Package Includes:

• (2) Rockville RSG15.4 15” 3-Way 1500 Watt 4-Ohm Passive DJ/Pro Audio PA Speaker
• (1) Gemini XGA-4000 4000 Watt Professional DJ/PA Live Sound Power Amplifier XGA4000
• (1) (2) Rockville Tripod DJ PA Speaker Stands + Carrying Case Black RVSS2
• (2) Rockville RCSS1610 10' 16 AWG Speakon to Speakon Speaker Cable 100% Copper

---

How to Set Up Your Rockville RSG Speakers:

Video of RSG15.4:

Authorized Rockville Dealer!

Description:

We are proud to introduce to you the Rockville RSG series of speakers. These are affordable speakers with high-end performance; specially built for DJ's as well as professional audio applications. After conducting strategic market research, Rockville is proud to bring you this new line of speakers that were engineered to combine incredible power handling, superior sound and unbelievable build quality. The goal was to create a line of passive DJ speakers that were double as good as the competition but cost half as much.

The Rockville RSG-15.4 speaker system features a high quality 15" low frequency woofer with three electronic, high-efficiency piezo bullet tweeters and one high efficiency piezo compression horn tweeter that provide a true full-range of sound. This speaker produces an incredible amount of power. 1500 Watts peak, 1000 Watts Program Power, and 750 Watts RMS Power. With 80 Oz magnets, you can be sure these speakers will produce the power you expect out of them.

Constructed using thicker than standard, high-quality, high-density materials our cabinets are strong and rigid yet light weight enough to make travel and set-up a breeze. Built-in ergonomic, recessed handles give these speakers additional carrying ease, for all you DJ's who travel from party to party. The sturdy custom-molded steel grill protects the drivers combined with corner protectors, pre-mounted rubber isolating feet and durable, aviation grade black carpet make our speaker cabinets tough enough to withstand every day abuse.

Engineered from the ground up, the tapered trapezoidal shape, produces wide, clear sound dispersion that will reproduce your program source materials loudly, with accuracy and musical transparency.

Multiple inputs, typically found on high-end speakers are standard equipment on the Rockville RSG-15.4. Two input connectors, ¼” IN/OUT and speakON connection make the Rockville RSG-15.4 able to integrate in to any existing amplification system. Additional installation flexibility is available via the reinforced, built-in 35mm pole socket mount located on the underside of the cabinet.

So if you are looking for a top-of-the-line quality DJ speaker that is rugged, can handle lots of power and sounds incredible, then the Rockville RSG-15.4 has got you covered. Built-to-last, these speakers are protected by a full one year warranty.

Features:

• Rockville RSG-15.4 Carpeted Passive Loudspeaker
• Single 15” Pro Audio Woofer
• (4) Piezo 3" Bullet Tweeters
• (1) High Efficiency Piezo Compression Horn
• RMS Power: 750 Watts
• Program Power: 1000 Watts
• Peak Power: 1500 Watts
• 2.5” High Temperature Aluminum Voice Coil
• 4-Ohm Impedance
• Sensitivity: 102dB @ 1w/1m
• Frequency Response: 40Hz - 22 kHz
• SpeakON Input connection
• ¼” In/Out connections (Parallel)
• Dimensions: (20.5+13.2)x13.8x29.5in
• Weight: 39.24Lbs
• Pole Mountable
• Rubber Isolating Feet
• Construction: Top quality MDF - Stapled, Bonded & Braced

---

WHAT’S IN THE BOX:

• XGA-4000
  
• IEC Power Cable
  
• User Manual & Warranty Info
  

Description:

LIGHT AND EXTREMELY POWERFUL, ALWAYS A LOW PRICE
The XGA-4000 produces 4000 watts of Instant Peak Power, making it adept for PA systems and DJ rigs. Its durable construction offers reliable output night after night whilst being lightweight at just 25 lbs. This amplifier features front-to-rear airflow technology to ensure consistent performance. Get professional amplification performance and great value with the XGA-4000. The XGA-4000 is a versatile amplifier designed with the latest technology to deliver sound quality and power. It is a high-performing, reliable unit with efficient cooling technology and low maintenance needs, making it ideal for professional sound system applications.

Clean, Reliable Power in a durable 22 lb. enclosure. If you demand professional amplification performance, the XGA-4000 is perfect for delivering pure, consistent wattage night after night, year in and year out!  This system brings 4,000 watts of Instant Peak Power making it ideal for PA systems and DJ rigs. We’ve designed this with our patented front to rear airflow technology powered by a variable speed thermal stabilizer to guarantee seamless, reliable performance every single night!  Our XGA-4000 offers clean, dependable power in a lightweight body at an unmatched value.

PRO AMPLIFICATION
The Gemini XGA-4000 Professional Power Amplifier is designed for live sound reinforcement applications. Perfect for Venue installs and mobile rigs. The Gemini XGA series offers professional grade audio amplification at a consumer friendly price.

PURE POWER
The amplifier is rated to 2x 350W RMS at 4Ω stereo, 2x 250W RMS at 8Ω stereo, and 700W RMS at 8Ω bridged. It has a frequency response of 10 to 50,000 Hz at 1.5 dB with a signal to noise ratio of greater than 90 dB.

PRO GRADE CONNNECTIONS
The XGA-4000 amplifier features balanced XLR and balanced 1/4" inputs as well as unbalanced RCA inputs. For outputs, the unit features three Speakon connectors for channel A, channel B, and bridge as well as 5-point binding banana posts.

TOTAL CONTROL
The front panel features volume controls for Channels 1 and 2 for easy access. LED indicators for signal, clip, protect, and bridge keep you informed on the amp’s status.

BUILT TO LAST
Rugged all metal chassis with front to back vents and cooling fans to help protect the amplifier from thermal overload. It also features limiter, DC output, and short circuit protection circuits to safeguard your amp and speakers.

Features:

• 4000 Watt Peak high power output to drive professional loudspeakers without clipping
  
• Front-to-rear airflow and cooling fan for thermal stability and reliability
  
• XLR and ¼” (6.5mm Jack) balanced and RCA unbalanced inputs
  
• Limiter circuit switch for amp output protection
  
• Stereo and Mono Bridge
  
• Variable speed fan for low noise
  
• Comprehensive front panel indicators including signal, clip, protect and bridge
  
• 3 Speakon speaker outputs for Channels A/B/Bridge
  
• 5-way binding banana plug speaker outputs
  
• Bridge mode switch
  
• DC output protection and short circuit protection
  
• 10Hz – 50kHz frequency response at 1.5 dB
  
• Ground lift switch
  
• Total Harmonic Distortion: Less than 0.1%
  
• Input sensitivity & Impedance: 0.77v  
  
• Signal to Noise (20 Hz - 20 kHz) > 90dB
  

Specifications:

• Channels: 2 Channels
  

Power Output:

• 2x 350W RMS at 4 Ohms Stereo
  
• 2x 250W RMS at 8 Ohms Stereo
  
• 700W RMS at 8 Ohms Bridged
  
• Frequency Response: 10 Hz to 50 kHz
  
• Signal to Noise: >90 dB
  
• Total Harmonic Distortion: Less than 0.1%
  
• Inputs: XLR and ¼” balanced and RCA unbalanced 
  

Outputs:

• 3 Speakon outputs for Channels A/B/Bridge
  
• 5-way binding banana plug channel outputs
  
• Modes: Stereo & Mono Bridge
  
• Rack Size: 2U
  
• Voltage: 100V/250V / 50/60hz
  

Dimensions:

• Unit: 4.02" H x 14.77" W x 19.02" L
  
• Weight: 22.04 lbs.

---

All About Your RVSS2:

How to Set Up Your PA Speaker Stands:

Description:

This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment.

Includes:

• (2) Tripod Speaker Stands

Features:

• Adjustable Height
• Steel Construction
• Black Color
• Weight Capacity: 132 lbs
• Adjustable Height Range: 47-79 inches
• Base spread: 0-23 inches
• Tube Diameter: 1.38 inches
• Leg Diameter: 1.38 inches

---

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.

Great features and great quality make Rockville a great choice.

---

Video of RCSS SPEAKON CABLES:

Video of RCSS1610:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCSS16-10 16 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
• 100% Copper Conductors for Lower Resistance
• Black PVC Jacket for Both Durability and Flexibility
• Intended for High-Current Applications Only, Not Line-Level Signals
• Length: 10 Ft
• Gauge: 16