Package Includes:
- (2) Rockville DX12 12" Class D 2000w PRO Powered Active DJ PA Speaker 500w RMS! Loud
- (1) Pair of Rockville Adjustable Tripod Speaker/Light Stands+(2) 20 Foot XLR Cables
All About Your DX12:
What's In The Box:
- Speaker
- 6 ft. Power Cable
- Video Owner Manual
- Warranty Card
Description:
Double the power!
The DX12 by Rockville is the step up model to our famous RPG12 PA speaker line. This has the same amount of power as our TITAN series. This model has 2,000 watts peak, 1,000 watts program, and 500 watts RMS! This speaker will compete with speakers that are way more expensive.
Our DX build quality
This uses a thick high quality polypropylene cabinet that is tuned to sound perfect with our built in amp and drivers. This model weighs in at 47.40 LBS. We use a class "D" amplifier that drives this speaker with 500w RMS which is enough power to fill a large venue with hundreds of people in it. This model uses an extra large 1.75" titanium compression driver which is accurately tuned with a 2700Hz crossover that delivers incredibly clear highs. We also use a highly efficient woofer with a 2.5" voice coil that delivers nice mids and lows. The sound quality is amazing whether you use this as your main speaker or as a stage monitor.
Dual Angle Pole Mount!
The bottom of the speaker contains 2 standard 35MM pole mounts. One of them will sit completely vertical onto your stand while the other will tilt downward approximately 15 degrees which is perfect for stages or for tall stands.
Fly points
If you want to hang this speaker from your ceiling then you can use the 3 built in fly points on top of the speaker.
Built in Mixer
The built in mixer has (2) channels. One mic input (XLR / ¼" combo jack) and one line input (XLR / ¼" combo jack). We also give you bass and treble controls over your master mix so you can fine-tune your sound. The clipping indicator light helps you easily set your levels safely without distortion. The XLR mix output allows you to send your signal out to another speaker, or a subwoofer.
Built-in limiter
The built in limiter fully protects the speaker from distortion at any volume level. This means you can play the speaker at full volume without worrying about the amp or speaker getting damaged. The limiter detects distortion frequencies allowing you to pound the speaker for as long as you wish without having to worry about damage or distortion sounds.
Sound dispersion
Some speakers sound great when you are standing in front of them. Our speaker sounds great no matter where you are standing in the room! This speaker delivers a 90° x 60° coverage pattern. This is due to our specially designed wave guide technology, which helps sound transmit at a wide angle while lowering attenuation.
Other cool features
The full grill design looks professional and protects the speaker better than a half grill. There is also a foam pad between the grill and the speaker that protects it from dust and eliminates any chance of the grill making even the slightest rattle. The dual carry handles make this easy to travel with as well as easy to place and remove from your speaker stand. The shape of the enclosure allows you to mount it on its side for use as a stage monitor.
90-day money back guarantee!
This speaker is the best in its class guaranteed! If you are not 100% satisfied with the speaker, we will take it back and cover the return shipping!
Features:
- Rockville DX12 12" Active/Powered Class "D" 2,000 Watts DJ/PA Speaker System
- 500-Watt True RMS / 1,000 Watts Program Power / 2000 Watts Peak
- Compact and light weight system delivers distortion free sound even at max volume
- Class D amplifier technology: high power, light-weight, and ultra efficient on energy consumption
- High power long-throw 12'' woofer with 2.5" OFC copper voice coil and 50 Oz magnet
- Enlarged 1.75'' titanium compression driver for crystal clear high-frequency reproduction
- Dual stand mounting with 35-mm pole sockets (One is vertical and the seconds is angled down)
- Frequency Response: 55Hz - 20KHz
- Maximum SPL @1w/1m: 125dB peak
- Custom engineered limiter allows the speaker to play at extremely high volumes while limiting the undesirable frequencies
- Built-in bass and treble adjustments
- 2 Channel mixer built in with one mic input and one line input via XLR & 1/4-inch combo jacks with volume control
- Balanced line output via XLR for linking additional speaker systems or for adding a subwoofer
- Clip/limit LED indicator makes it easy to set your levels
- Power and signal LED indicators
- A full grilled front cabinet perfectly protects speaker against road damage
- Enclosure is made of rugged drop tested high grade polypropylene construction
- Dual handles making it easy to place the speaker onto a stand
- Fly points
- Sound dispersion at 10dB: H90° x V60°
- Sensitivity: 96dB
- Crossover: 2700Hz
- 110 volt power supply with external user serviceable fusing
- Dimensions of speaker: 14.17"x 13.78" x23.62" (Inches; L x W x H)
- Weight of speaker: 45.63 lbs.
All About Your RVSS2-XLR:
How To Set Up Your RVSS2-XLR:
How To Set Up Active and Passive Speakers to Your RVSS2-XLR:
How to Set Up Your PA Speaker Stands:
Video of RVSS2-XLR:
Description:
This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment. This package also comes with two 20 foot XLR cables.
Features:
- Adjustable Height
- Steel Construction
- Black Color
- Weight capacity: 132 LBS
- Adjustable Height Range: 47.25-78.75 inches
- Base spread: 15-40 inches
- Tube Diameter: 1.5 - 1.37 inch
- Leg Diameter: 1.37 inch
- Includes (2) 20 Foot XLR Female to XLR Male Cables
- Includes (1) Travel Bag
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.Great features and great quality make Rockville a great choice.
