Package Includes:
- (2) Memphis Audio MJP1544 15" 1500 Watt MOJO Pro Car Audio Subwoofer DVC 4 ohm Sub
- (1) Memphis Audio MJP1500.1 1500w RMS @ 1 ohm Mono Car Amplifier Mojo Pro Amp+Remote
- (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
Features:
- Specifically designed for high SPL performance
- DVVC Direct Vent Voice Coil Cooling
- Cross drilled front plate venting
- Aluminum shorting ring for reduced inductance
- Foam surround
- Rigid paper cone
- Progressive spider
- Diecast basket
- Single Sided compression terminals
- Size: 15 Inch
- Voice coil: DUAL 4O
- RMS/PEAK: 750/1500 Watts
- SENS: 88 dB
- DEPTH: 7.88 Inch
- CUT OUT: 13.84 Inch
Thiele Small Parameters:
- Resonant Frequency (fs): 31.2 Hz
- Mechanical Q (Qms): 6.558
- Electrical Q (Qes): 0.727
- Total Q (Qts): 0.65
- Sensitivity: 88 dB
- Xmax Linear: 0.51 in
- Displacement: 0.29 cf
- Air Volume of Suspension (Vas): 2.93 cf
- Moving Mass (Mms): 305.92 g
- Suspension Compliance (Cms): 0.085 mmN
- Effective Piston area (Sd): 829.58 SqCm
- Motor Strength (Bl): 12 TM
- DC Resistance: 1.75 Ohms
Voice Coil & Magnet:
- Impedance Series: 8 ohms
- Impedance Parallel: 2 ohms
- Voice Coil Diameter: 2.5 in
- RMS Power: 750 watts
- Peak Power: 1500 watts
- Magnet Weight: 120 oz
- Magnet Diameter: 6.69 in
Physical Dimensions:
- Mounting Depth: 7.88 in
- Cutout Diameter: 13.84 in
- Frame Outside Diameter: 15.9 in
Enclosure Recommendations:
- Single Sub Sealed: 2.6 cf
- Dual Subs Sealed: 5 cf
- Single Sub Vented: 4.4 cf
- Port Dimensions: 7" x 6" x 28"L in
- Tuning Frequency: 34 Hz
- Dual Sub Vented: 8.5 cf
- Port Dimensions: 9" x 9" x 22"L in
- Tuning Frequency: 34
Description:
MOJO Pro amplifiers pro audio style amplifiers designed to push massive power to drive any pro audio system to the extreme limits of sound. All MOJO Pro amplifiers are designed with an extruded aluminum chassis with exposed aluminum accents and a vibrant orange accent strip which is befitting of anything bearing the MOJO name. The mono amplifiers are strapable allowing users to combine amplifiers for an experience unlike anything else offered by Memphis.
Features:
- Extruded aluminum Heatsink
- 12dB/octave butterworth crossovers
- Variable crossovers
- 3 EQ boost settings - 0,6,12dB (MJP800.4)
- Variable EQ bass boost (mono block amps)
- Strap-able (mono block amps)
- Bass knob included (mono block amps)
MONO Amplifiers
- 1-CH 1 x 1500W @ 1O
Specification:
- RMS POWER 4O: 675 X 1
- RMS POWER 2O: 1050 X 1
- RMS POWER 1O: 1500 X 1
- BRIDGE/MONO POWER 4O: -
- THD%: <1%
- SIGNAL/NOISE RATIO: >80Db
- FREQ RESP: 11Hz - 200Hz
- DIMENSIONS: 7.5 x 2 x 11
- INPUT RANGE: 200mV - 6v Low, 3v - 20v High
- AMP KIT: 0GKIT
Videos of RWK0CU:
Description:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more copper than 100 %. So the only way a cable would out-perform this one is if it were being advertised as a 0 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.
Maximum Power!
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 0 gauge cable? Then look no further than the Rockville True-Spec RWK0-CU 0 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency.
The power and ground cables aptly named "Mega Power Cable" are a no compromise power cable. Rockville's engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces "surface skin impedance loss" so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a "heavy-duty" cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won't discolor over time.
The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 250-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 12 gauge speaker cable included in the 0 gauge kit can handle over 3000 watts of power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.
Amplifier Kit Key Features:
- 0 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 3000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 4704
- BC-5W2 Compliant
Kit includes:
- 17 ft. Frosted Blue 0 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 0 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 12 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One ANL Fuse Holder with 250 amp ANL fuse
- One 1/2" black rubber firewall grommet
- Two 0 gauge spade terminals
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 0 gauge ring terminal
- Ten 6" black zip ties
