Package Includes:
- (2) Presonus R65 V2 6.5" 140w Bi-Amped Active Studio Reference Monitor w/AMT Tweeter
- (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
Description:
You won't miss a thing.
Clarity is king—and with the R65 V2s, you'll hear every single detail in your music: the gentle breath in every exhale, the subtle finger noise in a nylon-string classical guitar; the nuanced overtones of brass and woodwinds; and exquisite reverb tails that decay gracefully into the void. Not only will your mixes sound their absolute best on R65 V2, but you'll also be able to hear trouble spots in your tracks with surgical clarity. If you're mixing or mastering high-resolution audio, the R65 V2 will ensure that you'll hear every detail captured in your recordings.
Air and transient response.
Driven by a dedicated 65 watt Class A/B amp, the R65 V2's custom-designed 6.8-square-inch Air Motion Transformer (AMT) excels at accurate reproduction of the highest of high frequencies—those responsible for a sense of air, space, and dimensionality. And the AMT's astonishingly thin (< 0.01 mm) folded Kapton® membrane allows the tweeter to move in the same instant as the voltage cycles that power it, providing nothing less than wave cycle-accurate transient reproduction.
Wide with pride.
The unique AMT design also allows the R65 V2 to handle 8 to 13 times the projection area of more traditional tweeter designs, while the R65 V2's unique housing constrains this projection area to the horizontal axis. The result is a very wide sweet spot with focused vertical dispersion, —minimizing reflections off of your desk, ceiling, and floor that could otherwise introduce problematic phase and coherence issues. And because it's less subject to room-anomaly interference, the R65 V2 studio monitor reacts predictably and sounds consistent, even if moved to different listening environments.
The lowdown on the down-low.
R65 V2's woofer is six and a half inches of rigid, custom-woven composite that offers consistent dispersion across its frequency range for the flattest response we could design. A dedicated 75 watt Class A/B amplifier provides ample headroom and impressive distortion-free, non-fatiguing performance—even at higher volumes.
The new versatility.
Improving the respected R-series classics wasn't easy, but we found a way: by giving you more control than was available on the original R65. The updated R65 V2 features analog acoustic tuning controls that will be familiar to users of our celebrated Eris® line—you get Low Cut, Mid Frequency, and High Frequency controls, as well as a three-way Acoustic Space switch that allow you to easily compensate for the sonic consequences of speaker placement against a wall or in a corner. We also added a new Class A/B amplifier to provide an even warmer and smoother overall frequency response.
Studio monitor connections.
Of course, you also get classic PreSonus monitor connectivity, as R65 V2 provides balanced XLR, balanced ¼-inch TRS, and unbalanced RCA line-level inputs, so you can hook them up to an audio interface, mixer, monitor controller, or almost any other line-level source. If you'd like to add Bluetooth connectivity.
Accuracy defined.
The R65 V2 studio monitor provides lifelike audio reproduction that will allow you to hear the room in your recordings. Its transparent sound and responsive transient reproduction makes it an ideal solution for anyone who is mixing high-resolution audio. The exact same AMT technology that provides the R65 V2's natural-sounding, honest playback also ensures that potential trouble spots in your mixes won't slip past your critical ear.
Hear the R65 V2 studio monitors at your favorite PreSonus® dealer.
Features:
- 2-way active AMT tweeter design provides articulate high-frequency response, wide stereo imaging, and narrow vertical dispersion
- Custom-designed, 6.8-inch, AMT tweeter responds to the subtlest waveforms and the highest frequencies for audiophile-grade air and space
- 6.5-inch LF drivers provide transparent mid- and low-frequency reproduction for clean, punchy bass
- Biamped, 140 W RMS (LF = 75 W, HF = 65 W) Class A/B power amplifier with switching power supply
- Acoustic tuning controls (Low cut, Mid, High, Acoustic Space) compensate for room acoustics and placement
- Studio One Prime and Studio Magic Software Suite ($1,000 value!)
- Balanced XLR and ¼-inch TRS plus unbalanced RCA inputs provide flexibility for seamless integration into any environment
- Toroidal power transformer eliminates noise and hum
- System protections include RF interference, output current limiting, over-temperature, turn-on/off transient, subsonic filter, external mains fuse
- Power: 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz
Specifications:
Inputs
- 1- Balanced XLR
- 1- Balanced ¼" TRS
- 1- Unbalanced RCA
Performance
- Frequency Response: 45 Hz - 22 kHz
- Crossover Frequency: 2.7 kHz
- LF Amplifier Power: 75W Class AB
- HF Amplifier Power: 65W Class AB
- Peak SPL (@ 1 meter): 104 dB
- LF Driver: 6.5" woven composite
- HF Driver Type: AMT
- Diaphragm: 6.8-inch2 (4,400 mm2)
- Equiv. Diaphragm ø: 3" (75 mm)
- Input Impedance: 20 kO balanced, 10 kO unbalanced
- SNR (typical, A-weighted): >100 dB
User Controls
- Volume Range: A-type taper
- High-frequency Control: +/- 6dB shelf @ 10kHz
- Mid-frequency Control: +/- 6dB @ 1kHz
- Low Cut: Flat, 80Hz, or 100Hz
- Acoustic Space: Flat, -2dB or -4dB
Protection
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
Power
- Factory preprogrammed: 100-120V ~ 50/60 Hz or 220-240V ~ 50/60 Hz
- Standby Power: < 0.5W
Cabinet
- Vinyl-laminated, medium-density fiberboard
Physical
- Width: 8" (203 mm)
- Depth: 10.3" (261 mm)
- Height: 13" (328 mm)
- Weight: 14.7 lbs (6.65 kg)
Includes:
- PRO-M50 headphones
- Detachable cable
- Soft suede and leather ear cushions (interchangeable)
- Leather hard travel protective case
- Gold plated ¼" adapter
All About Your PRO-M50:
Description:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
- Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
- Professional High-Definition Studio Headphones
- 40mm Neodymium drivers
- Ergonomically designed swivel ear cups
- Supreme sound isolation
- Accurate sound reproduction
- Minimal bleed
- Sturdy and durable steel headband and arms
- Soft leather headband cover
- Interchangeable leather and soft suede ear cups covers included
- Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
- Gold plated 3.5mm connector
- Gold plated ¼" adapter
- Hard leather carrying case
- Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
- Style: Closed-Back
- Design: Circumaural
- Transducer Type: Dynamic
- Driver: 40MM
- Sensitivity: 97±3dB
- Impedance: 32ohm
- Frequency Response:10Hz - 25KHz
- Max. Power: 600MW
- Rating Power: 260MW
- Net Weight: 290g (with cable)
All about Your RCM03:
Description:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Metal Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB (0dB=1V/Pa at1kHZ)
- Output Impedance: 200O±30% (at 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V-10V
- Current Consumption: Less than 500uA
- Voltage Deduction Characteristic: within 3dB at 2V
- S/N Ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
- Load Impedance: Greater or = to 1000 Ohms
- Equivalent Noise Level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
- Electrical Current: Greater than 4.8Ma
- Microphone Body Net Weight: 320 Grams (0.7 Pounds)
- Microphone Max.diameter: 44mm (1.73" inches)
- Microphone Length: 217mm (8.54" inches)
- Microphone Material: Steel grille + Alluminum (handheld part)
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.- UPC:
- 613817085162
