- (2) MTX 5510-22 10" 1600 Watt Peak/800 Watt RMS DVC 2-ohm Car Audio Subwoofer Sub
- (1) Rockville Dual 10” 1.0 cu.ft. 3/4" MDF Sealed Subwoofer Enclosure Sub Box
- (1) Kicker 43CXA6001 CXA600.1 600 Watt RMS Mono Class D Car Audio Amplifier Amp
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Video of MTX Subs:
Authorized MTX Audio Dealer!
Description:
High SPL Subwoofers
55 Series Subwoofers are high SPL subwoofers that deliver the most bass for
your buck. Implementing many of the same features found on our 75 & 95 Series
SuperWoofers, the 55 Series can rock hard and loud for extended periods of time,
while maintaining accurate and clean bass throughout the party. You will be
impressed.
The 5510-22
The 5510-22 is a 10″ dual voice coil, 400 watt, 2 ohm subwoofer built on the
MTX tradition of getting more than expected. The 55 Series subs are often used
in applications where bass levels are the most important factor. These
subwoofers are designed to move air and go boom! They are true monsters of bass
and are a great choice for anyone that really wants to be heard.
55 Series Spider Plateau Venting
This subwoofer also incorporates Spider Plateau Venting which is a
mechanical cooling process that targets cool air at the voice coil and a radial
ribbed t-yoke that acts as a heat sink effectively managing the subwoofer
temperature for long term rocking performance.
The MTX Inverted Apex Surround
This subwoofer features the MTX Inverted Apex Surround. This is a departure
from a traditional half roll surround. The Inverted Apex is narrower thereby
increasing the surface diameter of the subwoofer cone enabling it to displace
more air and generate higher SPL. The 55's are designed with a progressive
suspension that lowers distortion resulting in improved sound quality even at
high volume.
Features:
- MTX 5510-22 10" 800 Watt Peak/400 Watt RMS 2-Ohm Car Subwoofer
- RMS Power Handling: 400 Watts
- Peak Power Handling: 800 Watts
- Recommended Amp Power: 200-400 Watts RMS
- Impedance: Dual 2 Ohms
- Frequency Response: 29Hz - 130Hz
- Sensitivity: 83.1 dB
- Voice Coil: 2" inches (Dual)
- Magnet Weight: 56 oz.
- Mounting Depth: 5.625" inches
- Cut Out Diameter: 9.188"
- Volume Displacement: 35.0 cu in
- Sealed Enclosure Net Volume: 0.75 cu ft.
- Vented Enclosure Net Volume: 2.0 cu ft.
- Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
- Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
- Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
- Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
Click here for the Installation Sheet
Description of 43CXA6001:
The CX 600.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class D power plant and FIT™ (Failsafe Integration Technology) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. Use the full range outputs to expand your system with other bass amps, or a full range amp to complete your system.
CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. This CX amplifier delivers as much as 600 watts into one channel.
Features:
- Kicker 43CXA6001 600 Watt RMS Class D Car Amplifier
- 2-Ohm Stable Monoblock Amplifier
- RMS Power Rating:
.....4 ohms: 300 watts x 1 chan.
.....2 ohms: 600 watts x 1 chan.
- Total power output: 1200 watts
- Pulse Width Modulated MOSFET power supply
- Kicker CXARC wired remote bass level control available and sold separately
- LED power (green) and protect (red) indicators
- Soft start turn-on
- Mono channel operation
- Speaker-level (high-level) inputs via RCA (requires Kicker KISL, available and sold separately)
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- 4-gauge power and ground leads and an 80-amp fuse recommended (Not include in this amplifier)
- Input sensitivity: Low level: 125mV-5V ; High level: 250mV-10V
- Frequency Response: 25 - 200Hz
- Signal to Noise Ration: >95dB
- Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
- Fixed Subsonic Filter @ 25hz, 24db/octave
- Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Description for Rockville Enclosure:
The RD10 dual sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RD10 Dual 10" Sealed Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Enclosure Measurements:
- Type of Enclosure: Sealed
- Enclosure Sub Size: Dual 10"
- Dimensions in Inches: 28" L x 13" W x 13 H"
- Top and Bottom Depth: 10"
- Mounting Depth: up to 10" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.3 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.0 Cubic Feet
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815852391
