Package Includes:
- (2) Rockville RPG12 12" Powered Active 2-Way DJ PA Speakers Totaling 1600W
- (1) Rockville RBG15S 15" 1600w Active Powered PA Subwoofer w/DSP + Limiter Pro/DJ
- (1) Pair of Rockville Adjustable Tripod Speaker/Light Stands+(2) 20 Foot XLR Cables
Video of RPG12 :
How to Set Up RPG Series Speakers (RPG8, RPG10, RPG12, RPG15) :
Description:
The Rockville RPG12 powered PA speaker is simply amazing in terms of sound quality, and raw power! This speaker has an incredible 800 watts of peak power and will deliver a massive amount of bass, mids, and highs. The ultra-efficient design is amazing!
This speaker is the result of a year of research and development. We tested samples of 5 top selling powered speakers and the RPG series out-performed them all. These go louder and have punchier bass. What we found to be interesting was that some of the other speakers we tested against these were rated by their manufacturers at 1,200 watts or more, but they only went around half as loud as these.
The 12" woofer built into this speaker has a 2.5" aluminum voice coil which provides an extremely loud, deep, punchy bass response. Couple that with our state-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver and the ultra-wide dispersion, 40° large-format horizontal wave guide horn and you get beautiful full range concert-quality sound. The linear class A/B amplifier built into these speakers is efficient and provides clean power to the speaker. Some of the competing speakers use cheap amps in their speakers. We really went out of our way to make sure the amp built into these speakers gives you enough power so you can really feel and taste the music. The amplifier also has a clipping LED and a limiter to ensure long life to the speaker. The built in 2 band EQ will allow you to fine-tune and tweak the sound to your liking.
The RPG12 has a versatile trapezoidal enclosure design which allows you to use it as a PA speaker or you can use the included mounting brackets and lay it on its' side to be used as a floor monitor. It is also flyable and stand mountable giving you many options on how you can utilize these speakers.
We also included all the inputs and outputs you would need along with great controls. These have XLR and 1/4" ultra-low noise Mic / Line inputs with volume control as well as line RCA and XLR inputs with separate Gain adjustments. There is also an additional balanced line output via XLR for linking of additional speakers.
If you are in the market for a high quality 12" active speaker, then we highly recommend the RPG12. We feel this is the best value on the market. You get great features, great quality, high power, and a lot of versatility for a great price.
Features:
- Rockville RPG12 12" Active/Powered 800 Watts DJ/PA Speaker System
- 200-Watt RMS / 400 Watts Program Power / 800 Watts Peak
- High power long-throw 12'' woofer with 2.5" aluminum voice coil provides incredibly deep bass and acoustic power
- Frequency Response: 40Hz-20KHz
- Maximum SPL @1w/1m: 125dB peak / 122dB continuous
- High-power 2-way pro sound reinforcement speaker system for live sound and playback applications
- Compact and light weight system delivers distortion free sound even at extreme SPL
- Linear Class AB amplifier technology: high power, transparent sonic performance
- Internal switch-mode power supply for low distortion audio with superior transient response
- Built-in bass and treble equalization processor for ultimate system control and speaker protection
- State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction
- Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into cabinet
- Ultra-low noise Mic / Line input via XLR & 1/4-inch stereo jacks with volume control
- Line RCA and XLR input with separate Gain adjustment
- Additional balanced line output via XLR for linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning
- Flyable and stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor with included brackets
- Ergonomically shaped handle for easy carrying and setup
- High-quality components and exceptionally rugged high impact ABS construction
- Amplifier clip limit LED indicator & power LED cabinet rear
- Front display power meter Blue LED
- 110 / 220 Volt switchable power supply with external user serviceable fusing
- Dimensions : 16.73"X 12.75" X 23.11"
Rockville Bass Gig Series Active Subwoofers…Built to Blast!
How to Set Up your RBG15S:
Add serious low end to your gig with the Rockville Bass Gig RBG-15S powered subwoofer. This is an incredible sounding powered sub that features a 15" driver with up to 1600-watts of peak power for tremendous bass that can run all night without stopping. The subwoofer features a high temperature 4-layer 3” voice coil and is set in a 70oz magnet motor structure. The sound quality was just so much better, that we had to make this upgrade. Most brands on the market have smaller coils and lighter magnets. They will not perform or sound as good as the RBG15S. The amplifier features an internal heat sink with a heat sensitive, variable speed, auto turn-on fan cooling system, so even when your music gets HOT – your amp will stay cool.
You can tailor your sound using the built-in DSP (Digital Signal Processor), which allows you to either add extended boost or extended low frequency enhancement. The DSP circuit also controls over-excursion, thermal, and clipping protection which will ensure you can pound your subs hours straight without any damage occurring. This sub is built to last for years and years of use. A 3 position Low Pass crossover filters out the highs to make your system sound its best whatever venue you're in.
For added convenience and easy set-up, the RBG15S units feature combo XLR – ¼” TRS inputs with Level control and XLR thru puts to secondary units. Just connect your main mix outputs to the subwoofer, and then link your main speakers from the RBG15S! This sub features a heavy-duty pole-socket so you can mount your main speaker on top for easy setup and positioning and carry handles so you can easily transport it. Additional controls include a polarity switch, which allows you to invert the subwoofers polarity when installing the subwoofer away from the main speakers. This allows for near perfect time alignment of the subwoofer low-end frequencies to your main speakers.
Lets talk power for a second. Different brands have unique ways of rating their products. So off brands might just make up crazy peak power ratings and write things like 10,000 watts. Premium brands will generally give you legitimate RMS power ratings. So let me explain our ratings and our thought process. This powered sub is 400 watts RMS rated. This is the true continuous power rating. So if a premium brand such as Yamaha or Mackie were to build this same subwoofer, this is around the same RMS rating they would rate it at. 800 watts program power is basically a safe number the sub can handle during peak power of the songs but at an average volume level. This is the way some middle-of-the-road brands would rate it. The peak power of 1,600 watts is what the sub can produce for a split second during the loudest point of a song at full volume. I have seen entry level brands write 4000 watts on subs with less than half the power of this one. Our peak rating is actually a legitimate peak rating, however peak ratings are not important and can vary greatly depending on many factors.
Features
- Rockville RBG15S 15" 1600 Watt Active Powered PA Subwoofer
- 400 Watts RMS / 800 Watts Program / 1600 Watts Peak Power
- 15" Woofer with 70oz Magnet and 3” Voice Coil
- Frequency Response: (+/-3dB) 29Hz - 150Hz
- Maximum SPL @ 1w / 1m: 120dB Peak / 115dB Continuous
- DSP Digital Signal Processor with Boost for Extended Low Frequency Control
- Power-On and Signal Input LED Indicators
- Signal Input LED Indicator
- Clip Limiter Circuitry with LED Indicator
- Balanced XLR + TRS input jacks
- Balanced XLR thru/output jacks for parallel connections
- Passive heat sink with heat sensitive variable speed auto turn-on fan for cooling
- Subwoofer Crossover 80Hz/100hz/120HZ Low Pass
- Subwoofer Level Adjustment
- Subwoofer Phase Control
- Built-in pole mount socket
- Built-in carrying handles
- Custom metal grill
- Durable black carpet with black metal corners
- 7-layer Birch 5/8” plywood baffle construction
- Aluminum former voice coils with copper winding
- Dimensions: 23.25" x 20.75" x 19.75"
- Weight: 73Lbs
All About Your RVSS2-XLR:
How To Set Up Your RVSS2-XLR:
How To Set Up Active and Passive Speakers to Your RVSS2-XLR:
How to Set Up Your PA Speaker Stands:
Video of RVSS2-XLR:
Description:
This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment. This package also comes with two 20 foot XLR cables
Features:
- Adjustable Height
- Steel Construction
- Black Color
- Weight capacity: 100 LBS
- Adjustable Height Range: 47.25-78.75 inches
- Base spread: 15-40 inches
- Tube Diameter: 1.5 - 1.37 inch
- Leg Diameter: 1.37 inch
- Includes (2) 20 Foot XLR Female to XLR Male Cables
- Includes (1) Travel Bag
- UPC:
- 613815628637
