Package Includes:
- (2) Memphis Audio MOJO MJM612 6.5" 1400w Competition Car Subwoofer Sub 1 or 2 ohm
- (1) Rockville Krypton M4 6000w Peak/1500w RMS Mono 1 Ohm Car Amplifier Amp+Remote
- (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
- (1) Rockville RD65 Dual Sealed 6.5" MDF Subwoofer Box Enclosure 0.60 cu ft. Per Sub
- (1) Dual Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spade Terminals
Description:
MOJO mini subwoofers received a huge upgrade for 2023 with the addition of Memphis FLEXTM technology allowing you to select between an impedance of 1O or 2O adding even more versatility to this compact powerful subwoofer. MOJO mini's still pack the same intense punch in both 6.5" and 8" versions and are a perfect addition for anyone looking to add huge MOJO bass with a smaller footprint.
Features:
- 1O or 2O FLEXTM selectable impedance
- CCAW triple voice coil (2" on MJM812 & 1.5" on MJM612)
- Vented cast aluminum basket
- Double stitched V-Groove rubber surround
- DVVC Direct Vent Voice Coil Cooling
- Light weight ultra-rigid glass fiber dustcap
- Reinforced spider
- Folded V-Groove surround increases excursion without sacrificing effective surface area
MOJO Mini Subwoofers W/ Flex
- 6.5" FLEXTM 1O or 2O 700/1400W
Specifications:
- Size (in): 6.5"
- RMS Power (w): 700
- Peak Power (w): 1400
- Sensitivity (dB): 82
- Magnet Size (Oz): 80
- Mounting Depth (in): 5
- Cut Out Diameter (in): 5.95
- Voice Coil Diameter (in): 1.5
- Warranty: 1
TS Parameters:
THIELE SMALL PARAMETERS | |
Resonant Frequency (fs) | 48.7 Hz |
Mechanical Q | 6.06 Qms |
Electrical Q | 0.585 Qes |
Total Q | 0.534 Qts |
Sensitivity | 80.63 dB |
Xmax Linear | 0.31 in. |
Displacement | 0.02 cf. |
Air volume of suspension (Vas) | 0.13 cf. |
Moving Mass (Mms) | 79.37 g |
Suspension Compliance (Cms) | 0.135 mmN |
Effective piston area (Sd) | 138.93 SqCm |
Motor Strength (Bl) | 6.5 TM |
VOICE COIL & MAGNET | |
Impedance Series | 4 ohms |
Impedance parallel | 1 ohms |
All About Your Krypton Series:
How To Install A Car Amplifier:
How To Set the Gain On Your Car Subwoofer Amplifier:
How To Improve your Car Audio Electrical System:
What's in the Box:
- Amplifier
- 150A External fuse
- Bass Remote with clipping indicator
- Birth sheet with tested power
- Owner's manual
- Mounting Screws
- Warranty
Description:
The Krypton series of amplifiers by Rockville are engineered to have the best reliability and features. Whether you are a car audio competitor or just like to enjoy loud music. We engineered and designed these amps from the ground up to give you great sound quality and great features. You will notice the cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.
Our favorite feature we introduced of the Krypton series is the bass remote that has a clipping indicator. This allows you to set the amp to max output before clipping on any song. This will protect your subs while you maximize SPL. What is nice about this is that you can set the gain level to max before clipping on any given song in real time! If you use a DD-1 or another tool, you are setting the gain on one song but the next song might have more headroom or might clip depending on the levels it was recorded at (this is referred to as crest factor in the engineering world).
We guarantee that this series of amplifiers will not only meet their Dyno Certified power but exceed their rated power.
Another feature we love about this is the bass equalizer. Most amps have this feature however not all bass EQ are created equal. Some bass EQ's will just clip your subs to death. Our bass EQ circuitry will boost the proper frequencies in a way that sounds good and is safe for your subs. In addition you can always use the clip indicator on the bass remote to make sure you are not sending a clipped signal to your subs. Our amplifier is meant to give you as much clean power to your subs as possible. Our voltage display allows you to make sure you are getting the proper voltage to your amp and our clip indicator on the remote will make sure you always send clean power to your subs. In addition we also guarantee the amplifier will be giving over the rated Dyno Certified so you can confidently match our amplifier with high-end subs and know what to expect!
What about sound quality and efficiency though ??
Well glad you asked. This amplifier is engineered so well that it has an extremely low signal to noise ratio which just means the sound will be super clean even at high volume levels. It also has a good efficiency rating so you don't have to draw too much power from your battery. One other thing that is important is that we engineered this to have a high common mode rejection rating (CMRR). This means that the amp has the capability to block out engine noise signals. By rejecting unwanted noises the end result is the cleanest sound quality.
Once again, Rockville has stepped up its game with the all new Krypton series. Their is no other amp like it on the market. In our opinion this is the best budget series of amps in the world. We actually enjoy this amp more then others that cost over 2 times the price.
Features:
- Rockville Krypton M4 6000 Watt Peak / 1500w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 1 Ohm: 1500 Watts x 1 Channel <1% THD+N (76% efficient)
- 2 Ohm: 1000 Watts x 1 Channel <1% THD+N (86% efficient)
- 4 Ohm: 550 Watts x 1 Channel <1% THD+N (89% efficient)
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 1 Ohm: 6000 Watts x 1 Channel
- 2 Ohm: 4000 Watts x 1 Channel
- 4 Ohm: 2200 Watts x 1 Channel
- Digital Voltage Display on Amp (Accurate within 0.15V)
- Power/Protect/Clip LED Indicators on the front panel
- Power/Protect/Clip LED Indicators on Remote control
- Clip indicator on the bass remote allows you to quickly set any song to right before clipping in real time
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: 50Hz - 250Hz
- Subsonic Filter: 15Hz - 55Hz
- Fully Adjustable 12dB Bass Equalizer
- Remote Dashboard Subwoofer Control
- 8 Volt Preamp Circuitry
- Phase Control Switch
- High-Speed MOSFET Power Supply
- Optical Coupler Class "D" Technology
- Full IC-Controlled Protection Circuitry
- Mute and Delay Soft Start System
- RCA Preamp Line Output
- Status Mode LED Indicator
- Minimum THD at Rated Power: <0.1%
- S / N Ratio: >90dB
- Frequency Response: 15Hz - 250Hz
- Damping Factor: >150 @ 100Hz
- 150A External Fuse Included
- Passes the Signal Burst Test (Instant signal for full power "SPL Contest")
- Rockville engineered with a super low signal to noise ratio to give you clean sound
- Improved Bass EQ filter works well to boost the proper frequencies
- Dimensions: (W x H x L) 16.29" x 8.66" x 2.2"
Videos of RWK0CU:
Description:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100%
- UPC:
- 613817121723