Package Includes:

• (2) Rockford Fosgate Punch P2D2-15 800w RMS 15" Dual 2-Ohm Car Audio Subwoofers
• (1) Rockford Fosgate R750-1D 750 Watt Rms Class D Mono Amplifier Car Amp
• (1) Rockville RWK41 4 Gauge Complete Wire Kit w/RCA's

---

Description of P2D2-15:

Rockford Fosgate has always been known as "The PUNCH" and the P2 15" subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.

Features:

• Rockford Fosgate Punch P2D2-15 400w RMS 15" Dual 2-Ohm Car Audio Subwoofer Sub 
• Dual linear spider with embedded 16 AWG tinsel leads
  
• Custom 10-AWG nickel plated push terminals
  
• Extended pole piece and bumped vented backplate
  
• High-temp voice coil with spun-laced Nomex® re-inforcement collar
  
• Protective PVC textured magnet cover
  
• Kevlar fiber reinforced paper cone
  
• StampCast basket with integrated spider venting
  
• Diamond cut cast aluminum trim ring with optional grille
• CEA-2031 Compliant
  
• Size: 15"
• Nominal Impedance: Dual 2-Ohm
• Power Handling (Watts RMS): 400 Watts RMS ; 800 Watts Max
• Voice Coil Diameter: 2.25" (57.15 mm)
• Magnet Weight (oz): 72.8 oz. (2.06 kg.)
• Speaker Connector: Dual 10 AWG compression
• Fs (Hz): 20
• Re (Ohms): 3.30
• Le (mH): 3.4
• Qms: 6.40
• Qes: 0.69
• Qts: 0.62
• Vas (Liters): 219.6
• Sd (cm2): 894
• SPL (dB @ 1w/1m): 86
• Xmax (mm): 13.3
• Woofer Displacement: 0.134 cu. ft. (3.8 Liters)
• Cutout Diameter: 13.9 in. (353 mm)
• Mounting Depth: 7.34 in. (186.5 mm)
• Shipping Weight: 17.9 Lbs. (8.11 kg)
• Recommended Enclosure Type: Ported / Vented or Sealed
  
• Minimum Sealed Box Volume: 1.30 cubic feet
  
• Optimum Sealed Box Volume: 1.58 cubic feet
  
• Maximum Sealed Box Volume: 3.50 cubic feet
  
• Optimum Ported Box Volume: 2.66 cubic feet
  
• Shallow Mount Installation: No

---

Features of R750-1D:

• Variable crossover 12dB/octave slopes
• 4 Gauge power/ground terminals
• Cast aluminum heatsink
• Infrasonic filter
• RCA pass-thru
• Top mounted controls
• Tri-stage protection covers thermal, over-current and short circuits
• On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
• CEA-2006 Compliant

Specifications:

• Number of Channels: 1
• RMS Power Handling:
• 400 Watts x 1 @ 4-Ohms
• 600 Watts x 1 @ 2-Ohms
• 750 Watts x 1 @ 1-Ohm
• Total Power (Sum of RMS Power): 750 Watts
• Low-Pass Crossover Controls: Variable 50Hz - 500Hz @ 12dB/Octave
• Tone Controls: 0dB to +12dB @ 45Hz
• Low Level Signal Input: 1 RCA Pair
• Signal Output: 1 RCA Pair
• Power Input Connector: Block
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Block
• Speaker Wire Gauge: 12 AWG
• Remote Controls: Variable 0dB to +12dB @ 45Hz
• Visual Indicators:
• Power
• Protect
• Circuit Topology Class: Class-D
• Dimensions (H x W x L): 2" x 6.7" x 9.1"

---

Video of RWK41:

Unboxing Video for RWK41:

Authorized Rockville Dealer!

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets