Package Includes:

• (2) JBL JRX225 Dual 15" Professional 4000 Watt Passive DJ/PA Speakers 4 Ohm JRX 225
• (1) Crown Pro XLS1502 XLS 1502 1550w DJ/PA Power Amplifier Amp, Only 8.6 LBS + DSP!
• (2) Rockvile RCSS1610 10' 16 AWG Speakon to Speakon Speaker Cable 100% Copper
• (1) Rockville RFAAW DJ Event Facade Light Weight Metal Frame Booth+Travel Bag+Scrim

---

Features of JRX225:

• JBL JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker
• Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling.
• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
• Advanced network topology crossover design
• High-voltage capacitors and inductors with massive cores and heavy gauge wire
• Progressive Transition™ high frequency waveguide
• 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure
• SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles
• 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10°

Details:

• Power Rating : 500 W / 2000 W
• Frequency Range (-10 dB) : 42 Hz - 18 kHz
• Frequency Response (±3 dB) : 62 Hz - 13 kHz
• Sensitivity (1w/1m) : 100 dB SPL
• Nominal Impedance : 4 ohms
• Recommended Amplifier Power : 500 W to 1000 W into 4 ohms
• Maximum SPL : 133 dB
• Nominal Dispersion : 90º x 50º
• Crossover Frequency : 2.2 kHz
• Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in)
• Weight : 42.6 kg (94 lb)
• High Frequency Driver : JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition™ Waveguide
• Low Frequency Driver : JBL M115-8A x 2
• Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel
• Grille : 18-gauge, powder-coated steel

---

Features of XLS1502:

• Crown Pro XLS1502 1550 Watt DJ/PA Power Amplifier, with DSP
• RMS Power @ 2 Ohms: 775 Watts x 2 Channels
• RMS Power @ 4 Ohms: 525 Watts x 2 Channels
• RMS Power @ 8 Ohms: 300 Watts x 2 Channels
• RMS Power @ 4 Ohms Bridged: 1550 Watts x 1
• RMS Power @ 8 Ohms Bridged: 1050 Watts x 1
• Frequency Response: 0 dB, -1dB
• Sensitivity: 1.4Vrms
• Signal to Noise: > 103dB
• THD: <0.5%
• Distortion: <0.3%
• Crosstalk: At 1kHz: > 85 dB, At 20kHz: >55 dB
• Damping Factor: > 200
• Class D amp with Crown's ultra-efficient DriveCore technology weighs less than 11 lb (5 kg)
• Higher DSP Capabilities: More control; has band pass filter per channel
• Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
• Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
• Set sleep mode after specified time without having to press a button
• Security setting disables menu buttons; menu locked/unlocked by entering combination
• System reset allows factory settings to be restored
• Remote Power Trigger
• Peakx™ Limiters provide maximum output while protecting your speakers
• XLR, 1/4", RCA inputs provide flexibility
• Integrated PureBand Crossover System for better performance and control
• Efficient forced-air fans prevent excessive thermal buildup
• Product Dimensions: 19" x 3.5" 7.7" inches
• Product Weight: 8.6 Lbs.

---

Video of RCSS1610:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCSS16-10 16 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
• 100% Copper Conductors for Lower Resistance
• Black PVC Jacket for Both Durability and Flexibility
• Intended for High-Current Applications Only, Not Line-Level Signals
• Length: 10 Ft
• Gauge: 16

---

Video of Rockville DJ Facades and Accessories:

Video of RFAAW:

Each Set Includes:

• (4) Panels each 27.5” W x 47.2” H
• Stretchable White Scrim
• Carry Bag for easy Transport
• 3M Velcro

The Rockville RFAAW DJ Event Facade is the best in its class! Our Rockville employees have used all the popular Façades on the market and had so many frustrations, so we decided to make our own!

What makes ours way better:

1.    Light-weight  
Our panels are made out of pure aluminum! Other brands use steel which is not as durable and weighs a lot more. They use this material simply because it is cheaper. We had the option during product development to choose steel or aluminum. The steel would have cost $10 less actually. We went with the aluminum because it is lighter in weight and much stronger.

2.    Larger panels 
We made each of our panels 27.5” inches wide. We include 4 panels which totals 110” inches.  Our competitors panels are too small. Their panels are around 17 – 20 inches wide each panel. That adds up to only 80” inches. You would have to use a pretty small table or buy 2 facades. I am talking from personal experience.

3.    Foldable design for quick setup and break-down
Our design folds for easy setup and breakdown! Our competitors advertise that their item can fold and break down easily. I’ve used them, and you have to literally disconnect the hinges, and then next time you use them again you have to reconnect it. I do not consider it quick or easy. Ours literally just folds and you do not have to disconnect all the hinges. Our model is the only one I have seen on the market that truly folds for quick and easy transport.

4.    360 Degree panel rotation
Our panels can rotate a full 360 degrees, giving you the freedom to wrap these around a table and angle them perfectly to make your setup professional looking. One of the biggest issues that annoyed me the most about the competitor’s panels is that they have huge limitations in the angles of their panels. What was most annoying to me was that when you try to angle them how you want, they either got stuck or the hinges popped out and I had to set them up again and again. With the Rockville 360 degree rotating panels you are completely free to angle your panels easily without any limitations!

5.    Built-in scrim!
The stretch fabric panels are easily removable for cleaning. Our scrim can be washed by hand in cold water and laid down flat to dry. Our scrim is also a fire retardant. 

6.    Travel bag included
Transportation and storage is simple with the included carry bag.

7.    Non-slip rubber feet for stability
We decided to add rubber non-slip feet to our model. This adds more stability to the façade.

8.    Expandable!
We sell models RAPFAW and RAPFAB which are add on panels so you can expand your black or white facade and have an unlimited amount of panels connected together. We also sell separately models RSCFAB and RSCFAW which are black or white scrims. This way you can interchange the color of your scrim depending on the event you are using this for. Another purpose of this is if you want to have one set in the wash you can still have a backup available.

8.    Price!
I personally felt like I got ripped off when I paid over $250 for a DJ Event Façade. I did not see any reason for it to cost so much. I got even more upset when I put it together and it did not feel like $250. We decided to go to market with a product twice as good at half the price! We want the best gear to be affordable for everyone!

9.    90 Day Money Back Guarantee including return shipping!
If for any reason you are not 100% satisfied with your purchase we will send you a prepaid shipping label and refund you in full for this item. We know that this will be the best Façade you have ever purchased so it is highly unlikely you will want to return it.

Features:

• Rockville RFAAW DJ Event Facade with White Scrim and Travel Bag
• (4) Panels included – each are 27.5” W x 47.2” H
• Light Weight Aluminum Frames. The entire product weighs 7 LBS, around a third of the weight of our competitors who make their panels out of steel! Also our light-weight aluminum is much stronger than steel
• Includes travel bag for easy transport
• Includes white scrim
• Includes a carrying bag to store and keep facade scrim looking its best
• Folds for easy break down and travel – no need to disconnect the hinges!
• 360 degree rotating panels allows each panel to be positioned to your liking with no limitations
• Detachable hinges
• Includes white scrim made of a special stretch material
• Scrim is fire retardant
• Scrim is easy to wash – simply wash with cold water and lay it flat to dry
• Non-slip rubber feet for stability
• Expandable: Add additional panels sold seperately (models RAPFAW and RAPFAB)
• Additional scrims available in our store in black and white (models RSCFAB and RSCFAW)
• Product weight: 7 LBS
• Packaged shipping weight: 10 LBS