- (2) Peavey SP 2 SP2 2000 Watt 15" Passive 2-Way PA Speakers, Flyable - In White
- (1) Peavey VCM3 VCM 3 Mini Vocal Choir Microphone Church Stage Recording Mic - White
- (1) Rockville RPM870 8 Channel 6000w Powered Mixer w/USB, Effects, 8 XDR2 Mic Pres
- (1) Samson Stage v466 Quad - (4) Handheld Vocal VHF Wireless Microphones Mic System
® 2 White Two-Way, Full-Range/Bi-Ampable Sound Reinforcement System features a premium 15" BWX Black Widow® 4" diameter VC woofer with field-replaceable basket, RX 22CT compression driver, and Sound Guard™ III tweeter protection. Engineered for optimal sound reproduction with proven reliability continuing a 30-year legacy, Peavey SP enclosures feature exclusive asymmetrical Quadratic Throat Waveguide™ technology that helps deliver pristine, precise sound. Asymmetrical horn aims the coverage pattern 15° upward and 35° downward - directing sound to your audience, not over their heads.
Features:
- Peavey SP 2 SP2 2000 Watt 15" Passive 2-Way PA Speaker, Flyable - In White
- 15 inch BWX Black Widow 4 inch voice coil woofer
- Two-way, full-range bi ampable sound
- Peak Power: 2000 Watts
- RMS Power: 500 Watts
- Program Power: 1000 Watts
- Frequency Response: 54 Hz to 17 kHz,+/-3dB
- Sensitivity: 98 dB (1W/1m) anechoic
- RX™ 22 compression driver with ferrofluid cooling
- Patented Radialinear Planar Phase Correction System
- Sound Guard™ III tweeter protection
- Full-range inputs include a Neutrik® Speakon® 4 pin jack and two 1/4 inch phone jacks
- Hammertex durable covering material
- Patented Asymmetrical Quadratic Throat Waveguide™ technology
- Dimensions Front (HxWxD): 30.75" x 20.56" x 23"
- Dimensions Rear (HxWxD): 30.75" x 12.5" x 23"
- Weight: 71 lb
Advantages of purchasing from an authorized seller:
- Best prices - We sell all Peavey Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Peavey product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Peavey from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.???
#1 Authorized Peavey Internet Retailer!
Description of VCM 3 Choir Mic Wht:
The VCM 3 is a low-profile microphone designed primarily to be suspended above choirs, ensembles or stage areas for sound reinforcement with virtually no visual distraction.
The back-electret condenser capsule offers a smooth, tailored frequency response with a cardioid pickup pattern that is highly effective in suppressing feedback and unwanted noise.
The hanging adapter is a flexible, steel-spring wire used to facilitate positioning of the VCM 3 when suspended by its cable.
The VCM 3 comes with a 33' (10 m) small-diameter cable, allowing it to remain as inconspicuous as possible. This rugged, durable cable will fully support the VCM 3 and its hanging adapter.
This cable connects to a compact output module. The output module also adapts the smaller QG-type connector to the typical three-pin XLR for use with a standard microphone cable. This adapter operates on phantom power supply DC voltages between 9-52 volts.
Features:
- Available in Black and White
- Extremely small profile
- Smooth, wide-range frequency response
- Miniature, cardioid pattern, choir microphone
- Back-electret condenser element
- 9-52 Volt phantom power
- Includes 10-meter slim profile microphone cable, windscreen, and wire-form hanging adapter
- 33' miniature cable for long drops
- Weight unpacked: 0.60 lb (0.27kg)
- Weight packed: 0.86 lb (0.39kg)
- Width packed: 4.5" (11.43cm)
- Height packed: 9.5" (24.13cm)
- Depth packed: 3.25" (8.255cm)
Specifications:
- Frequency response: 50 Hz - 20kHz
- Sensitivity: -45 dB/Pa
- Rated impedance: 250 Ohms
- Minimum load impedance: 1k Ohms
- Maximum SPL: 140 dB
Advantages of purchasing from an authorized seller:
- Best prices - We sell all Peavey Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Peavey product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Peavey from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
All About Your RPM870:
How To Set Up Your RPM870:
What the Channels & Controls do on Your RPM870:
How To Set Up a Mic/Line/Instrument on Your RPM870:
How To Set Up Karaoke on Your RPM870:
How to Set Up Speakers on Your RPM870:
How To Set Up a Subwoofer to Your RPM870:
The Rockville RPM870 is an 8 channel powered console mixer with USB input. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mic preamps. We manufactured this mixer with XDR2 low noise mic preamps. These are some of the best sounding mic pre’s on the market. They compete in quality with any brand on the market! The next goal we had was versatility. This mixer has aux sends and returns on each channel so you can route your external effects easily. We also built in a 24 bit digital effects processor that sounds great. We didn’t include 99 effects which all sound the same. Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests.
We tested this and we ran the mixer to (2) Mackie C300Z speakers, and even with the volume turned up half way these were filling an extremely large room with sound! We also tested these with dual 15” DJ speakers and really cranked them and the sound of the highs and lows were crisp and clean. The great thing about this is the amp does not overheat even when cranking it for hours straight. The power amp built into this mixer is 500 x 2 RMS @ 8 ohms and 750 x 2 RMS @ 4 ohms. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings but RMS is the true continuous output power you should look at.
Other great features are a dual 7 band master EQ, a 4 band EQ on each channel, an EQ kill switch, and pad and solo buttons on each channel. Rounding things out, we added a USB input that has 2 functions. It can play back your audio tracks. But what is really cool is that you can record your main mix onto the USB! We also added bluetooth to this mixer to give you all the latest and greatest options.
90 Day Money Back Guarantee
The price point we are selling this at is about a third of what any other brand would charge. On top of this, we are offering a 90 day money back guarantee including return shipping. If you do not love this mixer, you can send it back and get all your money back and we will even cover the cost of return shipping. Just be sure to send it back including the original packaging.
Features:
- Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power
- RMS Power Output:
.....750w x 2 @ 4 Ohm
.....500w x 2 @ 8 Ohm
- Program Power Output:
.....1500w x 2 @ 4 Ohm
.....1000w x 2 @ 8 Ohm
- Peak Power Output:
.....3000w x 2 @ 4 Ohm
.....2000w x 2 @ 8 Ohm
- 8 Channel mixer section: 6 mono channels, 1 stereo channel
- 8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones
- XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pre’s on the market
- 1 dedicated USB input to play back music or record the main mix
- USB supported formats are MP3, WAV, WMA
- Built in bluetooth wireless audio streaming
- 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects)
- Effects level control can adjust signal level of each effect
- Effects mute button
- FX footswitch input lets you turn your effects on or off
- 4-Band EQ (high, high-mid, low-mid, low) per channel
- Each channel is equipped with pad, must, and solo buttons with LED’s
- Each channel has gain, aux control, FX control, Pan control, Volume control
- Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping
- Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch)
- Aux send and Aux returns on every channel to connect all types of external effects and processors
- You can control your monitor mix and check levels through your headphones
- Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED’s lit up
- Power and Output level LED indicators
- Main output fader allows you to fade the sound between the left and right channel
- RCA input, RCA output, and USB player
- Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R
- Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.
- When the pad button is pressed in the gain will adjust from 240dB to 0dB
- Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down. You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want
- Built in cooling fan and ventilation system
- USB input supports unlimited capacity (as many GB as you want)
- 110/220V switchable power supply
- Dimensions: (L*W*H) 15.16” x 17.72” x 7.09” inches / 38.5 x 45 x 18 cm
- Weight: 23.06Lbs. (10.46kg)
Authorized Samson Dealer!
Description of SWV466SHT6B:
Four At Once
Designed for four times the versatility, Samson’s Stage v466 Quad Vocal
Wireless System let’s you use four microphones simultaneously with a
single receiver. It’s the ideal wireless solution for vocalists, karaoke
performers, DJs or any application where multiple mics are needed.
At the core of the Stage v466 system is a full-rack quad VHF wireless
receiver. The receiver’s front panel features an RF channel indicator
and a large rotary volume knob for each channel. The receiver also
offers two tuned antennas, XLR mix, as well as four 1/4-inch outputs
that give you the option for each transmitter pair mixed or each
transmitter individually. The Stage 4v66 system comes with two 1/4-inch
to 1/4-inch cables.
The Stage v466 system includes four HT6 dynamic handheld microphone
transmitters, each with a Samson H6 dynamic microphone element for
capturing clear, accurate vocals. Each transmitter operates for up to
ten hours on a single 9-volt battery (four included) and offers a handy
audio on/off switch.
With the meticulous engineering, state of the art technology and
impressive audio capabilities that are built into every Samson wireless
system, the Stage v466 system ensures crystal clear operation and the
most dependable quad-channel performance available.
Everyone Loves A Quartet
The beauty of the Stage v466 system is that you can have all four
channels running simultaneously. This makes it perfect for a variety of
scenarios where multiple voices exist, including bands with multiple
singers. Beyond the system’s ability to capture stunning vocals in
musical settings, Stage v466 allows bands, quartets and other small
musical groups to add energy and movement to their performances.
Masters of Karaoke
The Stage v466 system is great for opening up your karaoke events to
more people. With four channels in play, you can spread out the stage
and avoid people from crowding around a single mic to belt out those
rock anthems or power ballads. And when an MC is running the show, the
Stage v466 system really helps with presentation and flow, eliminating
the need to hand-off the lone mic after every song.
DJ Teams
For DJs who work in teams, the Stage v466 system is a must. Whether at
weddings, block parties or clubs, this wireless system allows multiple
DJs to focus on hyping up the crowd, while another supports them from
behind the mixer. Or you can have four mobile DJs working different
parts of the venue. Either way, the Stage v466 makes for a really
versatile and entertaining DJ setup.
Escape The Podium
Not only is Samson’s Stage v466 ideal for public speakers looking to
shed the restraints of cords and wires, but for presentations that
involve up to four speakers at once. From company meetings and corporate
events to product demonstrations and Q&A sessions, the Stage v466
system allows small groups to be more interactive in conveying their
ideas to an audience.
Features:
- Samson Stage v466 Quad - (4) Handheld Vocal VHF Wireless Microphones Mic System
- B Band
- SR466 full-rack quad VHF wireless receiver
- Four HT6 dynamic handheld microphone transmitters, each with H6 dynamic microphone element
- Each transmitter operates for ten hours on a single 9-volt battery
- Great RF reception for interference-free performance
- One XLR and four 1/4-inch outputs (transmitter pair mix and individual channel output options)
- Includes two 1/4-inch to 1/4-inch cables, AC adapter and four 9-volt batteries
- Available in two groups
Advantages of buying from an authorized seller:
- Best prices - We sell all Samson Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Samson product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Samson from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
- UPC:
- 613815596905
