Package Includes:

• (2) JBL Pro JRX215 15" 1000 Watt Professional Passive PA/DJ Speaker 8 Ohm JRX 215
• (1) Rockville RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres
• (1) Pair Rockville Tripod DJ PA Speaker Stands + Carrying Case Black RVSS2
• (2) Rockville RCTS1610 10' 16 AWG 1/4" TS to Speakon Speaker Cable 100% Copper

---

Features:

• JRX215 15" Two-Way Sound Reinforcement Loudspeaker System
• JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil
• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
• Advanced network topology crossover design
• High-voltage capacitors and inductors with massive cores and heavy gauge wire
• Progressive Transition™ high frequency waveguide
• 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure
• SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles
• 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10°

Details:

• Power Rating : 250 W / 1000W
• Frequency Range (-10 dB) : 41 Hz - 18 kHz
• Frequency Response (±3 dB) : 59 Hz - 13 kHz
• Sensitivity (1w/1m) : 99 dB SPL
• Nominal Impedance : 8 ohms
• Recommended Amplifier Power : 250 W to 500 W into 8 ohms
• Maximum SPL: 129 dB
• Nominal Dispersion : 90º x 50º
• Crossover Frequency : 2.2 kHz
  Dimensions (H x W x D) : 699 mm x 460 mm x 432 mm (27.5 in x 18.1 in x 17 in)
• Weight : 27.4 kg (60.5 lb)
• High Frequency Driver : JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition™ Wave guide
• Low Frequency Driver : JBL M115-8A
• Input Connectors : Parallel Neutrik® Speakon® NL-4 (x1); .25in TS phone jack (x1)
• Grille : 18-gauge, powder-coated steel
• Mounting & Suspension : 36 mm, dual-angle pole-mount socket

---

All About Your RPM1470:

How To Set Up Your RPM1470:

Inputs, Outputs, and Controls Explained on Your RPM1470:

How To Connect an Instrument Or Mic to your RPM1470:

How To Set Up For Karaoke with Your RPM1470:

How To Connect a Subwoofer to Your RPM1470:

 

Video of RPM1470:

Description:

The Rockville RPM1470 is a 14-channel powered console mixer with USB input and Bluetooth. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mic preamps. We manufactured this mixer with XDR2 low noise mic preamps. These are some of the best sounding mic pre’s on the market. They compete in quality with any brand on the market! The next goal we had was versatility. This mixer has aux sends and returns on each channel so you can route your external effects easily. We also built in a 24-bit digital effects processor that sounds great. We didn’t include 99 effects which all sound the same. Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests.

We tested this and we ran the mixer to (2) Mackie C300Z speakers, and even with the volume turned up half way these were filling an extremely large room with sound! We also tested these with dual 15” DJ speakers and really cranked them and the sound of the highs and lows were crisp and clean. The great thing about this is the amp does not overheat even when cranking it for hours straight. The power amp built into this mixer is 500 x 2 RMS @ 8 ohms and 750 x 2 RMS @ 4 ohms. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings, but RMS is the true continuous output power you should look at. 

Other great features are a dual 7-band master EQ, a 4-band EQ on each channel, an EQ kill switch, and pad and solo buttons on each channel. Rounding things out, we added a USB input that has 2 functions. It can play back your audio tracks. But what is really cool, is that you can record your main mix onto the USB or onto an SD! We also added Bluetooth to this mixer to give you all the latest and greatest options.

90 Day Money Back Guarantee
The price point we are selling this at is about a third of what any other brand would charge. On top of this, we are offering a 90 day money back guarantee including return shipping. Ifyou do not love this mixer, you can send it back and get all your money back and we will even cover the cost of return shipping. Just be sure to send it back including the original packaging.

Features:

• Rockville RPM1470 14-Channel 6000 Watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power
• RMS Power Output:
  • 750 Watts x 2 @ 4 Ohm
  • 500 Watts x 2 @ 8 Ohm
• Program Power Output:
  • 1500 Watts x 2 @ 4 Ohm
  • 1000 Watts x 2 @ 8 Ohm
• Peak Power Output:
  • 3000 Watts x 2 @ 4 Ohm
  • 2000 Watts x 2 @ 8 Ohm
• 14 Channel mixer section: 12 mono channels, 1 stereo channel
• 14 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones
• XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pre’s on the market
• Built in USB allows you to play songs from your computer or a thumb drive
• Built in recording - allows you to record your main mix onto the USB or SD card
• USB supported formats are MP3, WAV, WMA
• Built in advanced bluetooth wireless audio streaming with the most reliable Bluetooth chip on the market
• 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects)
• Effects level control can adjust signal level of each effect
• Effects mute button
• FX footswitch input lets you turn your effects on or off
• 4-Band EQ (high, high-mid, low-mid, low) per channel
• Each channel is equipped with pad, must, and solo buttons with LED’s
• Each channel has gain, aux control, FX control, Pan control, Volume control
• Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping
• Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch)
• Aux send and Aux returns on every channel to connect all types of external effects and processors
• You can control your monitor mix and check levels through your headphones
• Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED’s lit up
• Power and Output level LED indicators
• Main output fader allows you to fade the sound between the left and right channel
• RCA input, RCA output, and USB player
• Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R
• Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.
• When the pad button is pressed in the gain will adjust from 240dB to 0dB
• Solo button allows you to hear the signals through your headphones or to the control room without having to route them to the main mix. This works even with the fader turned down. You can use this to preview channels before they are let into the mix or just to check out a channel during a live performance. You can solo as many channels at a time as you want
• Built in cooling fan and ventilation system
• USB input supports unlimited capacity (as many GB as you want)
• 110/220V switchable power supply
• Product Dimensions (L x W x H): 22.44” x 17.72” x 7.09” inches
• Weight: 37.48 Lbs.

---

All About Your RVSS2:

How To Set Up Your PA Speaker Stands:

Description:

This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment.

Includes:

• (2) Tripod Speaker Stands

Features:

• Adjustable Height
• Steel Construction
• Black Color
• Weight Capacity: 132 lbs
• Adjustable Height Range: 47-79 inches
• Base spread: 0-23 inches
• Tube Diameter: 1.38 inches
• Leg Diameter: 1.38 inches

---

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.

Great features and great quality make Rockville a great choice.

---

Video of RCTS1610:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCTS1610 16 AWG 1/4" TS to SpeakOn Pro Speaker Cable
• 100% Copper Conductors for Lower Resistance
• Black PVC Jacket for Both Durability and Flexibility
• Intended for High-Current Applications Only, Not Line-Level Signals
• Length: 10 Ft
• Gauge: 16