for REQ231:

The Rockville REQ231 is an extremely high quality professional rack mountable equalizer. This is a 2 channel equalizer with 31 bands per channel. The main focus on this was sound quality and making it rugged and tough. We wanted to build a professional product that will instantly make a good speaker sound better, and after months of testing we know we did it!

This graphic EQ also has a low cut crossover filter switch, with status LED, that helps remove rumble from mics. Another great feature is the bypass switch, with LED indicator, which is very convenient when doing sound checks.

We added a sub output with frequency controls which is something that we see a need for. Many brands for some odd reason do not give you a sub output and sub controls. We made sure to include this important function.

If you want the best sounding EQ on the market at a great price, then we highly recommend you try out our REQ231. If you are unsatisfied with the quality we will give you a 90 day money back guarantee including return shipping!

Features:

Rockville REQ231 Dual 31 Band 1/3 Octave Graphic Equalizer With Sub-Output
Dual channel (31 bands per channel)
Variable stage low and high cut filters
1/3 octave filter sets (ISO centers)
20 Hz to 20 kHz effective equalization range
Constant Q filters
Selectable 6dB or 12dB cut or boost range
Output level LEDs (-10 to +17 dB)
Bypass switch with status LED
Balanced XLR input/output
Subwoofer out
Channels: 2 (stereo)
Connectors: XLR balanced inputs and outputs
Bands: 31 per channel
Frequency Centers: 20 Hz, 25 Hz, 31.5 Hz, 40 Hz, 50 Hz, 63 Hz, 80 Hz, 100 Hz, 125 Hz, 160 Hz, 200 Hz, 250 Hz, 315 Hz, 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1 kHz, 1.25 kHz, 1.5 kHz, 2 kHz, 2.5 kHz, 3.15 kHz, 4 kHz, 5 kHz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 16 kHz, 20 kHz
Control Range: Selectable +/-12dB 0r +/-6dB
Input Impedance: 50k ohms
Output Impedance: 600 ohms
Maximum Output Level: +21dB
Level Control: +/- 10 dB
Signal to Noise: >93 dB
Distortion: 0.005%
Roll-off filters: 18dB/octave, Butterworth
Power Consumption: 15 watts
Weight Unpacked: 7.00 lbs.
Weight Packed: 9 lbs.
Width Packed: 5.87"
Height Packed: 20. 5"
Depth Packed: 9.62"
Voltage: 110 Volt (For this to work in a country that has 220V power you will need a step down transformer)

Video of RNRMR10:

Authorized Rockville Dealer!

Description:

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

Rockville RNRMR10 3.5mm 1/8" TRS to Dual RCA Cable
Nickel-Plated Plugs for Rugged Durability and Efficient Signal Transfer
100% Copper Conductors for Enhanced Signal Clarity
OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility
Length: 10 Ft

About Rockville Quality Control Procedures:

1 YEAR

UPC:
613815691976

Man Cave Audio System (2) 12" Speakers+Stands+Amp+Dual 31 Band EQ+12" Subwoofer

Items included in this bundle

Related Products

WAIT!

* LIMITED TIME OFFER! *

Man Cave Audio System (2) 12" Speakers+Stands+Amp+Dual 31 Band EQ+12" Subwoofer

New orders ship within 1 business day

90 Day Money Back Guarantee Including Return Shipping

Call for Expert Advice Call now: 1-646-758-0144

Items included in this bundle

Related Products

Call for Expert Advice
Call now: 1-646-758-0144