- (2) Mackie MR824 8” 170 Watt Powered Active Studio Monitors Class A/B Bi-Amped Speaker
- (1) Mackie MRS10 10” 120 Watt Powered Active Studio Subwoofer Sub + Footswitch
- (1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam
- (1) Pair of Rockville RRS263M Foam Studio Monitor Isolation Pads 10.35" x 13"/3 Angles
- (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height
Authorized Mackie Dealer!
Description of MR824:
MR824 8” Powered Studio Monitors offer professional performance, clarity and superior mix translation so you can listen with confidence knowing your mix will sound great anywhere. Drawing from Mackie’s extensive studio monitor design experience, MR824 monitors are precision tuned to stay true to your mix whether it’s dialogue, hip hop, rock and beyond. Our proven logarithmic waveguide provides an ultra-wide listening sweet spot and enhanced stereo imaging while the Acoustic Space controls allow you to adjust the frequency response of the monitor to match your studio. The studio monitor inspired by you – MR824 Powered Studio Monitors.
Features:
- Designed for superior mix translation and accuracy for professional results in any studio
- Equipped with Mackie’s proven logarithmic waveguide design
- Ultra-wide dispersion for enhanced stereo imaging and listening sweet spot
- Precise acoustic alignment offers incredibly balanced sound across the entire frequency spectrum
- 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity
- 8” polypropylene woofer delivers responsive, dynamic low frequency response
- 85 watts of bi-amplified Class A/B amplification
- Frequency response: 35 Hz – 20 kHz
- Optimize MR monitors for your mixing environment
- Adjustable acoustic space filters maintain flat response in typical placement configurations
- HF filter applies boost or cut to compensate for particularly dull or bright sounding rooms
- Professional all-wood cabinet design built to last and look great in any studio
- Custom designed internal bracing adds stiffness for reduced distortion and enhanced low frequency response
- Flexible inputs for simple connection to almost any audio source
- Acoustically optimized with sound-tightening acoustic absorption material
- Add the companion MRS10 studio subwoofer for powerful, deep low frequency extension perfect for electronic music, hip-hop and more
All about Your RCM03:
Description:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over $150. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
- RCM03 Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
- 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
- Metal Shock Mount
- Metal Anti-wind Foam Cap
- Owners Manual
- Warranty Card
Features:
- Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -27dB±2dB (0dB=1V/Pa at1kHZ)
- Output Impedance: 200O±30% (at 1kHz)
- Standard Operating Voltage: 3V
- Operating Voltage Range: 1.5V-10V
- Current Consumption: Less than 500uA
- Voltage Deduction Characteristic: within 3dB at 2V
- S/N Ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter Cutoff Frequency: 40Hz---16 KHz
- Load Impedance: Greater or = to 1000 Ohms
- Equivalent Noise Level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB (THD=1.0% at 1kHZ)
- Electrical Current: Greater than 4.8Ma
- Microphone Body Net Weight: 320 Grams (0.7 Pounds)
- Microphone Max.diameter: 44mm (1.73" inches)
- Microphone Length: 217mm (8.54" inches)
- Microphone Material: Steel grille + Alluminum (handheld part)
- PCB Layout: Surface mount
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.Designed to add the perfect amount of dynamic, accurate low-end, the MRS10 10” subwoofer will enhance the listening experience in your studio without artificially adding boomy bass to your mix. Optimizing features include an adjustable crossover to dial in the right amount of low end for your studio plus a polarity switch to make sure your mix is always in phase. With foot-switchable bypass functionality, MRS10 can be muted while returning your monitors to full range at the push of a button. When your mix has some serious low end that needs to be heard, look no further than the MRS10.
Features:
- Mackie MRS10 10” 120 Watt Powered Active Studio Subwoofer Sub + Footswitch
- Powerful, deep extended low end for your studio, perfect for electronic music, hip-hop and more
- Designed for responsive and accurate low frequency reproduction
- 120 watts of Class A/B amplification
- 10? glass aramid composite woofer
- Shelf-ported for satisfying, deep low end
- Stereo XLR and TRS connection offer input flexibility
- Stereo XLR and TRS outputs for connection to mains
- Adjustable 40Hz to 180Hz crossover point
- Polarity switch (0 degrees / 180 degrees)
- Included footswitch bypasses the subwoofer and returns the connected monitors to full range
- Professional all-wood cabinet design built to last and look great in any studio
- Vibration-absorbing rubber feet minimize undesirable resonances
- Allows your mains to focus on highs/mids for optimum studio performance
How to set up your RRS263M:
Video of RRS263M:
Description:
The Rockville RRS263M is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 10.5" by 13" and includes 2 pads which will accommodate (2) monitors.
Isolate your speakers!
Rockville
isolation pads are designed to acoustically isolate your studio
monitors. They were designed to work in studios and give studio quality
sound; however some customers will also use them for high end home
theater setups. Typically when speakers are placed on hard surfaces,
they can vibrate. The vibrations cause the speakers’ sound to become
inaccurate, unfocused and lose their “musical transparency." The
Rockville Isolation Pad package includes a pair of high-density acoustic
foam pads with multiple angle inserts that allow you to fine-tune your
speakers positioning. Though conceived and designed for studio
monitors/speakers you can decouple and isolate any sensitive studio
device such as DVD players, turntables and laptops.
How to get maximum performance from your Monitors!
Rockville
Studio Isolation Pads are the most cost-effective improvement you make
to your sound system. Imagine the isolation pads as being your speaker
systems “shock absorbers”. Place the Rockville Isolation Pads under
your monitors they will absorb vibrations and decouple your monitor to
stop vibrations that would otherwise transfer into your studio
environment. Isolation Pads will make a day and night difference in the
sound quality of your studio. You spent good money on your studio
monitors, now go the extra mile to make them sound their best.
Rockville Studio Isolation Pads Feature:
- Easiest and affordable way to improve your studio monitors sound
- Decouples your studio monitors from desktops and monitor stands for accurate reproduction
- Each package contains 2 Isolation Pads - enough for 2 studio monitors
- 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
- Supports up to 100 lbs., so they can isolate a variety of studio gear
- Handsome charcoal gray color
Decouple your monitors for super-accurate sound
What
Rockville Isolation Pads do is called "decoupling." When your monitors
sit on your desk or floor, they transmit vibrations that cause the
surface that they're sitting on to vibrate at low bass frequencies.
These bass vibrations don’t get recorded in to your mix because they are
not really in your mix. But when you play the mix in your studio the
“coupled” vibrations, will be heard giving you false sound reproduction.
But because these “coupled” vibrations are not being recorded when you
play your mix outside of your studio, all those low bass frequencies
will be gone. By “decoupling: your monitors, you eliminate these false
low frequency vibrations, helping you to create accurate mixes that will
sound great on any playback system.
Perfectly position your monitors
Rockville
Isolation Pads allow you to position your studio monitors at the exact
angle you need. Each pad comes in two pieces, each with a 4 degree
angle. That allows you to tilt your monitor at one of five different
angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place
your monitors flat on your desk top or angled down for proper
positioning.
The most affordable way to improve the sound of your studio monitors
Features:
- Rockville RRS263M Monitor Isolation Pads
- 10.5" x 13"
- 3 Adjustable Angles
- High quality, High Density Foam
- Eliminates vibrations and unwanted noises in your studio
- Price is for (2) pads which accommodates (2) speakers
How to Set Up your RVSM1:
Video of RVSM1:
Includes:
- (2) Near-Field Monitor Stands
Features:
- Studio Monitor Stands (Pair)
- Adjustable Height
- Steel Construction
- Nylon clutch for adjusting
- EVA Pad on top to eliminate unwanted vibrations
- Triple enforced steel base with ultimate sturdiness
- Black Color
- Weight capacity: 80 lbs.
- Adjustable height Range: 33-45 inches
- Base: 17.7 x 17.7 x 17.7 inches
- Top Plate: 9.05 x 9.45 inches
- Tube Diameter: 1.5 inch- 1.37 inch
The Rockville Difference: Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.Great features and great quality make Rockville a great choice.
How to Set Up Your RockShield 3:
Includes:
- 5 Panel Mic Isolation Shield
- Hardware to Mount unit to your mic stand
- 5/8” Mic Adapter
- Desktop mic attachment
RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.
Features:
- RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
- Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
- Isolates Directional Microphones from Off Axis Coloration
- Limits External Bleed from Unintended Sound Sources
- Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
- Can be used in fixed location
- Stand mountable
- Provides Vocal Booth Style Recordings with Minimal Footprint
- Professional Studio-Grade
- Rugged Finish Makes This Easy to Transport
- Tri-Pod Foot Design for Stability on Flat Surfaces
- 3/8 Die-Cast Metal Threads
- Mic Stand with 5/8 Adapter
- The shield is made of pure high-grade steel
- Number of Panels: 5 pcs
- Dimensions Each Panel: 6.3'' x 12.2'' inch
- Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch
- UPC:
- 613815917199
