Package Includes:

• (1) Kicker 12" Car Stereo Subwoofer
• (1) Rockville Single 12" 1.0 cu.ft. 3/4" MDF Sealed Subwoofer Enclosure Box
• (2) Pairs of Rockville RV6.3A 6.5" 3-Way Car Speakers 1500 Watts/280 Watts RMS CEA Rated
• (1) Rockville dB55 4000 Watt/980 Watt Dyno-Certified RMS 5 Channel Amplifier Car Stereo Amp, Loud!
• (1) Rockville RWK21 2 Gauge Amp Wire Kit Copper RCA
• (2) Rockville RTR172 17 Foot 2 Channel Twisted Pair RCA Cable Split Pin 100% Copper
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

---

Video of RV6.3A:

Description:

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. We use top quality polypropylene cones which are known for their high damping qualities. This means they can have a controlled break-up, which results in a smoother high frequency roll-off. Our  Flexmotion Butyl Rubber Surrounds give the speakers a smooth response with minimal distortion. For smooth and extended high frequency sounds we used high temperature PEI dome tweeters with ferrite magnets. The RV-A series speakers are designed with superior SPL response and extremely high power handling making these perfect for use with the amp built into your receiver or with a high powered external amplifier. Due to their shallow mount design, these speakers fit in 97% of all vehicles.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world" wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

What’ so special about Rockville Speakers “in engineering terms".
The acoustic center of a driver is the point in the driver from which the sound appears to originate. What is crucial in a good multi-element design is the difference between the centers of the drivers. This is called relative acoustic offset. A good speaker design features phase accuracy in and around the crossover point, because the interaction of the drivers is most affected by the SPL magnitude and phase in this area. The Rockville designs allow for wide dispersion of the sound for complete musical immersion.

Audio power is the electrical power transferred from an audio amplifier to a loudspeaker, measured in watts. The electrical power delivered to the loudspeaker and its sensitivity determines the sound power level generated with the balance being converted to heat. Amplifiers are limited in the electrical energy they can amplify; loudspeakers are limited in the electrical energy they can convert to sound energy without distorting the audio signal or destroying them selves. These power ratings are important to consumers finding compatible products and comparing competitors. Because Rockville products are CEA rated, you can easily and accurately match any Rockville speaker to a CEA rated amplifier and be guaranteed of their performance match.

Features:

• Pair Rockville RV6.3A 6.5"/6" 3-way car speakers
  
• Peak Power Rating: 750 Watts per Pair / 375 Watts Each
  
• CEA Compliant RMS Rating: 140 Watts per Pair / 70 Watts Each
  
• Polypropylene woofer gives amazing bass and mids
  
• Flex Motion Butyl Rubber Surround
  
• 1.2" PEI dome tweeter with ferrite magnet give amazing highs
  
• 0.6" super tweeter
  
• Steel high quality basket
  
• Rubber magnet boot cover
  
• Frequency response: 34-20,000 Hz
  
• Sensitivity: 91 dB @ 1w/1m
  
• Mount depth: 2.12"
  
• Impedance: 4 Ohm
  
• Grilles included
  
• Aluminum voice coils
  
• 100% oxygen free copper voice coil windings
  
• Cotton spider material
  
• Copper terminals
  
• Cutout diameter: 4.92"
  
• Magnet: 8 Oz Y25 magnet
  
• Magnet dimensions: 80mm x 12mm
  
• Fs: 85.94 hz
  
• Re: 3.6 OHM
  
• Qes: 0.032
  
• Qts: 0.021
  
• Qms: 0.063
  
• Fits 6" and 6.5" openings
  
• Top mounting depth: 2.13" Inch (95% of installs use the top mounting depth)
  
• Bottom mounting depth: 2.44" inch (This measures the speaker from top to bottom)

---

Authorized Kicker Dealer! 

Video of 43CVR124:

Best in Class:
To get the most out of your amp, CompVR comes in two or four-ohm dual voice coils. Kicker red surround stitching binds the suspension perfectly to the cone, while SoloKon™ marries the woofer and back brace into one, cohesive system.

It's Cool:
KICKER uses an advanced heat management system. Perimeter venting allows air to circulate while our UniPlate™ system redirects even more heat away from the motor. You get a cool, reliable speaker that lasts and lasts.

Raw Power:
A stamped steel basket holds vibration at bay while a pair of high-temp voice coils move an injection molded woofer hundreds of times a second, giving you strong, distortion-free bass.

12" CompVR 4 Ohm:

• The CompVR 12-Inch Subwoofer is a 4O dual voice coil design, built for easy wiring.
• CompVR creates your bass using high-temp, dual voice coils. A ribbed Santoprene surround also gives the cone added strength under stress. The perimeter venting, Spiralead™ tinsel-lead technology, and spring-loaded push terminals are part of the high-performance engineering standards found on every KICKER woofer.
• The CompVR 12-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power.

Features/Specifications:

• Kicker 43CVR124 12" 800 Watt Dual Voice Coil 4-Ohm Car Stereo Subwoofer
• Power Handling :
• Peak : 800 watts
• RMS : 400 watts
• Size : 12"
• Injection molded SoloKon cone
• Ribbed Santoprene Surround
• Perimeter Venting
• Spiralead™ tinsel-lead technology
• UniPlate™ system redirects heat away from motor structure
• Stamped Steel Basket
• Spring-loaded Push Terminals
• 360 degree back bracing
• Dual 4-Ohm high-temperature voice coils
• Mounting depth : 6.25"
• Top-mount depth : 4-3/8"
• Cutout diameter : 11"
• Frequency Response : 25 - 350Hz
• Sensitivity : 87.1dB @ 1w/1m
• Resonance Frequency (Fs) : 32.7
• Subwoofer Design : Round / Circle
• Min Sealed Box Vol : 1 cu. ft.
• Max Sealed Box Vol : 4.6 cu. ft.
• Min Vented Box Vol : 1.75 cu. ft.
• Max Vented Box Vol : 2.25 cu. ft.
• Weather resistant - Suitable for marine use in additional to car applications
• We can ship Kicker products to the 48 continental United States

---

Advantages of purchasing from an authorized seller:

• Best prices - We sell all Kicker products at great prices
• Full Factory Warranty
• Lifetime Customer Service by Kicker product experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Kicker products from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

---

Video of dB55:

Description:

The dB55 is a 5 channel amplifier with 4,000 watts peak output and 980 watts Dyno Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS can be used to compare with top brands such as Kicker, Rockford, Alpine, etc. 

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, and mute and delay soft start technology. The dB55 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

The dB amps by Rockville use the top parts and components recommended by Rockville’s very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the world’s most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.

Each and every amplifier we manufacture is tested twice. Once at the semi-finished PCB stage of production, and then another test is done at the final assembly. We also run age tests on them. After this is all done, we hire a 3rd party independent company unaffiliated with our factory or with us to go to the factory and inspect 20% of all the production items. We test the power, the controls, and over 20 other tests. We guarantee these amps will satisfy you. We are so confident in your satisfaction of this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected we will send you a pre-paid shipping label and give you all of your money back. This means if for any reason you want to return the amplifier back for a full refund within 90 days, you can! (Amp must be complete along with the box).

Includes:

• Amplifier
  
• Bass Remote
  
• Birth sheet with tested power
  
• Owner’s manual
  
• Mounting Screws
  
• Warranty

Features:

• Rockville dB55 4000 Watt/980 Watt Dyno-Certified RMS 5 Channel Amplifier Car Stereo Amp, Loud!
  
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  - 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N
  - 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  - 2 Ohm 480 Watts x 4 + 2000 Watts x 1
  - 4 Ohm: 320 Watts x 4 + 1200 Watts x 1
• High-Speed MOSFET Power Supply
• Rugged switching MOSFETs for Class D in CH5
• Under Voltage Protection at 10V
• Over Voltage Protection at 16V
• Optical Coupler Class “AB" +“D" Technology
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz
• High Pass Filter: 15Hz – 4KHz
• Subsonic Filter: 15Hz - 55Hz
• Full IC-Controlled Protection Circuitry
• Remote Dashboard Subwoofer Control
• Fully Adjustable 12dB Bass Equalizer
• Mute and Delay Soft Start System
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• Minimum THD at Rated Power: < 0.05%
• S / N Ratio: >90dB
• Frequency Response: 15-35KHz
• Damping Factor: >100@ 100Hz
• 40 Amp x3
• Dimensions: (W x H x L) 9" x 2.4" x 18.6"
  

---

Video of RWK21:

Description:

The Rockville RWK21 2 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 2 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 150 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (1) sets of RCA cables.

Features:

• Rockville RWK21 2 Gauge Car Amplifier Wiring Installation Kit
• (1)  17' High Grade Twisted Pair of 100% Copper RCA Cable
• 17' 2 Gauge Translucent Blue SuperFlex Power Cables
• 17' 18 Gauge Blue Remote Cable
• 17' 16 Gauge Clear Speaker Wire
• 3' 2 Gauge Clear SuperFlex Ground Wire
• Gold Plated ANL Heat Resistant Fuse Holder
• 150 Amp ANL Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
  

---

Description of RTR172:

RCA cables are the backbone of your audio system. They are used for transferring audio and video signals. Without a proper cable and good signal, you can have a distortion, which would hold your system back from performing at its optimal capabilities. Don't ever settle for cheap RCA's because they will not provide a clean signal to your amplifiers or video sources.

These Rockville RCA cables are 100 % copper, and feature advanced technologies like triple shielding, magnetic interference rejection, woven outer shield, and more. The best way to ensure that you’ll have a good setup is to invest in good cables.

Features:

• Rockville RTR172 17 Foot 100% Copper 2-Channel Twisted Pair RCA Cable
• Oxygen Free Copper
• 100% Oxygen Free Copper
• Premium Audiophile RCA Interconnect Cables
• Split Pin Technology Ensures a Secure Connection
• Outstanding Noise Rejection, Accuracy, and Frequency Response
• Color Coded Channel Identification
• Length: 17-Foot
• Rockville 1 year warranty
• Also Available in: 3-Foot, 6-Foot, 12-Foot, 20-Foot and 25-Foot

---

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

---

Description:

Introducing Rockville Sub Enclosures!

The RS12 single sealed speaker box is made in the USA with Grade “A" ¾" MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is u