- (2) Pairs of Polk Audio MM572 5x7” 1200 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
- (1) Rockville RXA-F1 1600 Watt Peak/400w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp
- (1) Rockville RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's
- (1) Rockville Rockmat RM12-B 12 Sq Ft Sound Dampening/Deadening Butyl Rubber Car Kit
Authorized Polk Dealer!
Description of MM572:
The Premium Upgrade
Tuned
for the total sonic accuracy you get in a studio monitor speaker, the
MM1 Series reconfigures this high-quality sound for an on-the-go
experience that’s way beyond anything you’ll hear in an OEM factory
setup.
Engineered for High-Performance Sound
Every
element of the MM Series is meticulously engineered for
high-performance sound—Dynamic Balance technology, pivoting 1” terylene
tweeter, lightweight neodymium motor structure, high-temp Conex spiders
and oversized voice coils for increased
power handling.
Ultra-Marine Certified
Featuring
an IP56 rating that includes a non-corrosive fiberglass reinforced ABS
basket, epoxy coated crossovers, water-proof inner and outer surrounds,
weep holes for proper drainage and titanium-plated cones, you get extra,
long-lasting protection— that’s all salt-fog and UV tested.
Dynamic Balance Technology
Patented
process that guides material selection through rigorous testing that
identifies and cancels out unwanted resonant frequencies.
Included:
- Two 5x7" coaxial speakers
- Mounting hardware
- Wiring harness
Features:
- (2) Polk Audio MM572 5x7” 600 Watt Car Audio Marine/ATV/Motorcycle/Boat Speakers
- Driver Compliment: 5" x 7" (127mm x 177.8mm)
- Tweeter Compliment: 1" (25mm)
- Cutout Dimensions: 4.92" x 7.15" (125mm x 181.6mm)
- Mounting Height: 0.25" (6.35mm)
- Mounting Depth (Top): 2.56" (65mm)
- Mounting Depth (Bottom): 2.82" (71.5mm)
- Peak Power Handling: 300 Watts per speaker
- Continuous Power Handling: 100 Watts per speaker
- Nominal Impedance: 4 Ohms
- Frequency Response: 35Hz-40kHz
- Sensitivity: 93 dB
- Magnet Weight: 1.38/0.23 oz
- Magnet Material: Neodymium
- Magnet Size: 29.5mm x 5mm x 12/24mm x 5mm x 3mm
- VC Diameter: 1.2"
Video of RM12-B:
Description of RM12-B:
Includes:
- 4 Sheets of Rockmat Sound Dampening Material (3 square feet per sheet)
- Roller for a perfect installation
The Rockville Rockmat RM12-B sound dampening material is a must have for any professional car audio install. This package includes 4 sheets that are each 3 square feet. This gives you a total of 12 square feet. This is perfect to be used as a door kit to cover all 4 of your doors. We also include everything needed for a quick and easy installation! Our Rockmat will increase how loud your car stereo plays! It also improves bass quality and eliminates those bad rattling and distortion sounds.
Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.
Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. The other products on the market like most of the GTMAT series for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of 100% butyl rubber and an aluminum heat resistant shield which is the same as many of the more expensive brands out there that sell for twice our price.. We only make top quality gear over here at Rockville! These are comparable to the ONYX series by GTMat. (Only we sell it for the price of their lower series!).
Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.
Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!
To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!
Features:
- Rockville Rockmat RM12-B 12 Sq Ft Sound Dampening/Deadening Butyl Rubber Car Kit
- Contains 4 sheets of sound damping material – Each sheet is 12" inch x 36" inch (3 sq. ft. per sheet)
- Paintable Surface
- Recommended for use as a door kit or trunk lid kit
- Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by
- Eliminates sound leakage!
- Improves Bass Quality and Reduces Bass Distortion
- Kill unwanted noise, rattles, vibrations
- Reduce exhaust and engine noise
- Aluminum-coated for heat-resistance
- 72mil thickness
- Full car installation reduces unwanted noises 5-8 dB
- We use the highest quality high-tack self-adhesive to make your installation quick and easy!
- Our model has new and improved increased flexibility for an easier installation and top sound quality!
- Permanent installation with ability to withstand even the highest temperatures!
- Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
- Sticks to any surface
- Designed and engineered by Rockville USA!
- Manufactured with the newest state-of-the-art machinery using only the purest raw materials as well!
- Every product is checked during production for consistency. We have very high quality standards!
- We use very high quality butyl rubber which gives amazing sound insulation and shock absorption. We do not use any asphalt in our product!
Specifications:
- Dimensions per sheet: 12" inch Length x 36" inch Width x 0.07' sheet Depth
- Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum
- High-Tack Self-adhesive
- Reduces unwanted noises 5-8 dB
- Adhesive temperature range of -100F to 300F (-60C to 150C).
- Material Color: Black
- Weight: 8.55 (Lbs.) per box
- Shipping weight: 9.48 LBS
- Shipping Dimensions: 16.34" x 14.57" x 2.36"
Features of roller:
- Made of high quality Wood & Steel
- Designed especially for use in installing sound dampening material
- Length: 7 in
- Handle Length: 5 in
- Roller Diameter: 1.3 in
- Material Color: Black
- Weight: 0.44 Lbs.
Video of RWK42:
Video for Unboxing RWK42:
Description:
The Rockville RWK42 4 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 80 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (2) sets of RCA cables.
Features:
- Rockville RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit
- (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable
- 17 4 Gauge Translucent Blue SuperFlex Power Cables
- 17 18 Gauge Blue Remote Cable
- 17 16 Gauge Clear Speaker Wire
- 3 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 80 Amp AGU Gold Plated Fuse
- 7 Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Soft abrasion proof insulating jacket allows for 100% improved flexibility
- PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Great features and great quality make Rockville a great choice.
All about your rxa-f1, RXA-T1: Description of RXA-F1: Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
The RXA-F1 is a 4 channel high power amplifier with 1600w peak. 380 Watts (4 x 95 Watts @ 2 ohms). You can also bridge the amplifier and get 2 x 200 Watts bridged @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXA-F1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.
One last point I want to make about this amplifier is efficiency. The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.
We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).
Features: About Rockville Quality Control Procedures: The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.
- UPC:
- 613815936466
