Package Includes:
- (2) Pair Infinity KAPPA 8130M 8" 500w 3-Way Premium Marine Speakers w/ RGB Lighting
- (1) Infinity KAPPA 1010M 10" 900 Watt Marine Subwoofer w/ RGB Lighting 2 or 4 Ohm
- (1) Rockville DBM50 4000 Watt/980w RMS 5 Channel Marine/Boat Amplifier Amp+Mic
- (2) Pair Rockville MAC90W 8” White Aluminum Wakeboard Tower Speaker Pod Enclosures
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
- (2) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin
What's In The Box:
- 2 x 8" (200mm) woofers, pr.
- 2 x Flush mount adapter with Integrated grille, pr.
- 12 x Screw
- 12 x Speed clip
- 1 x Spanner
- 2 x Closed cell foam gasket
- 1 x Twin pin tool
Description:
Infinity's Kappa Marine loudspeakers leverage Infinity's world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity - ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.
Features:
Plus One™ Woofer Cones
Plus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character.
Convertible Design
To increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions.
Perimeter Illumination
Unique and eye-catching RGB illumination can display seven colors out of the box - or an almost unlimited number of colors when connected to an external lighting controller.
SSI (Switch-Selectable Impedance)
New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.)
Mylar Tweeters with Integrated Grilles
Weather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.)
One-piece Polymer basket
The polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection.
High Sensitivity
A high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character.
Voicing of Speakers
Speakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point.
Harman Standard Reliability Testing
Infinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
Infinity at an Affordable Price
This is Infinity - one of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world - obviously, this is no coincidence. If you know audio, you know Infinity in your car, your home - why not in your boat?
General Specifications:
- Power Handling: 200 watts RMS, 500 watts peak power
- Sensitivity: 92 dB at 2.83 volts
- Frequency Response: 30 - 22kHz
- Voice Coil Diameter: 1 in. (25.5 mm)
- Impedance: 3 ohm impedance
What's In The Box:
- 1 x 10" (250mm), ea., with integrated grille
- 6 x Screw
- 6 x Speed clip
- 1 x Spanner
- 1 x Closed cell foam gasket
- 1 x LED cable
- 1 x Owner's manual
- 1 x RoHS sheet
Description:
Infinity's Kappa Marine loudspeakers leverage Infinity's world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity - ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.
Features:
Plus One™ Woofer Cones
Plus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character.
Convertible Design
To increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions.
Perimeter Illumination
Unique and eye-catching RGB illumination can display seven colors out of the box - or an almost unlimited number of colors when connected to an external lighting controller.
SSI (Switch-Selectable Impedance)
New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.)
Mylar Tweeters with Integrated Grilles
Weather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.)
One-piece Polymer basket
The polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection.
High Sensitivity
A high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character.
Voicing of Speakers
Speakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point.
Harman Standard Reliability Testing
Infinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
Infinity at an Affordable Price
This is Infinity - one of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world - obviously, this is no coincidence. If you know audio, you know Infinity in your car, your home - why not in your boat?
General Specifications:
- Power Handling: 300 watts RMS, 900 watts peak power
- Sensitivity: 89 dB at 2.83 volts
- Frequency Response: 20 - 2kHz
- Voice Coil Diameter: 2 in. (49.5 mm)
- Impedance: 2 and 4-ohms, Switch Selectable Impedance (SSI™)
DBM50 Product Video:
What's In The Box:
- Amplifier
- PA Microphone
- Bass Remote
- Birth sheet with tested power
- Owner's Manual
- Mounting Screws
- Warranty
Description:
The all new dBM marine series of amplifiers gives you the best of both worlds! We took the sound of our best-selling series of dB car amps and we added top of the line marine grade parts so that they will last even under the harshest conditions on the water.
We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, internal mounting screws and hardware of the amp are made of stainless steel and are rustproof. Even after many years of use the amp will be rust free and operate like new!
The DBM50 is a 5 channel high power amplifier with 4,000 watts peak output and 980 watts Dyno Certified RMS power. Here at Rockville we offer the best value in marine audio. We therefore want to make it easy for you to compare our products to any other brand. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
This is a 5 channel amplifier that will power your entire marine system. The amplifier has 4 channels with full range signal, and a 5th mono channel dedicated to your subwoofers. Our crossover supports low pass, high pass, bandpass, and subsonic. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, and midrange speakers. What is really cool is that we allow you to set the high and low pass on the same channel so you can really fine tune your speakers.
Features:
- Rockville DBM50 4000w Peak/980w Dyno-Certified RMS 5 Channel Marine/Boat Amplifier Amp+Mic
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N
- 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2 Ohm 480 Watts x 4 + 2000 Watts x 1
- 4 Ohm: 320 Watts x 4 + 1200 Watts x 1
- Channels 1-4 are Class "AB" and Channel 5 is class "D"
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: (CH3-CH4) 40Hz - 4KHz /(CH5) 50Hz - 250Hz
- High Pass Filter: 15Hz - 4KHz
- Subsonic Filter: 15Hz - 50Hz
- Remote Dashboard Subwoofer Control
- Includes PA microphone
- Painted Conformal Coating PCB Board is protected from moisture (Uses 2577 Waterproof Glue)
- Waterproof silicone covers for end panels
- Rustproof Aluminum heat sink
- Stainless steel end panels are rustproof
- All screws and mounting hardware are stainless steel and rustproof
- Bottom panel is aluminum and rustproof
- High-Speed MOSFET Power Supply
- Rugged switching MOSFETs for Class D in CH5
- Under Voltage Protection at 10V
- Over Voltage Protection at 16V
- Full IC-Controlled Protection Circuitry
- Fully Adjustable 12dB Bass Equalizer
- Mute and Delay Soft Start System
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- Minimum THD at Rated Power: < 0.05%
- S / N Ratio: >90dB
- Frequency Response: 15-35KHz
- Damping Factor: >100@ 100Hz
- 40 Amp x 3 ATC Fuses
- Product Dimensions: (L x W x H) 18.6" × 9" × 2.4"
Video of MAC90W:
What's In The Box:
- 2 Wakeboard Cans
- All mounting hardware
- (2) 2.375" rubber inserts
- (2) 2.25" rubber inserts
- (2) 2.5" rubber inserts
- (2) 2" rubber inserts
Description:
Rockville is proud to introduce our all new line of aluminum wakeboard cans. The MAC90W comes in pairs and includes our rugged universal aluminum clamp for easy installation to any wakeboard tower pole measuring from 2" to 2.5" diameter. Six precision molded high impact rubber inserts guarantee fitment on towers from 2" to 2.5". Our clamp inserts are precision-fitted to sit perfectly inside the metal clamps. The speaker terminals are safely enclosed inside the waterproof speaker canister.
***Please note if you need an insert to accommodate a 1.75" diameter tube please let us know and we will send one out to you free of charge!***
These awesome pods are built of super strong aircraft grade 6061 aluminum. The MAC90W features a white powder-coat finish which offers unparalleled resistance to chipping, scratching, and fading. They are fully marinized which means they'll withstand the elements on the water. These cans are 100 % waterproof. What makes our technology the best on the market is that our pods are internally wired! This means the terminals are inside the pod and the wires are fed through pre-drilled holes on the pod and clamp. Simply align the wire opening with the hole on your tower and you are done! No exposed wires or terminals! Aluminum cans will last forever!
The sound quality of these are phenomenal! These are the perfect amount of air space to give you the perfect sound quality with the leading marine speakers on the market from brands like Wet sounds, Rockford Fosgate, MB Quart Pioneer and more!. Our high efficiency design means more audio output from the same speakers! This means you get louder, cleaner sound with less distortion using our wakeboard enclosures than with other brands.
Features:
- Pair Rockville MAC90W 8" White Aluminum Wakeboard Tower Speaker Enclosures
- Made of high quality 6061 aircraft grade aluminum
- Beautiful white powder-coat finish
- 100% waterproof and fully marinized against salt and fresh water conditions
- Internally wired for clean install - no exposed wires or terminals
- High efficiency design features the perfect airspace for 8" speakers
- Rugged universal mounting clamps made of 6061 aluminum
- Includes precision molded, high impact plastic inserts for tower fitment from 2" diameter to 2.5" diameter
- Mounting Depth: 7.67"
- Total Depth: 11"
- Cutout: 7.3"
- Diameter: 8.97".
- Mounting Diameter: TBD
- Height of mount: 3.75"
- Total height of unit: 12.3"
Fits Speakers Such As:
- Rockford Fosgate Punch PM282H/PM282B
- Pioneer TS-MR2040
- MB Quart NK1-120L
- Wet Sounds XS-808/SW808/Revo-8
- AND MORE!
Video of RMWK:
Features:
- Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
- 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 25' Blue Remote Wire
- (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 120A Mini-ANL Fuse
- (1) 80A Mini-ANL Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (5) Speaker Cable Terminals
- (1) Washer
- (10) White Cable Ties
Description:
Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Features:
- Rockville MRCA25 RCA Interconnect Cable
- 25' Ultra-Flexible PVC Shield
- Twisted Pair
- Premium Audiophile Marine RCA Interconnect Cable
- High Performance Water Proof RCA Plugs
- Tinned Copper Strands for Sonic Purity
- Outstanding Noise Rejection, Accuracy, and Frequency Response
- UPC:
- 613817123727
