- (2) Polk Audio MM842DVC 8” 1800 Watt Dual 4-Ohm Car/Marine Boat Audio Subwoofers
- (1) Rockville KRYPTON-M1 2000w Peak/500w RMS Mono 1 Ohm Car Amplifier Amp+Remote
Authorized Polk Dealer!
Description of MM842DVC:
The Premium Upgrade
Tuned for the total sonic accuracy you get in a studio subwoofer, the
MM1 Series reconfigures this kind of high-quality deep bass impact for
an on-the-go listening experience that totally outperforms your OEM
factory setup.
Advanced High-Performance Bass
Every element of the MM1 Series is meticulously engineered for
thunderous bass, enhanced sonic detail and ultra-durable
construction—Dynamic Balance technology, a high excursion bump stack
motor structure, glass fiber formers, multilayered and oversized voice
coils, high-temp Conex spiders, a vented pole and basket structure, and
integrated fuses.
Ultra-Marine Certified
Featuring an IP56 rating that includes a non-corrosive fiberglass
reinforced ABS basket, a water-proof surround, weep holes for proper
drainage and a polypropylene cone, you get extra, long-lasting
protection—that’s all salt-fog and UV tested.
Dynamic Balance Technology
Patented process that guides material selection through rigorous testing
that identifies and cancels out unwanted resonant frequencies.
Included:
- One 8" 4 ohm subwoofer
- Stainless steel mounting hardware
Features:
- Polk Audio MM842DVC 8” 900 Watt Dual 4-Ohm Car/Marine Boat Audio Subwoofer Sub
- Driver Compliment: 8" (203.2 mm)
- Cutout Dimensions: 7.2" (185mm)
- Mounting Height: 0.55" (14.06mm)
- Mounting Depth (Top): 4" (105mm)
- Mounting Depth (Bottom): 4.68" (119mm)
- Peak Power Handling: 900 Watts
- RMS Continuous Power Handling: 300 Watts
- Nominal Impedance: 4 Ohms
- Frequency Response: 30Hz-200kHz
- Sensitivity: 85 dB
- Magnet Weight: 40.5 oz
- Magnet Material: Ceramic
- Magnet Size: 120mm x 50mm x 25mm
- VC Diameter: 1.5"
- Enclosure Volumes:
- Minimum Sealed: 0.5 cu. ft.
- Maximum Sealed: 1.2 cu. ft.
- Minimum Vented: 0.66 cu. ft.
- Maximum Vented: 1.2 cu. ft.
Krypton Series (Product Video):
What's in the Box:
- Amplifier
- Bass Remote with clipping indicator
- Birth sheet with tested power
- Owner’s manual
- Mounting Screws
- Warranty
Description:
The Krypton series of amplifiers by Rockville are engineered to be reliable and are packed with features. Whether you are a car audio competitor or just like to enjoy loud music we engineered and designed these amps from the ground up to give you great sound quality. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.
Our favorite feature of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).
We guarantee that this series of amplifiers will not only meet their Dyno Certified power but exceed their rated power.
Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ's are created equal. Some bass EQ's will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give as much clean power to your subs as possible. Our voltage display allows you to make sure you are getting the proper voltage to your amp and our clip indicator on the remote will make sure you always send clean power to your subs. In addition we also guarantee the amplifier will output over the Dyno Certified so you can confidently match our amplifier with high-end subs and know what to expect!
What about sound quality and efficiency ??
This amplifier is engineered so well that it has an extremely low signal to noise ratio which means the sound will be super clean even at high volume levels. It also has a great efficiency rating so you don't have to draw too much power from your battery. We engineered this to have a high common mode rejection rating (CMRR). This means that the amp has the capability to block out engine noise signals. By rejecting unwanted noise the end result is the cleanest sound quality.
Once again, Rockville has stepped up its game with the all new Krypton series. Their is no other amp like it on the market. The all new Phenom V2 series is in our opinion the best series of amps for the price. Between the true power, the build quality, and the features, we are confident you will agree.
Features:
- Rockville KRYPTON-M1 2000w Peak/500w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 1 Ohm:500 Watts x 1 Channel <1% THD+N (71% efficient)
- 2 Ohm: 350 Watts x 1 Channel <1% THD+N (81.8% efficient)
- 4 Ohm: 200 Watts x 1 Channel <1% THD+N (85.7% efficient)
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 1 Ohm: 2000 Watts x 1 Channel
- 2 Ohm: 1400 Watts x 1 Channel
- 4 Ohm: 800 Watts x 1 Channel
- Digital Voltage Display on Amp (Accurate within 0.15V)
- Power/Protect/Clip LED Indicators on the front panel
- Power/Protect/Clip LED Indicators on Remote control
- Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: 50Hz - 250Hz
- Subsonic Filter: 15Hz - 55Hz
- Fully Adjustable 12dB Bass Equalizer
- Remote Dashboard Subwoofer Control with Clipping Indicator
- 8 Volt Preamp Circuitry
- Phase Control Switch
- High-Speed MOSFET Power Supply
- Optical Coupler Class “D” Technology
- Full IC-Controlled Protection Circuitry
- Mute and Delay Soft Start System
- RCA Preamp Line Output
- Status Mode LED Indicator
- Minimum THD at Rated Power: <0.1%
- S / N Ratio: >90dB
- Frequency Response: 15Hz - 250Hz
- Damping Factor: >150 @ 100Hz
- 1x 60A Maxi Fuse
- Passes the Signal Burst Test (Instant signal for full power “SPL Contest”)
- Rockville engineered with a super low signal to noise ratio to give you clean sound
- Improved Bass EQ filter works well to boost the proper frequencies
- Dimensions: (W x H x L) 12.2? x 8.66? x 2.2?
- UPC:
- 613815916475
