Package Includes:

• (2) NYC Acoustics NC12S4 12" Car Audio Subwoofer with LED Sub Grille
• (1) Rockville RDV12 Dual 12" Vented Subwoofer Enclosure Box 1.55 CU FT  3/4" MDF
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

Authorized NYC Acoustics Dealer!

Video of NC12S4:

Description for NYC Acoustics Sub:

The NC12S4 is one of the coolest subs on the market. It has a really cool LED that has 2 modes: a sound activated mode that goes to the beat of the music, and a constant mode.

The grille is awesome, but the sub is what is important! This sub is a rock solid performing sub. It is powerful with 400 watts RMS power handling! It is enough power to make houses a block away from you shake as long as you are using a good amp to power it. This sub has a 40 oz magnet, thick rubber surrounds to eliminate distortion, and 2” voice coils wound with 100 % copper wire!

The sound quality is incredible on these! They have a frequency range that is better than almost any sub on the market! This sub plays the low frequency deep bass notes loud and clear! What makes it even more unique is that it is capable of playing frequencies up to 1.2KHZ depending on how you set your crossover.

Features:

• NYC Acoustics NC12S4 12" Car Subwoofer with LED grille
  
• Power Handling: 1600 Watts Peak
  
• Power Handling: 400 Watts RMS
  
• LED grille has 2 settings that can either go to the beat of the music or stay a solid color
  
• LED gets wired to the power terminal of your amplifier, which means there is no additional wired you need to run
  
• LED is multi colored (RGB)
  
• LED On/Off switch
  
• IMPP Cone
  
• Thick Rubber Surrounds
  
• IMPP Dustcap
  
• Two Gold-Plated Push Terminals
  
• Steel Basket
  
• 2" Voice Coils
  
• 4 Ohm Voice Coils
  
• 40 Oz Magnet
  
• 6mm T-Yoke + 6mm Washer
  
• 4-Layer Aluminum Voice Coils with 100% Copper Winding  
  
• Spider is made of a special polyester and cotton blend
  
• Ultra Saturated, High BL Magnetic Motor Gap
  
• Cutout Diameter: 11.06” inches
  
• Mounting Depth: 5.5” inches
  
• Frequency Response: 29HZ-1.2K HZ
  
• Sensitivity: 86.5dB
  
• Sealed Enclosure Volume: 1.0 – 1.75 Cubic Feet (1.09 Cubic Feet Optimal)
  
• Vented/Ported Enclosure Volume: 1.3 – 2.0 Cubic Feet (1.5 Cubic Feet Optimal)
  
• Weight: 8.95LBS
  
• TS Parameters:
  
• Le: 1.36 mH
  
• Fs: 29 Hz
  
• Re: 4 ohms
  
• X-max 0.24”
  
• Qts: 0.717        
  
• Qms: 4.149                        
  
• Qes: 0.867                       
  
• Vas: 3.16cf
  
• Mms: 139g.
  
• BL: 10.1 T-m
  
• Detailed Info:
  
• Frame thickness: 1.0 mm
  
• Finish: Black
  
• Body: IMPP
  
• Surround: Extra Thick Rubber
  
• Gap Plate Inside Diameter: 55.5mm (2.18 inch)
  
• Gap Plate Outside Diameter: 145mm (5.69 inches)
  
• Gap Plate Thickness: 6mm (0.236 inches)
  
• Yoke Outside Diameter: 145mm (5.69 inch)
  
• Yoke Thickness: 6mm (0.236 inches)
  
• Yoke Pole Diameter: 50mm (1.968 inches)

• Best prices - We sell all NYC Acoustics Products at great prices
  
• Full Factory Warranty
  
• Lifetime Customer Service by NYC Acoustics product experts
  
• Guaranteed legitimate and authentic merchandise
  

Please note : If you purchase NYC Acoustics from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, or even working.

The RDV12 dual vented speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more! 

This model is upgraded with a full 1 inch thickness on the face where the subwoofer is mounted. This makes this one of the strongest enclosures in the industry.

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RDV12 Dual 12" Vented Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• 1" MDF front face plate makes your subwoofer sound even better!
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Vented
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 17.75" L x 30.25" W x 13.75 H"
• Top and Bottom Depth: 17.75"
• Mounting Depth: up to 16" (enough depth for any sub on the market)
• Tuning Frequency: 39 Hz
• Port Dimensions: 2.5" x 13" x 12"
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.1 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood and port): 1.55 Cubic Feet

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.