- (2) JBL JRX212 1,000 Watt 12" Inch 2-Way DJ P/A Speaker Floor Wedge Monitor - NEW!
- (1) Crown Pro XLi1500 900w 2 Channel DJ/PA Power Amplifier Professional Amp XLI 1500
- (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cable 100% Copper
Authorized JBL Dealer!
Features of JRX212:
- JBL Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker
- JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil
- JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
- Advanced network topology crossover design
- High-voltage capacitors and inductors with massive cores and heavy gauge wire
- Progressive Transition™ high frequency waveguide
- 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure
- SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
- Non-resonant, all-steel handles
- 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10°
Specifications:
- Power Rating: 250 W RMS / 1000 W Peak
- Frequency Range (-10 dB) : 60 Hz - 20 kHz
- Frequency Response (±3 dB) : 80 Hz - 18 kHz
- Sensitivity (@1m): 98 dB SPL (1w/1m)
- Nominal Impedance : 8 ohms
- Recommended Amplifier Power : 250 W to 500 W into 8 ohms
- Maximum SPL: 128 dB
- Nominal Dispersion: 90º x 50º
- Crossover Frequency: 2.1 kHz
- Dimensions (H x W x D): 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)
- Weight: 19.5 kg (43 lb)
- High Frequency Driver: JBL 2414H-C 1" exit compression driver mounted on Progressive Transition™ Waveguide
- Low Frequency Driver: JBL M112-8
- Input Connectors: Neutrik® Speakon® NL-4 (x1); .25 in
- TS phone jack (x1); parallel
- Grille: 18-gauge, powder-coated steel
- Mounting & Suspension: 36 mm, dual-angle pole-mount socket
Authorized Crown Audio Dealer!
Description of XLI1500:
Powerful. Reliable.
Affordable.
The XLI Series of power amplifiers from Crown represents a new era in
affordable, quality power amplification. All four models in the series are
powerful, rugged and reliable. They are suited for musicians, DJs, and
entertainers as well as houses of worship, discos, and pubs.
Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.
Features:
- Crown Pro XLi1500 900 Watt 2-Channel DJ/PA Power Amplifier
- RMS Power @ 4 Ohms: 450 Watts x 2 Channels
- RMS Power @ 8 Ohms: 330 Watts x 2 Channels
- RMS Power @ 8 Ohms Bridged: 900 Watts x 1
- Frequency Response: 20 Hz - 20 kHz
- THD: <0.5%
- Distortion: <0.35%
- Slew Rate: >10V/us
- Voltage Gain: 31 dB
- Damping Factor: 8 Ohms, 10 Hz to 400 Hz
- Signal to Noise Ratio (A-Weighted): >100 dB
- Crosstalk: -75 dB, -59 dB
- Input Sensitivity: 0.775V or 1.4V
- Input Impedance: 20k Ohms, 10k Ohms
- AC Voltage: 110-120V~60 Hz
- IEC Power Connector: 15A
- Stereo/parallel/bridge-mono mode
- User selectable input sensitivity - 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive thermal buildup
- Electronically balanced RCA & XLR inputs; binding post and Speakon outputs
- Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
- Protection against shorts, no-load, on/off thumps and radio-frequency interference
- Product Dimensions: 19" x 3.5" 12.4" inches
- Product Weight: 28 Lbs.
Video of RCSS1425:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
- 100% Copper Conductors for Lower Resistance
- Black PVC Jacket for Both Durability and Flexibility
- Intended for High-Current Applications Only, Not Line-Level Signals
- Length: 25 Ft
- Gauge: 14
- UPC:
- 613817160715
