Package Includes:

• (2) Rockville RPG10 10" Powered Active 600 Watt 2-Way DJ PA Speaker System
• (1) Pair of Rockville PARTY STAND LED DJ Tripod Speaker Stands+RGB Remote+Sound Activated
• (2) Rockville RCXFM20E-B 20 Foot Nickel Plated Female to Male XLR Microphone Cable

---

Video of RPG10:

How to Set Up RPG Series Speakers (RPG8, RPG10, RPG12, RPG15) :

The Rockville RPG10 powered PA speaker is simply amazing in terms of sound quality, and raw power! This speaker has an incredible 600 watts of peak power and will deliver a massive amount of bass, mids, and highs. The ultra-efficient design is amazing!

This speaker is the result of a year of research and development. We tested samples of 5 top selling powered speakers and the RPG series out-performed them all. These go louder and have punchier bass. What we found to be interesting was that some of the other speakers we tested against these were rated by their manufacturers at 1,200 watts or more, but they only went around half as loud as these.

The 10" woofer built into this speaker has a 2" aluminum voice coil which provides an extremely loud, deep, punchy bass response. Couple that with our state-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver and the ultra-wide dispersion, 40° large-format horizontal wave guide horn and you get beautiful full range concert-quality sound. The linear class A/B amplifier built into these speakers is efficient and provides clean power to the speaker. Some of the competing speakers use cheap amps in their speakers. We really went out of our way to make sure the amp built into these speakers gives you enough power so you can really feel and taste the music. The amplifier also has a clipping LED and a limiter to ensure long life to the speaker. The built in 2 band EQ will allow you to fine-tune and tweak the sound to your liking.

The RPG10 has a versatile trapezoidal enclosure design which allows you to use it as a PA speaker or you can use the included mounting brackets and lay it on its' side to be used as a floor monitor. It is also flyable and stand mountable giving you many options on how you can utilize these speakers.

We also included all the inputs and outputs you would need along with great controls. These have XLR and 1/4" ultra-low noise Mic / Line inputs with volume control as well as line RCA and XLR inputs with separate Gain adjustments. There is also an additional balanced line output via XLR for linking of additional speakers.

If you are in the market for a high quality 10" active speaker, then we highly recommend the RPG10. We feel this is the best value on the market. You get great features, great quality, high power, and a lot of versatility for a great price.

Features:

• Rockville RPG10 10" Active/Powered 600 Watts DJ/PA Speaker System
• 150-Watt RMS / 300 Watts Program Power / 600 Watts Peak
• High power long-throw 10'' woofer with 2" aluminum voice coil provides incredibly deep bass and acoustic power
• Frequency Response: 45Hz-20KHz
• Maximum SPL @1w/1m: 122dB peak / 119dB continuous
• High-power 2-way pro sound reinforcement speaker system for live sound and playback applications
• Compact and light weight system delivers distortion free sound even at extreme SPL
• Linear Class AB amplifier technology: high power, transparent sonic performance
• Internal switch-mode power supply for low distortion audio with superior transient response
• Built-in bass and treble equalization processor for ultimate system control and speaker protection
• State-of-the-art 1.35'' Japanese made pure titanium-diaphragm compression driver for crystal clear high-frequency reproduction
• Ultra-wide dispersion, 40° large-format horizontal wave guide horn molded directly into cabinet
• Ultra-low noise Mic / Line input via XLR & 1/4-inch stereo jacks with volume control
• Line RCA and XLR input with separate Gain adjustment
• Additional balanced line output via XLR for linking of additional speaker systems
• Versatile trapezoidal enclosure design allows different positioning
• Flyable and stand mounting with 35-mm pole socket
• Ergonomically shaped handle for easy carrying and setup
• High-quality components and exceptionally rugged high impact ABS construction
• Amplifier clip limit LED indicator & power LED cabinet rear
• Front display power meter Blue LED
• 110 / 220 Volt switchable power supply with external user serviceable fusing
• Dimensions : 14.21" X 10.87" X 19.72"

Owner’s Manual

---

HOW TO SET UP YOUR PARTY STAND LED:

Party Stand LED Product video:

 

What's in the BOX of PARTY STAND LED:

• (2) LED stands
  
• RF remote
  
• Lighting controller module
  
• (2) 20 foot cables that go from each LED stand to the controller module
  
• Power supply
  
• Travel bag to hold both stands
  
• Owner manual and warranty card
  

The Rockville PARTY STAND LED is a pair of speaker stands with build in RGB LED lighting and an included lighting controller module. Our model is different and better than any other LED stand on the market.

1.We include a lighting controller module which connects to both stands. So the 2 stands are completely synced.
2.We include an RF remote that has a distance of 100 feet and even will control the lights through walls.
3.The lighting controller has a built in mic and sensitivity knob allowing you to beat sync the stands to your music with different mode options. We have the most lighting modes out of any stand on the market

Sound activated modes:

• Strobe (blinks to the beat of the music). In this mode you can select the color or select multi-color strobe.
  
• Spectrum analyzing EQ mode (this mode looks like a spectrum analyzer equalizer dancing to the beat of the music.)  In this mode you can also select the color or select multi-color.
  

Regular modes:

• Solid colors (selectable single color or multi color)
  
• Waterfall effect mode
  
• Fade mode
  
• Strobe mode
  

Features:

• Pair Rockville PARTY STAND LED DJ Tripod Speaker Stands+RGB Remote+Sound Activated
  
• Height adjustment:  4 ft - 6.16 ft
  
• Load Capacity: 66 lbs.
  
• Standard 35mm pole mount is compatible with any standard PA speaker on the market
  
• Material: Steel + Polycarbonate
  
• Includes RF remote
  
• 4 Dynamic Modes
  
• 7 Static Color options + multi color (White/Red/Green/Blue/Yellow/light blue/Purple)
  
• Demo Program Mode
  
• Includes lighting controller with sensitivity knob that connects to both stands
  
• (2) stands always stay in sync
  
• RF Remote Distance 50-100 Feet (even through walls)
  
• Power Requirement for Stand: 12V, 2A
  
• Non-slip rubber feet
  
• 5 levels of height adjustment with Hand tightening knob + safety bolt mechanisms
  
• Adjustable Tripod legs
  
• Diameter of Opened Legs: 3.44 ft. width/diameter all around
  
• Tube Diameter: 1.38 inches
  
• Leg Diameter: 1.38 inches
  
• Stand Weight: 5.5 lbs. each

Owner's Manual​​​

---

Video of RCXFM20E-B:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
 
 The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCXFM20E-B 20 Foot Nickel Plated Female to Male XLR Microphone Cable
• XLR Connectors with Internal Strain Relief for Rugged Reliability
• 100% Copper Conductors for Enhanced Signal Clarity
• 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
• Length: 20 Ft
• Color: Black