Package Includes:

• (2) MTX 7512-44 12" 3000w Peak/1500w RMS Competition Subwoofer DVC 4ohm Car Audio Sub
• (1) Hifonics BXX2000.1D 2000 Watt RMS Mono Amplifier Class D Brutus Car Audio Amp
• (1) Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/ RCA's
• (1) Rockville RD12 Dual 12” 1.25 cu.ft. 3/4” MDF Sealed Subwoofer Enclosure Sub Box
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

Authorized MTX Audio Dealer!

Description of 7512-44:

Our 75 Series SuperWoofer has been known for being extremely reliable while it rocks like nobody's business...one of the best in the market. We stepped it up a few notches and have now brought the 75 Series back. Just like the 95 Series, the 75 Series is a "GAME CHANGER" in the SPL world. And sound quality is incomparable, exceeded by only the MTX 95 Series. If you compete and want a SuperWoofer that's not only affordable, but reliable, and has been engineered by some of the best in the manufacturing world then get ready to... "PUT SOME THUNDER IN YOUR DOME

The 7512-44
This 7512-44 is a 12 inch diameter, dual voice coil, 4 ohm subwoofer built on the MTX tradition of getting more than expected.

The MTX Inverted Apex Surround
This super Car Audio Subwoofer features an Inverted Apex Surround that increases surface area and Xmax allowing for increased volume displacement and higher SPL as well as a progressive, layered spider that eliminates break in time and lowers distortion resulting in improved sound quality. This subwoofer has a dual layer thermal management system that incorporates Spider Plateau Venting, a mechanical cooling process that targets cool air at the voice coil, and an integrated t-yoke heat sink that helps eliminate excess temperature for long term performance. The glass fiber cone offers excellent stiffness to weight ratio providing outstanding sensitivity.

Features:

• MTX 7512-44 12" 1500 Watt Peak/750 Watt RMS 4-Ohm Car Subwoofer
• RMS Power Handling: 750 Watts
• Peak Power Handling: 1500 Watts
• Recommended Amp Power: 375-750 Watts RMS
• Impedance: Dual 4 Ohms
• Frequency Response: 22Hz - 140Hz
• Sensitivity: 85.44 dB
• Voice Coil: 2.5" inches (Dual)
• Magnet Weight: 103.4 oz.
• Mounting Depth: 7.437" inches
• Cut Out Diameter: 11.125"
• Volume Displacement: 57.49 cu in
• Sealed Enclosure Net Volume: 1.25 cu ft.
• Vented Enclosure Net Volume: 2.32 cu ft.
• Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
• Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
• Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
• Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
• Cast Aluminum Basket: Reduces Resonance for Improved Sound Quality

Authorized Hifonics Dealer!

Description:

The BXX2000.1D is a 2000 watt mono amplifier featuring Super Class D™ technology with an NGSD digital chip to provide you with an extremely efficient, low temperature, high amplification system that others only dream about. The rock solid Ultra-Fi™ MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the music. All Mono and five channel amplifiers include a bass remote to put the bass control at arm’s length. The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.

Low Noise Pre-Amplifier Circuitry
Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion

RCA Inputs
Nickel-plated RCA jacks create the most efficient audio connection and resist corrosion

Operation Mode
Mono Only

Crossover Type
Variable electronic crossovers allow for complete control of the sound

Electronic Equalizer
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.

Class / Topology
Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs

Output Device Technology
Pro-Fi

Heat Sink
Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi™ output devices

Power Supply
Simpatico coil design. The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices

Output Connections
High temperature impact resistant nickel plated connectors with allen head set screws which allow for secure termination of wire and creates an erosion resistant seal

Connection Type
Molded and Angled. Secure connection for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile

LED System Protection Circuitry Diagnostics
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel

Bass Remote Included
Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.

Phase Adjustment
Phase 0-180°

Features:

• Hifonics Brutus BXX2000.1D Class D 2000 Watt RMS Mono Car Amplifier
• Power @ 1 Ohms: 1 x 2000 Watts
• Power @ 2 Ohms: 1 x 1000 Watts
• Power @ 4 Ohms: 1 x 500 Watts
• Class: Super D Class
• Variable Voltage: 9V - 0.2V
• Signal to Noise: >95dB
• Frequency Response: 10Hz - 250Hz
• Crossover: Electronic
• Variable Low Pass Crossover 12dB Per Octave: 30Hz - 250Hz
• Bass Boost: 0 - 10dB
• Subsonic Filter: 15Hz - 35Hz
• Total Channels: 1
• Audio Inputs: RCA
• Audio Outputs: RCA
• Power Terminal 12V/GND: 0 AWG
• Speaker Terminal Wire Gauge: 10 AWG
• Fusing: 200A
• Total Harmonic Distortion (THD): <0.10%

The RD12 dual sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RD12 Dual 12" Sealed Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 13.25” x 13.25” x 32”
• Top and Bottom Depth: 14"
• Mounting Depth: up to 12" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.55 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.25 Cubic Feet

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

Video of RWK01:

Description:

The Rockville RWK01 0 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is lost per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires have a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

Features:

• Rockville RWK01 0 AWG (American Wire Gauge) Complete Car Amp Installation Wire Kit
• 17’ – 0 Gauge Translucent Blue SuperFlex Power Cable
• 3’ – 0 Gauge Translucent Black SuperFlex Ground Cable
• Gold Plated ANL Heat Resistance Fuse Holder
• 200 Amp ANL Gold Plated Fuse
• 1 – 17’ High Grade Twisted Pair of RCA Interconnects
• 25’ Translucent Blue Speaker Wire
• 7’ Split Loom Tubing
• 17’ Amplifier Remote Turn On Cable
• Wire Ties and Ring Terminals, and all other accessories you need for a clean installation
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F