Package Includes:

• (2) Peavey PVX 10 800 Watt 10" Passive 2-Way Pro Audio PA DJ Speaker Monitor PVX10
• (2) Rockville RTP32W Totem Moving Head Light Stand+Black+White Scrims+Carry Bags

---

Authorized Peavey Dealer!

Video of PVX10:

Description of PVX10:

The PVX 10 is a two-way sound reinforcement system based on a heavy-duty 10" woofer and a RX10N titanium diaphragm dynamic compression driver mounted on a 100° x 60° coverage Quadratic Throat Waveguide. Its sleek modern appearance coupled with excellent performance offer an outstanding package.

The lightweight yet rugged injection-molded plastic enclosure with molded-in stand mount cup facilitates portable use for live music or PA sound. The trapezoidal cabinet has two handles for ease of portability, and an extra 45° angled section on the right side to allow use as a floor monitor. Four sets of flying/mounting points, two on the top, two on the bottom, and a pull-back point on the rear, with a total of 13 cabinet inserts, provide for the ultimate in installation flexibility. A black powder coated perforated steel grille provides driver protection and a professional appearance.

The heavy-duty 10” woofer has a 2.4” voice coil diameter, and a 50 oz. magnet for 200 watts continuous worth of thumping bass. The RX 10N compression driver tweeter is coupled to a Quadratic Throat constant directivity waveguide, with smooth, even response, low distortion and good high frequency dispersion. This horn has an asymmetrical vertical polar response, aiming the main energy lobe down 10°, so it is aimed at the audience, instead of over their heads. This helps reduce ceiling reflections for greater clarity and gain before feedback.

The PVX 10 speaker system is rated at 400W program power handling, and the full crossover network includes high voltage film capacitors, high current inductors, and high frequency driver protection for clear punchy sound, and excellent long-term reliability. A 4-pin twist-lock connector and a ¼” phone jack input make hook-up a breeze.

The cabinet of the PVX 10 speaker system has multiple mounting fly points, providing outstanding versatility in permanent install use. A widely spaced pair of M8 inserts molded-in on the top and the bottom for use with eyebolts, and a set of four M8 inserts is available on the top and on the bottom, those in the pattern used for the Peavey VM70 mounting bracket. A pull back point is provided on the rear near the bottom. 

This is a total of 13 mounting inserts in all. All of these inserts have large retaining hardware on the inside of the plastic cabinet, providing a more reliable and safe mode of mounting the cabinet

Features:

• Peavey PVX 10 800 Watt 10" 2-Way Pro Audio PA Speaker
• Program Power Handling: 400 Watts
• Peak Power Handling: 800 Watts
• Two-Way Sound Reinforcement Enclosure
• Crossover Network For Driver Protection And EQ
• High Frequency Driver Protection
• Durable Plastic Injection-Molded Trapezoidal Enclosure
• Asymmetrical Horn Aims The Sound Down 10 Degrees, At The Audience, Not Over Their Heads
• Full-Coverage Heavy-Duty Perforated Steel Grilles, With Powder Coat Finish
• Pole Mount Molded-In
• Top And Bottom Flying Point Inserts
• Patented Quadratic Throat Waveguide Technology, 100° x 60° Coverage
• RX 10N Compression Driver, With 1" Titanium Diaphragm
• 10" Heavy-Duty Woofer With 2.4" Voice Coil & 50 Oz. Magnet
• Extra Angled Section On Right Side Allows Floor Monitor Use
• Product Weight: 25 lb
• Product Dimensions (H x W x D): 20" x 12.7" x 11.06" inches

---

How to set up your RTP Totem Stands:

Video of RTP Totem Stands:

 

What's In The Box:

• (1) Podium Stand
• (1) White Scrim
• (1) Black Scrim
• (1) Bag for Main Frames Base, and Top Support Legs
• (1) Bag for Top Plate and Base Plate
• (1) 35mm Pole Mount Adaptor
• Non-slip foam EVA pads
• (1) 8mm Thumb Bolt and Washer Pack
• Warranty Card
• Owner's Manual

Features:

• Rockville RTP32W Totem Pole Moving Head Light Stand+Black+White Scrims+Carry Bag
• Perfect for lights, speakers, monitors, etc.
• Adjustable height from 39" inches to 68.8" inches
• Requires no tools for assembly and can be assembled within a couple minutes
  
• Designed for maximum stability even at its top height of 69" inches
• Includes 2 sets of scrims (black and white)
  
• Includes 2 travel bags for easy transporting
• Includes 35mm pole mount speaker adapter for mounting speakers
• Non-slip foam EVA pads can be attached to the top plate
  
• Velcro cable ties included for neat cable management
• Unique, spring loaded turn and lock mechanism for easy height adjustment
• Base and top plate have integrated transport handles
  
• Includes frame support bars to assist with stability 
  
• Includes 8mm quick release thumb screws and bolts for easy assembly
  
• Color: White
• Base plate (W x D x H): 19.6" x 19.6" x 0.11" inches
  
• Top plate (W x D x H): 11.8" x 11.8" x 0.11" inches
• Unit dimensions for transport (W x D x H): 19.6" x 19.6" x 39" inches
  
• Maximum weight that the unit will support: 132lb
• Unit Weight: 37 Lbs.