Package Includes:
Authorized Chauvet Dealer
DESIGNED AND TUNED BY EAW
The new C Series Passive Loudspeakers represent Mackie's first lightweight passive speakers designed and tuned exclusively by the Eastern Acoustic Works (EAW) loudspeaker engineering team--the same folks responsible for designing loudspeaker systems for the Super Bowl, the Olympics and the Vatican. And although loudspeakers for these mega-systems cost exponentially more than the humble C200, some of the same concepts applied, namely: designing custom 10" LF drivers with a frequency range from 59 Hz – 3000 Hz and a 2" voice coil that can take a pounding. And a 1.4" High-Frequency titanium Driver and Horn providing a wide, controlled dispersion pattern and precise reproduction of the critical 1000 Hz – 20,000 Hz upper mid-range and high frequencies.
CROSSOVERS TUNED TO PERFECTION
Tuning a crossover (i.e. voicing a system), involves dozens of critical decisions that many manufacturers overlook. In the end, it is all about balancing the design so that you get the best subjective results from the speaker while maintaining a good technical implementation. The crossover in the C Series is a unique Low Impedance Compensated Crossover (LICC) design with an asymmetrical slope. With EQ and crossover points meticulously chosen so that beamwidth patterns match in both drivers, C Series loudspeakers offer natural sound at all volume levels. Read more.
ULTRA-WIDE DISPERSION
A loudspeaker's dispersion characteristic shouldn't be lame just because its compact in size. We know that venues like coffee houses and small theatre / rec rooms can be hard to cover. Owners usually have to make do with odd shaped rooms and fixtures placed wherever they fit. The C200's high-frequency compression driver is mounted on an acoustically non-resonant exponential waveguide, providing a wide, controlled dispersion pattern and precise reproduction of the critical upper mid-range and high frequencies. The result is an unbelievably smooth off-axis response that allows everyone in the audience to experience the same high-resolution audio no matter where they are seated.
THINKING INSIDE THE BOX
Anyone with a factory can build a box and stick some speakers in it (and that's just what many do). But low-frequency transducers in square boxes can create resonances that reflect off the rear wall and pass through the woofer cone out of phase, and ready to mess up your sound. The C200 enclosure is an asymmetrical monocoque design with no parallel surfaces, causing mid and high frequency resonances to be reflected at angles into internal damping materials, instead of interfering with the woofer doing its thing.
BUILT FOR SERIOUS ABUSE
Designed for use with existing speakers and power amps (and optimized for use with the Mackie PPM Series), the C200 loudspeakers are passive versions of our industry-standard SRM350 portable active loudspeakers. These speakers' injection-molded composite chassis is built for the rigors of the road. And they shrug off impacts that would turn those cheap-o, fuzz covered wood box speakers into toothpicks.
MAKES A WONDERFUL FLOOR MONITOR TOO!
Floor Monitor A good floor monitor plays loudly without generating feedback through vocal microphones. A poor floor monitor, on the other hand, will generate feedback just about the time you turn it up to a useable level. Floor monitor feedback is often caused by uneven frequency response and dispersion; some frequencies arrive at the microphone much louder than others. These "spikes" are what trigger feedback as the floor monitor volume is increased. The C200 has incredibly smooth, spike-free response and dispersion over a wide range of treble frequencies. So you can increase its volume without boosting those nasty, feedback-inducing spikes. Without extensive tuning, no passive speaker or specialized floor wedge in this class can even come close.
Authorized Rockville Dealer
Great features and great quality make Rockville a great choice.
- (2) Mackie C200 10" 2-Way Compact SR PA Speaker Passive Version of SRM350
- (1) Rockville RPA12 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp
- (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cable 100% Copper
- (1) Pair of Rockville Tripod DJ PA Speaker Stands + Carrying Case Black RVSS2
Authorized Mackie Dealer!
Description of C200:
DESIGNED AND TUNED BY EAW
The new C Series Passive Loudspeakers represent Mackie's first lightweight passive speakers designed and tuned exclusively by the Eastern Acoustic Works (EAW) loudspeaker engineering team--the same folks responsible for designing loudspeaker systems for the Super Bowl, the Olympics and the Vatican. And although loudspeakers for these mega-systems cost exponentially more than the humble C200, some of the same concepts applied, namely: designing custom 10" LF drivers with a frequency range from 59 Hz – 3000 Hz and a 2" voice coil that can take a pounding. And a 1.4" High-Frequency titanium Driver and Horn providing a wide, controlled dispersion pattern and precise reproduction of the critical 1000 Hz – 20,000 Hz upper mid-range and high frequencies.
CROSSOVERS TUNED TO PERFECTION
Tuning a crossover (i.e. voicing a system), involves dozens of critical decisions that many manufacturers overlook. In the end, it is all about balancing the design so that you get the best subjective results from the speaker while maintaining a good technical implementation. The crossover in the C Series is a unique Low Impedance Compensated Crossover (LICC) design with an asymmetrical slope. With EQ and crossover points meticulously chosen so that beamwidth patterns match in both drivers, C Series loudspeakers offer natural sound at all volume levels. Read more.
ULTRA-WIDE DISPERSION
A loudspeaker's dispersion characteristic shouldn't be lame just because its compact in size. We know that venues like coffee houses and small theatre / rec rooms can be hard to cover. Owners usually have to make do with odd shaped rooms and fixtures placed wherever they fit. The C200's high-frequency compression driver is mounted on an acoustically non-resonant exponential waveguide, providing a wide, controlled dispersion pattern and precise reproduction of the critical upper mid-range and high frequencies. The result is an unbelievably smooth off-axis response that allows everyone in the audience to experience the same high-resolution audio no matter where they are seated.
THINKING INSIDE THE BOX
Anyone with a factory can build a box and stick some speakers in it (and that's just what many do). But low-frequency transducers in square boxes can create resonances that reflect off the rear wall and pass through the woofer cone out of phase, and ready to mess up your sound. The C200 enclosure is an asymmetrical monocoque design with no parallel surfaces, causing mid and high frequency resonances to be reflected at angles into internal damping materials, instead of interfering with the woofer doing its thing.
BUILT FOR SERIOUS ABUSE
Designed for use with existing speakers and power amps (and optimized for use with the Mackie PPM Series), the C200 loudspeakers are passive versions of our industry-standard SRM350 portable active loudspeakers. These speakers' injection-molded composite chassis is built for the rigors of the road. And they shrug off impacts that would turn those cheap-o, fuzz covered wood box speakers into toothpicks.
MAKES A WONDERFUL FLOOR MONITOR TOO!
Floor Monitor A good floor monitor plays loudly without generating feedback through vocal microphones. A poor floor monitor, on the other hand, will generate feedback just about the time you turn it up to a useable level. Floor monitor feedback is often caused by uneven frequency response and dispersion; some frequencies arrive at the microphone much louder than others. These "spikes" are what trigger feedback as the floor monitor volume is increased. The C200 has incredibly smooth, spike-free response and dispersion over a wide range of treble frequencies. So you can increase its volume without boosting those nasty, feedback-inducing spikes. Without extensive tuning, no passive speaker or specialized floor wedge in this class can even come close.
Features:
- Mackie C200 Passive 10" 2-Way Passive 2-Way loudspeaker
- Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer
- Wide, even dispersion pattern means everyone in the audience hears great sound
- Asymmetrical cabinet design for best acoustical response
- Integrated low-impedance compensated crossover and transducer protection
- Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
- 500W peak power handling at 8 ohms
- Three setup configurations: pole mount, flyable and wedge
Details:
- Frequency Response (–3 dB): 89Hz – 20kHz
- Frequency Range (–10 dB): 59Hz – 22kHz
- Maximum SPL Long-term @ 1m: 118dB
- Crossover Frequency: 1800Hz
- AUDIO:: Input Type: Speakon®-style 1/4-inch TS phone jack
- Input Impedance: 8 ohms
- Power Handling: (RMS) 200 watts, (Peak) 500 watts
Advantages of purchasing from an authorized seller:
- Best prices - We sell all Mackie Products at the lowest price as possible.
- Full Factory Warranty
- Detailed information of all products
- Lifetime Customer Service by Mackie Product Experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Mackie from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
How to Set Up Your RPA12, RPA14, and RPA16:
Video of RPA12:
Power Ratings:
- RMS Power Output:
- Stereo 8 Ohm: 2 x 500W
- Stereo 4 Ohm: 2 x 700W
- Bridged 8 Ohm: 1 x 1400W
- Peak Power Output:
- Stereo 8 Ohm: 2 x 2000W Max
- Stereo 4 Ohm: 2 x 2500W Max
- Bridged 8 Ohm: 1 x 5000W Max
- Input Terminals:
- Combo jack (XLR and ¼”) A & B inputs
- Output Terminals:
- Banana binding post speaker output
- Speakon output
- XLR output to connect another amplifier or powered sub
- Rockville RPA12 5000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
- LCD displays volume in dB per channel and operating temperature
- 2U rack space
- Built in limiter protects your speakers from distortion and clipping
- Bridged mode allows you to combine both channels power into one channel for use with a subwoofer
- Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
- Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration
- Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)
- Channel A & B Clipping Led Indicators
- Channel A & B Separate Level Controls
- Power, signal, clipping, and protection LED indicators on front of amp
- Heavy duty rack mount ears with handles
- Built-in variable high velocity quiet cooling fans
- Maximum headroom for 4-ohm and 8-ohm Speakers
- Level controls for precise setting and matching of sensitivity
- Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
- User serviceable fuse (15A, 250V)
- Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz
- THD + Noise @ 1Khz full power: <0.03%
- Input Impedance: 10K Ohm Balanced
- Input signal voltage: 660mV – 1.5V
- Input sensitivity: 0.7v
- Damping factor: ( 100Hz, 10w, 4 ohms): 40.8
- Damping factor: (1Khz @ 8 ohm): >400:1
- Effective damping factor (100Hz, 10w, 4 Ohms) 1.08
- Output impedance at speaker terminals: 0.09803 Ohms
- Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.11%
- Signal to Noise Ratio: > 100dB
- IMD 60Hz & 1kHz, 4:1: <0.04%
- SLEW RATE (input filter limited) : 40v/uS
- Power Requirements: 120V / 50-60Hz
- Weight: 26.5 lbs
- Dimensions: 19.09 x 16.93 x 3.35 inch
Video of RCSS1425:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable
- 100% Copper Conductors for Lower Resistance
- Black PVC Jacket for Both Durability and Flexibility
- Intended for High-Current Applications Only, Not Line-Level Signals
- Length: 25 Ft
- Gauge: 14
All About Your RVSS2:
How to Set Up Your PA Speaker Stands:
Description:
This heavy-duty universal stand can be used as a Speaker Stand or a Lighting Stand! It's sturdy steel construction and custom carrying case add to the quality and support this stand gives. The sturdy and expandable long tripod legs ensure that your speakers will be stable in any environment.
Includes:
- (2) Tripod Speaker Stands
Features:
- Adjustable Height
- Steel Construction
- Black Color
- Weight Capacity: 132 lbs
- Adjustable Height Range: 47-79 inches
- Base spread: 0-23 inches
- Tube Diameter: 1.38 inches
- Leg Diameter: 1.38 inches
The Rockville Difference:
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 year warranty, though it is unlikely that you will need to use the warranty.Great features and great quality make Rockville a great choice.
3 YEAR
- UPC:
- 613815677727
