Package Includes:

• (2) New Mackie C200 10" 2-Way Compact SR PA Speaker Passive Version of SRM350
• (1) Rockville RPA9 3000 Watt Peak / 800w RMS 2 Channel Power Amplifier Pro/DJ Amp
  
• (1) Pair of Rockville Tripod Speaker/Lighting Stands+(2) 20 Foot 1/4"-SpeakOn Cables
  

---

DESIGNED AND TUNED BY EAW
The new C Series Passive Loudspeakers represent Mackie's first lightweight passive speakers designed and tuned exclusively by the Eastern Acoustic Works (EAW) loudspeaker engineering team--the same folks responsible for designing loudspeaker systems for the Super Bowl, the Olympics and the Vatican. And although loudspeakers for these mega-systems cost exponentially more than the humble C200, some of the same concepts applied, namely: designing custom 10" LF drivers with a frequency range from 59 Hz – 3000 Hz and a 2" voice coil that can take a pounding. And a 1.4" High-Frequency titanium Driver and Horn providing a wide, controlled dispersion pattern and precise reproduction of the critical 1000 Hz – 20,000 Hz upper mid-range and high frequencies.

CROSSOVERS TUNED TO PERFECTION
Tuning a crossover (i.e. voicing a system), involves dozens of critical decisions that many manufacturers overlook. In the end, it is all about balancing the design so that you get the best subjective results from the speaker while maintaining a good technical implementation. The crossover in the C Series is a unique Low Impedance Compensated Crossover (LICC) design with an asymmetrical slope. With EQ and crossover points meticulously chosen so that beamwidth patterns match in both drivers, C Series loudspeakers offer natural sound at all volume levels. Read more.

ULTRA-WIDE DISPERSION
A loudspeaker's dispersion characteristic shouldn't be lame just because its compact in size. We know that venues like coffee houses and small theatre / rec rooms can be hard to cover. Owners usually have to make do with odd shaped rooms and fixtures placed wherever they fit. The C200's high-frequency compression driver is mounted on an acoustically non-resonant exponential waveguide, providing a wide, controlled dispersion pattern and precise reproduction of the critical upper mid-range and high frequencies. The result is an unbelievably smooth off-axis response that allows everyone in the audience to experience the same high-resolution audio no matter where they are seated.

THINKING INSIDE THE BOX
Anyone with a factory can build a box and stick some speakers in it (and that's just what many do). But low-frequency transducers in square boxes can create resonances that reflect off the rear wall and pass through the woofer cone out of phase, and ready to mess up your sound. The C200 enclosure is an asymmetrical monocoque design with no parallel surfaces, causing mid and high frequency resonances to be reflected at angles into internal damping materials, instead of interfering with the woofer doing its thing.

BUILT FOR SERIOUS ABUSE
Designed for use with existing speakers and power amps (and optimized for use with the Mackie PPM Series), the C200 loudspeakers are passive versions of our industry-standard SRM350 portable active loudspeakers. These speakers' injection-molded composite chassis is built for the rigors of the road. And they shrug off impacts that would turn those cheap-o, fuzz covered wood box speakers into toothpicks.

MAKES A WONDERFUL FLOOR MONITOR TOO!
Floor Monitor A good floor monitor plays loudly without generating feedback through vocal microphones. A poor floor monitor, on the other hand, will generate feedback just about the time you turn it up to a useable level. Floor monitor feedback is often caused by uneven frequency response and dispersion; some frequencies arrive at the microphone much louder than others. These "spikes" are what trigger feedback as the floor monitor volume is increased. The C200 has incredibly smooth, spike-free response and dispersion over a wide range of treble frequencies. So you can increase its volume without boosting those nasty, feedback-inducing spikes. Without extensive tuning, no passive speaker or specialized floor wedge in this class can even come close.

Features:

• Mackie C200 Passive 10" 2-Way Passive 2-Way loudspeaker
• Portable Precision Passive loudspeaker with high-precision 1.4" HF  titanium compression driver and 10" LF transducer
• Wide, even dispersion pattern means everyone in the audience hears great  sound
• Asymmetrical cabinet design for best acoustical response
• Integrated low-impedance compensated crossover and transducer protection
• Tough, impact-resistant enclosure with sturdy handles, pole-mount, and  integrated rigging points
• 500W peak power handling at 8 ohms
• Three setup configurations: pole mount, flyable and wedge

Details:

• Frequency Response (–3 dB):  89Hz – 20kHz
• Frequency Range (–10 dB): 59Hz – 22kHz
• Maximum SPL Long-term @ 1m: 118dB
• Crossover Frequency: 1800Hz
• AUDIO:: Input Type: Speakon®-style 1/4-inch TS phone jack
• Input Impedance: 8 ohms
• Power Handling: (RMS) 200 watts, (Peak) 500 watts

---

All About Your RPA9:

How to Set Up Your RPA5 & RPA9:

Description:

Heavy-Duty Powerhouse Pro Amplifier
The Rockville RPA9 3000-watt power amplifier combines efficiency with great sound to deliver a lightweight amplifier that packs a ton of punch. This amplifier is engineered using advanced design and components, creating a lightweight design and extremely reliable operation that can pound daily for years and years of use. The computerized IC controlled protection circuitry allows delivery of peak power while preventing overloads. The RPA9 is optimized for 4 and 8-ohm speakers, and is equipped with a stereo/mono speaker output switch allowing for quick system impedance optimization. The RPA9 amp fits perfectly into standard 19” racks, and is lightweight enough (less than 30 lbs.) to make it incredibly easy to transport.

Top features!
We added a built in crossover so that you can use the amplifier for subwoofers or full range speakers. When connecting subwoofers simply select the low pass. We also added a link output which will allow you to use (2) of these amplifiers together at the same time for venues that demand even more power.

The other enhancement we made is that we added all the input and output terminals that ensure this amplifier is compatible with any setup!

We added XLR and ¼” combo jacks and RCA inputs making this amp perfect for any mixer and any speakers on the market. For outputs, we have banana and speakon outputs plus XLR direct outputs.

Mono Subwoofer-ready
A stereo/mono switch on the rear of the system allows for quick configuration to use multiple speakers in stereo mode or a single subwoofer in mono mode.

Power Ratings:

• RMS Power Output:
  
• Stereo 8 Ohm: 2 x 250W
  
• Stereo 4 Ohm: 2 x 400W
  
• Bridged 8 Ohm: 1 x 800W
  
• Peak Power Output:
  
• Stereo 8 Ohm: 2 x 1000W Max
  
• Stereo 4 Ohm: 2 x 1500W Max
  
• Bridged 8 Ohm: 1 x 3000W Max
  

Terminals:

• Input Terminals:
  
• Combo jack (XLR and ¼”) A & B inputs
  
• RCA A & B Inputs
  
• Output Terminals:
  
• Banana binding post speaker output
  
• Speakon output
  
• XLR direct output
  

Features:

• Rockville RPA9 3000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
  
• 2U rack space
  
• Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
  
• Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers
  
• Channel A & B Clipping Led Indicators
  
• Channel A & B Separate Level Controls
  
• Power, signal, overload, clipping, and protection LED indicators on front of amp
  
• Heavy duty rack mount ears with handles
  
• Built-in dual high velocity quiet cooling fans
  
• Maximum headroom for 4-ohm and 8-ohm Speakers
  
• Level controls for precise setting and matching of sensitivity
  
• Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
  
• User serviceable fuse (5A, 250V)
  
• Frequency Response: 20Hz to 20KHz <+/- 0.5dB
  
• Distortion: <0.03%
  
• Input Impedance:  20K Ohm Balanced and 10K Ohm Unbalanced
  
• Signal to Noise Ratio: > 102dB
  
• Power Requirements: 120V / 50-60Hz
  
• Weight: 17.19 lbs
  
• Dimensions: 18.97 x 13.97 x 3.54 inch

---

How to Set Up Your PA Speaker Stands:

Video of RVSS2-TSNL4:

Description:

This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment. This package also comes with two 20 foot 1/4" Speakon NL-4 cables!

Features:

• Adjustable Height
• Steel Construction
• Black Color
• Weight capacity: 132 LBS
• Adjustable Height Range: 47.25-78.75 inches
• Base spread: 15-40 inches
• Tube Diameter: 1.5 - 1.37 inch
• Leg Diameter: 1.37 inche
• Includes (2) 20 foot 1/4" to Speakon NL-4 speaker cables
• Includes (1) Carry Bag

 

 

---

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.

Great features and great quality make Rockville a great choice.