- (2) Rockville DPM8B 8" 2-Way 300W Black Active/Powered Studio Monitor Speakers
- (1) Pair of Rockville RRS263M High Density Foam Studio Monitor Isolation Pads 10.35" x 13" with 3 Angle Adjustments
Price is for (2) Rockville DPM8B Powered Studio Monitors
Each Monitor Has its Own Amplifier Built In
How to Set Up your DPM Series Speakers:
Video of DPM8B:
Description:
The Rockville DPM8
Active/Powered Studio Monitor Speaker is a step-up version of our
popular APM series. These speakers are sold individually and each
speaker is bi-amped which means it has one amp for the highs, and
another for the lows. These speakers have 300 watts of peak output power
and 150 watts RMS. These sound better than the famous brand studio
monitors. They have a flat frequency curve making these the perfect
studio monitors. The only reason our price point is not 300 % higher is
because you are buying directly from the manufacturer. We are one of
the leading speaker manufacturers in the USA, and we have a state of the
art manufacturing process. There is a lot to talk about so I will break
it down into sections.
Description of the Enclosure:
We chose a wooden enclosure as opposed to a plastic enclosure. Your
studio is made of wood for a reason. The sound characteristics of high
quality wood are better than plastic. We only use the highest quality
MDF wood. We do not bother with cheap particle board material when we
want to make the best speakers. The thickness is 0.5” around and the
front board is a full 1” thick to give you the best sound quality
possible. The enclosure is built with the perfect amount of air space to
maximize sound quality for a studio.
Every studio or computer room should look beautiful. We believe speakers
should enhance the look of a room. We make these speakers in 3
beautiful finishes: painted black, painted white, and wood finish. We
use “baking paint” made for wood surfaces. Baking paint is long lasting
and is the best paint for speakers! We went with a beautiful finish that
is mostly matte with a slight shine to it. Our designers spent
countless hours on the color and design to make sure it is not only
beautiful, but elegant as well to improve the appearance of your studio
or room. We kept all the controls on the back of the speaker, which will
keep the speaker looking very clean and modern. The tweeter has a
curved front bezel to make the highs crystal clear and distortion free.
Amplifier and Speaker Components Details:
To get the most efficiency we use a class “D” amplifier. We use the best
quality components from the most reputable circuit manufacturers in the
world in order to produce crystal clear sound. Most brands do not like
to reveal what’s in the guts of the speaker. We feel differently. We
want you to know what is inside so you realize how good of a value we
are offering and also so that you can understand how good these really
are. We use ADAU 1701 Digital Sound Processor (DSP) for audio processing
and TPA3116 for amplification. These are both known to be the best in
class circuit designs. These components are amazing and allow us to
adjust the sound via soft programming on a computer during the design
stage to get the perfect sound. ADI and TI are the names of the makers
of these ICs. Most people do not know the brand names that make
circuits; but these are the most famous and reliable in the industry.
Only very high end manufacturers like us use these components.
For highs, we use Ferro fluid enhanced 1.5" neodymium silk dome tweeters
with metal grill protection. If you are an audiophile, I am sure you
have tested and love the sound of silk dome tweeters. The neo magnet is
strong and can handle a lot of heat. This enabled us to beef up the
amplifier power without having to worry about melting or blowing the
tweeter. The highs on these sound really good! I cannot wait for you all
to hear it in person, because I cannot describe how good these sound!
You really need to listen to them in person.
We use a 8” woofer that will out-perform a regular 8” woofer any day!
The bass sounds amazing on these! Very clear and punchy! The woofer has
an injection molded polypropylene cone. This is an engineered type of
plastic that is used on many speakers today. It is strong and puts out a
great sound. The rubber woofer surrounds increase sound quality and
eliminate unwanted distortions. They sound better than foam surrounds in
my opinion, which is why we went with rubber. The computer optimized
electronic crossover network supplies amazing sounding highs, lows, and
mids — basically it filters out unwanted frequencies from each component
so that each speaker plays the right frequencies, which in turn allows
the speaker to be louder without distorting. We use very high-grade
crossover filters in our speakers. The specially wound voice coils
produce accurate responses along the entire frequency spectrum. We
developed the speakers with the most optimized magnet structure, cone,
and cabinet space, with the goal of reproducing the sound to play back
exactly the way it was recorded!
Added Benefits:
Our factory uses the latest Precision Glue Machine (Over 500 meter
Tunnel Oven). But you may ask why am I talking about glue? Well,
actually, the glue on the speakers is of the upmost importance. If the
glue does not hold up, the speaker will be done and blow. We use the
latest machinery to manufacture these speakers. The SPL of the speaker
goes up when you use better glue and a better machine that can secure
the glue in place. If the glue can handle more heat, than your speaker
can handle more power!
Thick “Wadding” protects the inside of the speaker cabinet. This can be
seen if the speaker cabinet is removed. Basically, wadding is a white
chemical silk type of material that we put inside the speaker cabinet
for multiple reasons. It helps to make the sound clearer, and at the
same time it protects all the parts inside the speaker. This material is
also fire retardant. This is unique to our speakers. Most other brands
do not take this step due to the cost of the material, but it is a game
changer if you are trying to create the best speaker!
Inputs and Outputs and Rear Panel Controls:
As I mentioned earlier, we kept all the controls on the rear of the unit
to make the speaker look clean and modern. The Volume, High Pass filter
and Low Pass filter controls are all found on the rear of the unit. The
DPM8 has all your standard studio inputs and outputs such as a ¼” TRS
and XLR balanced input jacks, and RCA input.
Features of DPM8B (You will get 2 of these)
- Rockville DPM8B 8" 2-Way 300W Active/Powered Studio Monitor Speaker in Black
- Peak Power: 300 Watt
- RMS Power: 150 Watt
- Bi-Amped: 45 Watts for highs, and 105 watts for the lows
- Enclosure is made of top quality MDF
wood. Our enclosure is not particle board; it is true high-grade MDF!
The enclosure is 0.5” thick around while the front board of it is a full
1” thick to give you the ultimate best sound quality!
- We use “baking paint” made for wood surface. It lasts long and is the best paint for speakers!
- Beautiful finish is matte with a
slight shine to it. Our designers spent a lot of time on the color to
make it beautiful and elegant looking to improve the appearance of your
studio or room
- The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
- The port is built to the perfect spec to enhance the sound
- Auto-Switching Power Supply
- Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter With Metal Grill Protection
- Tweeter has 1” voice coil diameter
- Curved Front Bezel Design Eliminates Standing Wave Distortion
- Injection Molded Polypropylene Cone Woofer
- Rubber woofer surrounds increases sound quality and eliminates unwanted distortions
- Computer Optimized Electronic Crossover Network Supplies Amazing Sounding Highs, Lows, and Mids
- We developed the Most Optimized
Magnet structure, Cone, and Cabinet Space that Reproduces the Sound to
Play Back Exactly the Way it was Recorded!
- Specially Wound Voice Coils Produce Accurate Responses along Entire Frequency Spectrum
- Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
- Our factory uses the latest
Precision Glue Machine (Over 500 meter Tunnel Oven). To put it in simple
to understand terms; the glue on the speakers is of the upmost
importance. If the glue does not hold up, the speaker is done. We use
the latest machinery to manufacture these speakers. The SPL of the
speaker goes up when you use better glue and a better machine the secure
the glue in place
- Thick “Wadding” protects inside the
speaker cabinet – Wadding is a white chemical silk type of material that
we put inside the speaker cabinet for multiple reasons. It helps to
make the sound come out more clear, and it also protects all the parts
inside the speaker. This material is also fire retardant. This is unique
to our speakers. Most other brands do not take this step due to the
cost of the material, but it is a game changer!
- World class top of the line
audiophile grade components! We use ADAU 1701 Digital Sound Processor
for audio processing and TPA3116 for amplification. These are both known
to be the best in class circuit designs. These components are also
amazing and allow us to adjust the sound via soft programming on a
computer during the design stage to get the perfect sound. ADI and TI
are the names of the makers of these ICs. Most people do not know brands
who make circuits, but these are famous in that industry and are known
to be the best of the best. Only very high end products use these
components
- 110 Volt compatible with SMPS
technology – Normally most items have a transformer. Our SMPS technology
switches voltage more efficiently and adheres to all international
efficiency standards!
- Every Speaker in Production
Undergoes a Computer Generated Sound Check Test to Ensure it Upholds to
our Specifications and Standards
- We use a “6Sigma” style Quality
Assurance of Each Product (Long story short, each product will work
perfectly as advertised for a long long time!)
- Transducer Production Line to Make the SPL Performance Stable
Inputs / Outputs / Controls:
- Volume control
- Independent High (–2dB – +1dB) and Low (–2dB – +2dB) frequency level controls
- One each ¼” TRS (TS capable) and XLR balanced input jacks
- RCA input
Details:
- Certification: CE and RoHS Compliant
- Amplifier: Class D, very efficient amplifier with top components! (ADI--ADAU1701 DSP, TI--TPA3116, SMPS)
- System Impedance: Tweeter 6 O ; Woofer 4 O
- Signal to noise ratio: 80dB (Maximum output with THD+1<1%, A-weight)
- Max SPL: 106dB @ 1w/1m
- THD: 0.10%
- Frequency Response: 30Hz - 20kHz
- 300 Watts peak output
- 150 Watt RMS output
- Input voltage: 120V
- Components: 1.5" neodymium silk dome tweeter and 8" woofer with rubber surrounds and polypropylene cone
- Product Dimensions in Inches (Single): (W*H*D) 9.92” x 15.35'' x 12.20''
- Shipping Dimensions in Inches (For pair boxed): (W*H*D) 15.94'' x 19.52'' x 13.94''
- Net Weight: 22.06 LBS
- Shipping Weight: 26.47 LBS
- Includes power cord
- Input Impedance (Ohms): 10 K Ohm Balanced
- System Volume: (-30dB to +6dB)
Video of RRS263M:
Description:
The Rockville RRS263M is specially designed to increase monitoring accuracy. These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 10.5" by 13" and includes 2 pads which will accommodate (2) monitors.
Isolate your speakers!
Rockville
isolation pads are designed to acoustically isolate your studio
monitors. They were designed to work in studios and give studio quality
sound; however some customers will also use them for high end home
theater setups. Typically when speakers are placed on hard surfaces,
they can vibrate. The vibrations cause the speakers’ sound to become
inaccurate, unfocused and lose their “musical transparency." The
Rockville Isolation Pad package includes a pair of high-density acoustic
foam pads with multiple angle inserts that allow you to fine-tune your
speakers positioning. Though conceived and designed for studio
monitors/speakers you can decouple and isolate any sensitive studio
device such as DVD players, turntables and laptops.
How to get maximum performance from your Monitors!
Rockville
Studio Isolation Pads are the most cost-effective improvement you make
to your sound system. Imagine the isolation pads as being your speaker
systems “shock absorbers”. Place the Rockville Isolation Pads under
your monitors they will absorb vibrations and decouple your monitor to
stop vibrations that would otherwise transfer into your studio
environment. Isolation Pads will make a day and night difference in the
sound quality of your studio. You spent good money on your studio
monitors, now go the extra mile to make them sound their best.
Rockville Studio Isolation Pads Feature:
- Easiest and affordable way to improve your studio monitors sound
- Decouples your studio monitors from desktops and monitor stands for accurate reproduction
- Each package contains 2 Isolation Pads - enough for 2 studio monitors
- 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees
- Supports up to 100 lbs., so they can isolate a variety of studio gear
- Handsome charcoal gray color
What Rockville Isolation Pads do is called "decoupling." When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations don’t get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the “coupled” vibrations, will be heard giving you false sound reproduction. But because these “coupled” vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By “decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system.
Perfectly position your monitors
Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning.
The most affordable way to improve the sound of your studio monitors
Features:
- Rockville RRS263M Monitor Isolation Pads
- 10.5" x 13"
- 3 Adjustable Angles
- High quality, High Density Foam
- Eliminates vibrations and unwanted noises in your studio
- Price is for (2) pads which accommodates (2) speakers
- UPC:
- 613815948629
