Package Includes:

• (2) Pairs of Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles
• (1) Rockville MS10LB 10" 2400 Watt Black Marine/Boat 10" Free Air Subwoofer with LED
• (1) Memphis Audio MXA850.5M Marine/Boat 5 Channel Amplifier Amp (100x4 + 450x1)
• (2) Pairs of Rockville MAC65W 6.5" White Aluminum Wakeboard Tower Speaker Pod Enclosures

---

All About RKL65MBW:

How To Install Kick Panel Speaker Pods In A UTV:

Includes:

• Pair of 6.5" Marine LED Speakers
• 16.4 feet of Speaker Wire
• Stainless Steel Mounting Screws
• Black and White Grills Included

Features:

• Pair Rockville RKL65MBW 6.5" 2-Way 700 Watt Marine Boat Speakers with LED Lights
• CEA Compliant Power Ratings
• True Coax Design With the Tweeter Completely Separated From the Cone
• Larger Cone Surface Area Gives Better Mids and Lows
• Less Mass Attached to the Cone Allows for Higher SPL and Sensitivity
• True coaxial design allows for superior sound quality, better stereo separation, and clearer mids and highs
• Power Rating: 350 Watts Peak/85 Watts RMS Per Speaker
• Total Power: 700 Watts
• Beat sync LED's flash to the rhythm of the music
• You can select either red or blue color LED's on the wire harness
• No extra installation for the LED. It gets a power signal through your speaker wire
• The louder the music the more intense the LED's flash
• Black and White detachable Grills
• Fully Marinized Against Salt & Fresh Water Conditions
• UV treated cone makes this completely Waterproof and rustproof
• Anti-corrosion Stainless Steel Terminals
• Molded ABS plastic for amazing sound and protection from the elements while out on the water
• Polypropylene Formed Cone
• 10 Oz Y30 top of the line magnet supports high power handling
• Rubber Surround
• High quality ferrite magnet
• 1" inch Polymer Tweeter
• Oversized 1" CCAW Kapton Voice Coil
• Pre-installed Stainless-Steel mounting screws included
• Perfect for Marine, Car, ATV and UTV applications
• Impedance: 4-Ohm
• Frequency Response: 35Hz - 20KHz
• Sound Pressure Level: 90dB @ 1w/1m
• Total Diameter: 7.3"
• Cutout Diameter: 5.6"
• Total Height: 3.86"
• Mounting Depth: 2.56"

---

Video of MS10LB:

Unboxing Video of MS10LB:

Description:

The MS10LB is one of the most powerful marine subwoofers on the market. What really makes this sub stand out is the sound quality and durability. It goes so loud that if you crank it up, boats that are thousands of feet away can feel the bass. The frequency range of these subs are so good that it will make all your songs sound so much better! These play frequencies that normal full range speakers cannot hit, adding depth and richness to all your music.

This subwoofer has a double-stacked 80 Oz magnet! They are twice as large as almost any other marine sub on the market, which is why these can handle so much power. In addition, the MS10LB has a fantastic sensitivity rating at 90dB, which means even if you have a smaller amplifier, the subwoofer is sensitive enough that it will still sound great.

The MS10LB was designed in a molded ABS plastic basket that is made with a special blend that is waterproof and un-breakable. You can literally jump on it and hit it with a sledgehammer without it breaking!

Using only true marine grade components and materials, the Rockville MS10LB subwoofers are fully marinized against salt & fresh water conditions. These subs are completely waterproof and protected from the elements! They are UV treated and have a special waterproof coating to prevent water damage. These subwoofers also come with a 1 year warranty to give you the peace of mind you deserve when purchasing from Rockville!

Features:

• Rockville MS10LB 10" Marine Free Air Subwoofer with LED (Black)
• Free air subwoofer does not require any enclosure
• Max Power: 2400 Watts
  
• RMS Program Power: 1200 Watts
  
• RMS Power: 600 Watts
  
• Polypropylene cone with Rubber edge
  
• 2.0" 4 Layer dual voice coil
  
• Molded ABS plastic basket made with a special blend that is waterproof and un-breakable (if you literally jump on it, it will not break or bend)
  
• Magnet 80 Oz double stacked magnet
  
• Frequency response: 30Hz-4Khz
  
• Impedance: Dual 4 ohms
  
• Sensitivity: 90dB
• Total diameter:10.55"
  
• Cutout diameter:9.0”
• Mounting depth:5.6"

Specifications:

• Free Air Resonance (Fs): 31.05 Hz
  
• Electrical “Q” (Qes): 0.5577
  
• Mechanical “Q” (Qms): 2.3313
  
• Total Speaker “Q” (Qts): 0.45
  
• Equivalent Compliance (Vas): 1.676 cu ft / 47.4728 L
  
• One-Way Linear Excursion (Xmax): 0.41 in / 10.5 mm
  
• Reference Efficiency (No): 0.25%
  
• Efficiency (1 W / 1 m): 86.7 dB SPL
  
• Effective Piston Area (Sd): 51.15 sq in / 0.033 sq m
  
• DC Resistance (Re): 3.4 O

---

Description of MXA850.5M:

Memphis Xtreme Audio amplifiers are water and element resistant and designed for use in the harshest conditions. Whether you need power to kick sound from a wake tower or want to keep the party going at the dunes, these amplifiers are engineered to withstand anything you throw at them.

Features:

• Memphis Audio MXA850.5M Marine/Boat 5 Channel Amplifier Amp (100x4 + 450x1)
• Water and element resistant conformal coated circuit board
• Efficient class D design
• Variable bass boost (MXA600.1M & MXA850.5M)
• Remote level control included (MXA600.1M)
• Cabin/tower/sub 3 channel remote included MXA850.5
• Subsonic filter
• Bright blue Memphis LED accent strip
• Waterproof control cover

Specifications:

• RMS POWER 4-Ohm: 60w x 4 + 175w x 1
• RMS POWER 2-Ohm: 100w x 4 + 300w x 1
• RMS POWER 1-Ohm: 450w x 1
• Bridged/Mono Power 4-Ohm (w): 200w x 2 + N/A
• THD% 4Ohm: <1%
• Frequency Response: 10Hz - 45kHz
• Dimensions L x W x H: 13.4" x 6.10" x 2.16"
• Warranty (years): 2 Years
• Input Range: 110mV - 8V
• Recommended Amp Kit: 4 AWG KIT

---

Video of MAC65W:

Includes:

• 2 Wakeboard Cans
  
• All mounting hardware
  
• (2) 2.375” rubber inserts
  
• (2) 2.25” rubber inserts
  
• (2) 2.5” rubber inserts
  
• (2) 2” rubber inserts
  

Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC65W comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter.  Six precision molded high impact rubber inserts guarantee fitment on towers from 2” to 2.5”. Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!

These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC65W features a white powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading.  They are fully marinized which means they’ll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!

The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Kicker, Rockford Fosgate, etc. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.

Features:

• Pair of Rockville MAC65W white aluminum can wakeboard tower enclosures
  
• Made of high quality 6061 aircraft grade aluminum
  
• Beautiful white powder-coat finish
  
• 100% waterproof and fully marinized against salt and fresh water conditions
  
• Internally wired for clean install—no exposed wires or terminals
  
• High efficiency design features the perfect airspace for 5.25" speakers
  
• Rugged universal mounting clamps made of 6061 aluminum
  
• Includes precision molded, high impact plastic inserts for tower fitment from 2” diameter to 2.5” diameter
• Mounting Depth - 6.7"
• Total Depth - 9.15"
• Cutout - 5.55"
• Diameter - 7.39".
• Mounting diameter - 6.4"  (Narrow diameter - 6.12")
• Height of mount - 3.75"
• Total height of unit - 11"

*Although the pre-drilled holes will accommodate most speakers on the market, there may be some that don't fit. If that is the case you can drill holes into the lip of the can to line up with your speaker's mounting holes.