Package Includes:
- (2) MTX 15" Competition Subwoofers
- (1) Rockville RDV15 Dual 15" Vented Subwoofer Enclosure Sub Box 2.4 CU FT
- (1) MTX XTHUNDER1500.1 1500W RMS Mono Amplifier Class D Car Stereo Amp+Bass Remote
- (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Authorized MTX Audio Dealer!
Description for MTX Subs:
Our 75 Series SuperWoofer has been known for being extremely reliable while it rocks like nobody's business...one of the best in the market. We stepped it up a few notches and have now brought the 75 Series back. Just like the 95 Series, the 75 Series is a "GAME CHANGER" in the SPL world. And sound quality is incomparable, exceeded by only the MTX 95 Series. If you compete and want a SuperWoofer that's not only affordable, but reliable, and has been engineered by some of the best in the manufacturing world then get ready to... "PUT SOME THUNDER IN YOUR DOME
The 7515-44
This 7515-44 is a 15 inch diameter, dual voice coil, 4 ohm subwoofer built
on the MTX tradition of getting more than expected.
The MTX Inverted Apex Surround
This super Car Audio Subwoofer features an Inverted Apex Surround that
increases surface area and Xmax allowing for increased volume displacement and
higher SPL as well as a progressive, layered spider that eliminates break in
time and lowers distortion resulting in improved sound quality. This subwoofer
has a dual layer thermal management system that incorporates Spider Plateau
Venting, a mechanical cooling process that targets cool air at the voice coil,
and an integrated t-yoke heat sink that helps eliminate excess temperature for
long term performance. The glass fiber cone offers excellent stiffness to weight
ratio providing outstanding sensitivity.
Features:
- MTX 7515-44 15" 1500 Watt Peak/750 Watt RMS 4-Ohm Car Subwoofer
- RMS Power Handling: 750 Watts
- Peak Power Handling: 1500 Watts
- Recommended Amp Power: 375-750 Watts RMS
- Impedance: Dual 4 Ohms
- Frequency Response: 20Hz - 130Hz
- Sensitivity: 87.85 dB
- Voice Coil: 2.5" inches (Dual)
- Magnet Weight: 119 oz.
- Mounting Depth: 8.375" inches
- Cut Out Diameter: 13.875"
- Volume Displacement: 91.66 cu in
- Sealed Enclosure Net Volume: 1.5 cu ft.
- Vented Enclosure Net Volume: 2.48 cu ft.
- Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
- Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
- Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
- Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
- Cast Aluminum Basket: Reduces Resonance for Improved Sound Quality
Description of XTHUNDER1500.1:
Extreme Power
Continuing the Legacy that MTX Audio started almost 20 years ago with
the development of the Thunder amplifier series, we introduce the next
generation – XTHUNDER. These amplifiers are designed to deliver extreme
power to the most demanding speaker system designs and are capable of
driving subwoofers and full range speakers alike. The XTHUNDER1500.1
mono block amplifier will power large subwoofers in multiple wiring
combinations with distortion-free performance, easily handling the abuse
of long hours of extreme play.
Built to Drive BIG Sub Systems
Capable of delivering 1500W RMS power into a 1O load, the XTHUNDER1500.1 is
ideally suited to power MTX SuperWoofers and large, multi-woofer systems. This
is made possible by using high grade materials and a never wavering dedication
to precision workmanship. This is what allows the XTHUNDER Series to deliver
exceptional sound quality and performance.
What's Under the Hood?
We start by using a highly efficient class D amplifier topology to maximize
electrical power efficiency while ensuring total thermal management, even under
extreme use. This is all built on a dual sided circuit board with oversized
copper traces that maximize electrical flow and minimize power loss before it
gets to your speakers. Components are installed using surface mount technology
making the circuit incredibly durable and vibration resistant allowing them to
survive even when used in big bass systems.
Additional heat management is handled by the top cover which functions as a
large surface area heat sink. This effectively dissipates built-up heat so the
amplifier runs cooler and can play louder, longer. The chassis also includes
removable side covers that create a stealth look when installed, but also allow
for easy access to connections and settings after mounting.
Of course, the XTHUNDER1500.1 isn’t all power and no finesse. It is loaded with
features that enable full customization to ensure the best possible sound
quality without distortion. Using the built-in low pass filter, subsonic filter,
and bass boost you are able to get exactly the sound you want from your
subwoofers every time.
Features:
- MTX XTHUNDER1500.1 1500 Watt RMS Class D Mono Car Amplifier and Bass Remote
- RMS Power Output @ 4 Ohms: 600 Watts
- RMS Power Output @ 2 Ohms: 900 Watts
- RMS Power Output @ 1 Ohm: 1500 Watts
- Signal to Noise Ratio: >60dB
- THD: <0.2%
- Frequency Response: 10Hz - 250Hz
- Maximum Input Signal: 5V
- Max Sensitivity: 100mV
- Low Pass Filter: Variable, 40Hz - 250Hz, 12dB/Oct
- Subsonic Filter: 10Hz - 50Hz, 12dB/Oct, Variable
- Bass Boost: 18dB @ 45 Hz
- Class D Topology: Ensures Excellent Thermal Efficiency
- Low Profile Design: Allows for Installation Anywhere
- Cast Aluminum Top Cover: Efficiently Dissipates Heat
- Variable Butterworth Crossover: A 12dB/Oct crossover that allows you to set the frequency your speakers will play down or up to
- Variable Bass Boost: Allows you to boost your bass output by up to 18dB @45Hz
- Variable Subsonic Filter: A variable low frequency, high pass filter designed to block potentially damaging bass frequencies
- Triple Protection Circuitry: Thermal, DC Offset, and Short Circuit Protection circuitry ensures the amplifier will protect itself in the event of a problem
- Product Dimensions (L x H x D): 14.2" x 2.03" x 8.9" inches
Videos of RWK0CU:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more copper than 100 %. So the only way a cable would out-perform this one is if it were being advertised as a 0 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 0 gauge cable? Then look no further than the Rockville True-Spec RWK0-CU 0 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency.
The power and ground cables aptly named “Mega Power Cable” are a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.
The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 250-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 12 gauge speaker cable included in the 0 gauge kit can handle over 3000 watts of power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.
Amplifier Kit Key Features:
- 0 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 3000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 4704
- BC-5W2 Compliant
- 17 ft. Frosted Blue 0 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 0 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 12 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One ANL Fuse Holder with 250 amp ANL fuse
- One 1/2" black rubber firewall grommet
- Two 0 gauge spade terminals
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 0 gauge ring terminal
- Ten 6" black zip ties
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
Features:
- Rockville RDV15 Dual 15" 2.41 Cu. Ft. Ported/Vented Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality
- additives needed to maximize the performance of any sound system.
- Tuning frequency: 41Hz
Enclosure Measurements:
- Type of Enclosure: Vented
- Enclosure Sub Size: Dual 15"
- Dimensions in Inches: 38" L x 18" W x 16.25 H"
- Top and Bottom Depth: 18"
- Mounting Depth: up to 16.5" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.2 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.41 Cubic Feet
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815842583
