Package Includes:
- (2) Rockville DX12 12" Class D 2000w PRO Powered Active DJ PA Speaker 500w RMS! Loud
- (1) Pair of Rockville Adjustable Tripod Speaker/Light Stands+(2) 20 Foot XLR Cables
- (1) Rockville RFAAW 112" x 48" DJ Event Facade Light Weight Frame Booth+Bag+Scrims
- (1) Rockville RMC-XLR High-End Metal DJ Handheld Wired Microphone Mic w (2) Cables
All About Your DX12:
What's In The Box:
- Speaker
- 6 ft. Power Cable
- Video Owner Manual
- Warranty Card
Description:
Double the power!
The DX12 by Rockville is the step up model to our famous RPG12 PA speaker line. This has the same amount of power as our TITAN series. This model has 2,000 watts peak, 1,000 watts program, and 500 watts RMS! This speaker will compete with speakers that are way more expensive.
Our DX build quality
This uses a thick high quality polypropylene cabinet that is tuned to sound perfect with our built in amp and drivers. This model weighs in at 47.40 LBS. We use a class "D" amplifier that drives this speaker with 500w RMS which is enough power to fill a large venue with hundreds of people in it. This model uses an extra large 1.75" titanium compression driver which is accurately tuned with a 2700Hz crossover that delivers incredibly clear highs. We also use a highly efficient woofer with a 2.5" voice coil that delivers nice mids and lows. The sound quality is amazing whether you use this as your main speaker or as a stage monitor.
Dual Angle Pole Mount!
The bottom of the speaker contains 2 standard 35MM pole mounts. One of them will sit completely vertical onto your stand while the other will tilt downward approximately 15 degrees which is perfect for stages or for tall stands.
Fly points
If you want to hang this speaker from your ceiling then you can use the 3 built in fly points on top of the speaker.
Built in Mixer
The built in mixer has (2) channels. One mic input (XLR / ¼" combo jack) and one line input (XLR / ¼" combo jack). We also give you bass and treble controls over your master mix so you can fine-tune your sound. The clipping indicator light helps you easily set your levels safely without distortion. The XLR mix output allows you to send your signal out to another speaker, or a subwoofer.
Built-in limiter
The built in limiter fully protects the speaker from distortion at any volume level. This means you can play the speaker at full volume without worrying about the amp or speaker getting damaged. The limiter detects distortion frequencies allowing you to pound the speaker for as long as you wish without having to worry about damage or distortion sounds.
Sound dispersion
Some speakers sound great when you are standing in front of them. Our speaker sounds great no matter where you are standing in the room! This speaker delivers a 90° x 60° coverage pattern. This is due to our specially designed wave guide technology, which helps sound transmit at a wide angle while lowering attenuation.
Other cool features
The full grill design looks professional and protects the speaker better than a half grill. There is also a foam pad between the grill and the speaker that protects it from dust and eliminates any chance of the grill making even the slightest rattle. The dual carry handles make this easy to travel with as well as easy to place and remove from your speaker stand. The shape of the enclosure allows you to mount it on its side for use as a stage monitor.
90-day money back guarantee!
This speaker is the best in its class guaranteed! If you are not 100% satisfied with the speaker, we will take it back and cover the return shipping!
Features:
- Rockville DX12 12" Active/Powered Class "D" 2,000 Watts DJ/PA Speaker System
- 500-Watt True RMS / 1,000 Watts Program Power / 2000 Watts Peak
- Compact and light weight system delivers distortion free sound even at max volume
- Class D amplifier technology: high power, light-weight, and ultra efficient on energy consumption
- High power long-throw 12'' woofer with 2.5" OFC copper voice coil and 50 Oz magnet
- Enlarged 1.75'' titanium compression driver for crystal clear high-frequency reproduction
- Dual stand mounting with 35-mm pole sockets (One is vertical and the seconds is angled down)
- Frequency Response: 55Hz - 20KHz
- Maximum SPL @1w/1m: 125dB peak
- Custom engineered limiter allows the speaker to play at extremely high volumes while limiting the undesirable frequencies
- Built-in bass and treble adjustments
- 2 Channel mixer built in with one mic input and one line input via XLR & 1/4-inch combo jacks with volume control
- Balanced line output via XLR for linking additional speaker systems or for adding a subwoofer
- Clip/limit LED indicator makes it easy to set your levels
- Power and signal LED indicators
- A full grilled front cabinet perfectly protects speaker against road damage
- Enclosure is made of rugged drop tested high grade polypropylene construction
- Dual handles making it easy to place the speaker onto a stand
- Fly points
- Sound dispersion at 10dB: H90° x V60°
- Sensitivity: 96dB
- Crossover: 2700Hz
- 110 volt power supply with external user serviceable fusing
- Dimensions of speaker: 14.17"x 13.78" x23.62" (Inches; L x W x H)
- Weight of speaker: 45.63 lbs.
All About Your RVSS2-XLR:
How To Set Up Your RVSS2-XLR:
How To Set Up Active and Passive Speakers to Your RVSS2-XLR:
How to Set Up Your PA Speaker Stands:
Video of RVSS2-XLR:
Description:
This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment. This package also comes with two 20 foot XLR cables.
Features:
- Adjustable Height
- Steel Construction
- Black Color
- Weight capacity: 132 LBS
- Adjustable Height Range: 47.25-78.75 inches
- Base spread: 15-40 inches
- Tube Diameter: 1.5 - 1.37 inch
- Leg Diameter: 1.37 inch
- Includes (2) 20 Foot XLR Female to XLR Male Cables
- Includes (1) Travel Bag
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.Great features and great quality make Rockville a great choice.
All About RFAAW:
All About Rockville DJ Facades and Accessories:
How To Set Up Your RFAAW | RFAAB:
Each Set Includes:
- (4) Panels each 27.5" W x 47.2" H
- Stretchable White Scrim
- Carry Bag for easy Transport
- 3M Velcro
Description:
The Rockville RFAAW DJ Event Facade is the best in its class! Our Rockville employees have used all the popular Façades on the market and had so many frustrations, so we decided to make our own!
What makes ours way better:
1. Light-weight
Our panels are made out of pure aluminum! Other brands use steel which is not as durable and weighs a lot more. They use this material simply because it is cheaper. We had the option during product development to choose steel or aluminum. The steel would have cost $10 less actually. We went with the aluminum because it is lighter in weight and much stronger.
2. Larger panels
We made each of our panels 27.5" inches wide. We include 4 panels which totals 110" inches. Our competitors panels are too small. Their panels are around 17 - 20 inches wide each panel. That adds up to only 80" inches. You would have to use a pretty small table or buy 2 facades. I am talking from personal experience.
3. Foldable design for quick setup and break-down
Our design folds for easy setup and breakdown! Our competitors advertise that their item can fold and break down easily. I've used them, and you have to literally disconnect the hinges, and then next time you use them again you have to reconnect it. I do not consider it quick or easy. Ours literally just folds and you do not have to disconnect all the hinges. Our model is the only one I have seen on the market that truly folds for quick and easy transport.
4. 360 Degree panel rotation
Our panels can rotate a full 360 degrees, giving you the freedom to wrap these around a table and angle them perfectly to make your setup professional looking. One of the biggest issues that annoyed me the most about the competitor's panels is that they have huge limitations in the angles of their panels. What was most annoying to me was that when you try to angle them how you want, they either got stuck or the hinges popped out and I had to set them up again and again. With the Rockville 360 degree rotating panels you are completely free to angle your panels easily without any limitations!
5. Built-in scrim!
The stretch fabric panels are easily removable for cleaning. Our scrim can be washed by hand in cold water and laid down flat to dry. Our scrim is also a fire retardant.
6. Travel bag included
Transportation and storage is simple with the included carry bag.
7. Non-slip rubber feet for stability
We decided to add rubber non-slip feet to our model. This adds more stability to the façade.
8. Expandable!
We sell models RAPFAW and RAPFAB which are add on panels so you can expand your black or white facade and have an unlimited amount of panels connected together. We also sell separately models RSCFAB and RSCFAW which are black or white scrims. This way you can interchange the color of your scrim depending on the event you are using this for. Another purpose of this is if you want to have one set in the wash you can still have a backup available.
9. Price!
I personally felt like I got ripped off when I paid over $250 for a DJ Event Façade. I did not see any reason for it to cost so much. I got even more upset when I put it together and it did not feel like $250. We decided to go to market with a product twice as good at half the price! We want the best gear to be affordable for everyone!
10. 90 Day Money Back Guarantee including return shipping!
If for any reason you are not 100% satisfied with your purchase we will send you a prepaid shipping label and refund you in full for this item. We know that this will be the best Façade you have ever purchased so it is highly unlikely you will want to return it.
Features:
- Rockville RFAAW 112" x 48" DJ Event Facade Light Weight Aluminum Frame + Travel Bag + Scrims
- (4) Panels included - each are 27.5" W x 47.2" H
- Light Weight Aluminum Frames. The entire product weighs 7 LBS, around a third of the weight of our competitors who make their panels out of steel! Also our light-weight aluminum is much stronger than steel
- Includes travel bag for easy transport
- Includes white scrim
- Includes a carrying bag to store and keep facade scrim looking its best
- Folds for easy break down and travel - no need to disconnect the hinges!
- 360 degree rotating panels allows each panel to be positioned to your liking with no limitations
- Detachable hinges
- Includes white scrim made of a special stretch material
- Scrim is fire retardant
- Scrim is easy to wash - simply wash with cold water and lay it flat to dry
- Non-slip rubber feet for stability
- Expandable: Add additional panels sold seperately (models RAPFAW and RAPFAB)
- Additional scrims available in our store in black and white (models RSCFAB and RSCFAW)
- Product Weight: 7 LBS
- Packaged Shipping Weight: 10 LBS
All About Your RMC-XLR:
How To Set Up RMC-XLR:
Unboxing of RMC-XLR:
Description:
The Rockville RMC-XLR is the same exact microphone we use in our Pro Mic Kit 1 microphone/stand bundle. This mic was created because we saw a need in the market for a high quality microphone at an affordable price. We found there were a lot of good mics around from reputable brands that sound great, but are very expensive. When we looked at the cheaper mics on the market from both reputable and entry level brands; we were not impressed at all. As a result we sent our very own product developers on a mic testing journey. A lot of our employees here at Rockville love to do karaoke, so it was not long before we found a mic that we all loved.
You may be asking yourselves, so what makes this mic sound so good? There are 3 main components that make a mic sound the way it does. The cartridge, the magnet, and the mic cable. Our mic uses an M-56 cartridge which has a neodymium magnet. This combination of components supplies better sensitivity; which means your mouth will not have to be on the mic for it to pick up the sound. Our components supply more than a great pickup pattern. They have very little background noise, and great tone.
We pay a lot of attention to detail. We could have saved a lot of money and got our cost down by including a cheap cable, but we know how important the cable is. We are very passionate about our products and we really have a lot of respect for our customers. For this reason alone we included 100 % OFC copper cables. There is no aluminum in this cable! It is Pure oxygen free copper. What this means is that the cable will last longer and will sound a lot better. You will get a distortion free signal. We use a true gauge mic cable with proper thickness.
The body of the microphone is also something we paid a lot of attention too. We did not want it to be too light and feel cheap. We made a nice solid metal microphone. It has a great feel to it. We could have gone with plastic or cheaper metal, but we wanted to go with a mic that we ourselves would want to use.
90 Day Money Back Guarantee including return shipping!
If within the first 90 days you are not 100 % satisfied for any reason, contact us and we will send you a return label and give you all your money back! (Item must be returned complete with all accessories and the original box please.
What's Included:
- Fully Metal Wired Mic
- (2) 100% OFC Copper Mic Cables (XLR to ¼" + XLR to XLR )
- Mic Clip
- Plastic Carry Case
- Owner's Manual
- Warranty
Features:
- Rockville RMC-XLR High-End Metal Handheld Wired Microphone Mic Amazing Sound!
Mic Features:
- M-56 Cartridge
- Full metal mic body
- Type: Dynamic
- Neodymium magnet
- Polar Pattern: uni-directional
- Frequency Response: 80 - 13Khz
- Impedance: 600 Ohms ± 30%
- Sensitivity: -72 ± 3dB
Case Features:
- High quality plastic carry case protects the mic during transportation
- Comfortably holds microphone and mic cable
Cable Features:
- XLR to ¼" Cable
- XLR to XLR Cable
- 10 Feet each
- 100% OFC oxygen free copper
- Cable delivers crystal clear distortion free signal
- Cable is 5 MM thick with cover (22 AWG standard mic cable)
- XLR cable connectors are very solid and durable
Mic clip Features:
- Heavy Duty Standard Size Microphone Clip
- Stand Mountable
- Solid Plastic Construction with copper inside (part that screws to the mic)
- Black Color
