Package Includes:
- (2) MTX 15" Subwoofer DVC Car Audio Subs
- (1) Rockville RDV15 Dual 15" Vented Subwoofer Enclosure Sub Box 2.4 CU FT
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Authorized MTX Audio Dealer!
Description for MTX Subs:
For over 10 years, the MTX 95 name has been synonymous with unmatched SPL output and legendary performance. The new 95 builds on that legacy with new technologies that take this Subwoofer to levels never before achieved. This subwoofer is designed to produce bass, plain and simple.
The Next Level
It is ideal for competitors looking to take their systems to the next level,
for those wanting the best sounding subwoofer available for their primo ride,
and for everyday enthusiasts that want a "live concert" happening in their cars
instead of that boring stock audio experience. This 15" model features a dual 2
Ohm voice coil configuration and is capable of handling 1500W RMS power.
The New, Unmatched 95 Series
This is not some off the shelf part added to make the 95 "new and improved".
The new 95 series has been under development for over two years so that this new
version would live up to the name it proudly wears. MTX engineers went back to
the drawing board to make the 95 Series bigger and better than the now famous
9500 version. MTX 95 Series Car Superwoofer This meant building the sub to
handle more power with better materials to provide superior accuracy and
cooling, while at the same time improving SPL output and sound quality from our
already high standards.
95 Series Rugged Precision
The 95 series uses a new cast aluminum basket that delivers exceptional
strength in containing the oversized magnet and subwoofer motor structure as
well as reducing resonance improving overall sound quality. The new Inverted
Apex Surround replaces the older style high roll surround. This new surround
design increases effective surface area of the cone by using half the width of
the old style surround without sacrificing any excursion. In fact the new 95 has
an Xmax of 1.25". Couple that incredible excursion with increased surface
diameter and the result is exponentially increased SPL output.
A glass fiber cone which offers excellent stiffness to weight ratio is used to
lower weght and increase sensitivity creating higher SPL using lower power. Each
unit features a progressive layered spider that helps ensure linear movement of
the subwoofer thereby reducing distortion. The spider also protects the
integrated tinsel leads and because of its construction requires no break in
period meaning the subwoofer can handle full power as soon as it is installed.
The voice coil has a 4" diameter and utilizes high temperature aluminum wire
designed to withstand high current over long periods of time ensuring the 95 is
ready to play at all times.
A three layer thermal management design incorporates multiple means of cooling the voice coil so that it plays distortion free even at high output. Spider Plateau Venting is a mechanical cooling process that circulates hot air for cool air at the voice coil as the subwoofer continuously cycles. An integrated voice coil heatsink helps reduce voice coil temperature, dissipating it through its mass and out away from the voice coil. Finally an integrated t-yoke heat sink on the back-plate absorbs heat from the voice coil and radiates it to the back of the subwoofer away from the voice coil.
Features:
- MTX 9515-22 15" 3000 Watt Peak/1500 Watt RMS 2-Ohm Car Subwoofer
- RMS Power Handling: 1500 Watts
- Peak Power Handling: 3000 Watts
- Recommended Amp Power: 750-1500 Watts RMS
- Impedance: Dual 2 Ohms
- Frequency Response: 17Hz - 100Hz
- Sensitivity: 84.9 dB
- Voice Coil: 4" inches (Dual)
- Mounting Depth: 10.25" inches
- Cut Out Diameter: 13.875"
- Volume Displacement: 173.7 cu in
- Xmax: 1.25" inches
- Sealed Enclosure Net Volume: 2.0 cu ft.
- Vented Enclosure Net Volume: 2.4 - 3.4 cu ft.
- Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL While Allowing for an Amazing 1.25" XMAX
- Cast Aluminum Basket: Reduces Resonance for Improved Sound Quality
- Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
- Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
- 3-Layer Thermal Management: Super-cooled for Continuous High Output without Distortion
- High Efficiency Glass Fiber Cone: Optimum Stiffness-to-Weight Ratio for Maximum Output
Features:
- Rockville RDV15 Dual 15" 2.41 Cu. Ft. Ported/Vented Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality
- additives needed to maximize the performance of any sound system.
- Tuning frequency: 41Hz
Enclosure Measurements:
- Type of Enclosure: Vented
- Enclosure Sub Size: Dual 15"
- Dimensions in Inches: 38" L x 18" W x 16.25 H"
- Top and Bottom Depth: 18"
- Mounting Depth: up to 16.5" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.2 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.41 Cubic Feet
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815843184
