Package Includes:

• (2) Pair Kicker 51KM614FL 6.5" Thin Mount 60w Marine Boat Speakers w/RGB LED KM614FL
  
• (2) Pair Kicker 51KM614FL 6.5" Thin Mount 60w Marine Boat Speakers w/RGB LED KM614FL
  
• (1) Rockville DBM45 4-Channel 2000w Peak/500w RMS Marine/Boat Amplifier
  
• (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
  
• (1) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin

---

​​Description:

Using all the protection that KICKER Real Marine™ can provide, KM614FL Coaxial Speakers come with a thin-mount grille design for a non-intrusive installation and more subtle look.

Features:

• Thin-Mount Grille Design
  
• Comes with Two Sets of Grilles – an OE-style white pair and a silver pair with open-hole tweeters
  
• Spectacular Highs and Smooth, Impactful Midrange
  
• ASTM-Tested for UV and Salt/Fog Exposure
  
• KICKER Real Marine™ with Splash-and-Spray, Sealed Components and Rust-proof Hardware
  
• Multi-Color RGB Lighting
  
• Select Colors and Modes with the KICKER KMLC LED Remote Control (sold separately)
  
• This KM 6.5-inch Speaker works best with 65 watts of recommended power.
  

Specifications:

• Woofer(in,mm): 6-1/2, 165
  
• Tweeter(in,mm): 1/2, 13
  
• Tweeter Dome Material: PEI
  
• Rated Impedance(Ω): 4
  
• Peak Power (watts, per ANSI/CTA-2031-A): 130
  
• Recommended Amplifier Power (watts RMS): 60
  
• Sensitivity(1W,1m): 90
  
• Frequency Response(Hz): 35-21k
  
• Mounting Hole Diameter(in,mm): 5-1/4, 132
  
• Mounting Depth(in,mm): 2-13/16, 132
  
• Grilles: 2 pair (OE-style white/silver with open tweeter)

---

Description:

Using all the protection that KICKER Real Marine™ can provide, KM614FL Coaxial Speakers come with a thin-mount grille design for a non-intrusive installation and more subtle look.

Features:

• Thin-Mount Grille Design
  
• Comes with Two Sets of Grilles – an OE-style white pair and a silver pair with open-hole tweeters
  
• Spectacular Highs and Smooth, Impactful Midrange
  
• ASTM-Tested for UV and Salt/Fog Exposure
  
• KICKER Real Marine™ with Splash-and-Spray, Sealed Components and Rust-proof Hardware
  
• Multi-Color RGB Lighting
  
• Select Colors and Modes with the KICKER KMLC LED Remote Control (sold separately)
  
• This KM 6.5-inch Speaker works best with 65 watts of recommended power.
  

Specifications:

• Woofer(in,mm): 6-1/2, 165
  
• Tweeter(in,mm): 1/2, 13
  
• Tweeter Dome Material: PEI
  
• Rated Impedance(Ω): 4
  
• Peak Power (watts, per ANSI/CTA-2031-A): 130
  
• Recommended Amplifier Power (watts RMS): 60
  
• Sensitivity(1W,1m): 90
  
• Frequency Response(Hz): 35-21k
  
• Mounting Hole Diameter(in,mm): 5-1/4, 132
  
• Mounting Depth(in,mm): 2-13/16, 132
  
• Grilles: 2 pair (OE-style white/silver with open tweeter)

---

How To Install a Marine Amplifier onto Your Boat:

Video of DBM45:

What's in The Box:

• DBM45 Amplifier
• PA Microphone
• Birth sheet with tested power
• Mounting Screws
• Warranty Card
• Owner’s Manual

Description:

The all new dB marine series of amplifiers gives you the best of both worlds! We took the sound of our best-selling series of dB car amps and we added top of the line marine grade parts so that they will last forever and withstand even the harshest conditions on the water.
We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, internal mounting screws and hardware of the amp are made of stainless steel and are rustproof. Even after many years of use the amp will be rust free and operate like new!

The DBM45 is a 4-Channel high power amplifier with 2,000 watts peak output and 500 watts Dyno Certified power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that our crossover supports low pass, high pass, bandpass, and subsonic. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, and midrange speakers. In high pass mode we allow you to filter out frequencies between 15Hz - 4K Hz. In full mode you will not be filtering any frequencies. The really cool part is in low pass mode you can use the high pass and low pass mode. So for example you can set the low pass mode to 50 hz, and then you can set the high pass to 15 Hz. In this case you would be playing frequencies in the range of 15-50 Hz on this channel. This would be an example of using the subsonic filter. Another option you have is for midrange speakers, you can use our low pass filter and set it really high. Lets say to 150 hz. And then you can set the high pass to 3K hz and your midrange speakers will only play that frequency range. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire.

The DBM45 is protected by a fully IC controlled circuit which includes mute, delay, soft start technology so that the amplifier will turn on safely every time and protect your speakers from popping.

We are so confident in your satisfaction with this amplifier that we will offer you a 90 day money back guarantee. If this amp does not perform as well as you expected, we will send you a pre-paid shipping label and give you your money back. This means that, if for any reason you want to return the amplifier for a full refund within 90 days, you can! (Amp must be complete along with the box).

Features:

• Rockville DBM45 4-Channel 2000w Peak/500w Dyno-Certified RMS Marine/Boat Amplifier
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
• 2 Ohm: 125 Watts x 4 Channel
• 4 Ohm: 85 Watts x 4 Channel
• 4 Ohm Bridged: 250 Watts x 2 Channel
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
• 2 Ohm: 500 Watts x 4 Channel
• 4 Ohm: 340 Watts x 4 Channel
• 4 Ohm Bridged: 1000 Watts x 2 Channel
• Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue)
• Waterproof silicone covers for end panels
• Rustproof Aluminum heat sink with white painted finish
• Stainless steel end panels are rustproof
• All screws and mounting hardware are stainless steel and rustproof
• Bottom panel is aluminum and rustproof
• All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers
• All channels on the amplifier are bridgeable
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• Adjustable Subsonic Filter: 15Hz - 40Hz (This filter is on the HPF knob)
• Adjustable Low Pass Filter: 40Hz - 4kHz
• Adjustable Band Pass Filter: 15Hz - 4kHz (use both the HPF and LPF filter)
• Adjustable High Pass (Subsonic) Filter: 15Hz - 4kHz (use both the HPF and LPF filter)
• Fully Adjustable 12dB Bass Equalizer
• 2CH/4CH Input Mode Switch
• Status Mode LED Indicator
• Adjustable Input Level Control
• Mute and Delay Soft Start System
• Minimum THD at Rated Power: <0.05%
• S/N Ratio: >90 dB
• Frequency Response: 10Hz - 50kHz
• Damping Factor: >85 @ 100Hz
• (2) 35 Amp ATC Fuses
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• 8 Volt Preamp Circuitry
• 35 Amp x2 ATC Fuse
• Microphone input and PA microphone included
• Product Dimensions (W x H x L): 9" x 2.4" x 15.1" inches
• Product Weight: 7.7 Lbs

---

Video of RMWK:

Features:

• Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
• 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 25' Blue Remote Wire
• (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 120A Mini-ANL Fuse
• (1) 80A Mini-ANL Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (5) Speaker Cable Terminals
• (1) Washer
• (10) White Cable Ties

---

Description:

Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Features:

• Rockville MRCA25 RCA Interconnect Cable
• 25' Ultra-Flexible PVC Shield
• Twisted Pair
• Premium Audiophile Marine RCA Interconnect Cable
• High Performance Water Proof RCA Plugs
• Tinned Copper Strands for Sonic Purity
• Outstanding Noise Rejection, Accuracy, and Frequency Response