Package Includes:
- (2) Pair KICKER 47KMFC11W 11" Marine Horn Loaded Flat Mount Tower Speakers KMFC11W
- (1) Rockville DBM50 4000 Watt/980w RMS 5 Channel Marine/Boat Amplifier Amp+Mic
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
- (2) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin
- (1) Rockville RGHR-ZA 4 Zone Marine Gauge Hole Receiver Bluetooth App Control+Remote
- (1) Infinity KAPPA 1010M 10" 900 Watt Marine Subwoofer w/ RGB Lighting 2 or 4 Ohm
What's In The Box:
- 2 Loaded enclosures
- 2 Vehicle mounting brackets
- 1 Hardware pack, with anti-seize compound
- 2 Vehicle wiring harness pigtails
- 2 Grille mounted Kicker badges(loose in poly bag)
- 1 CIC or install manual
Description:
KICKER gear is made for marine use. Injection-molded woofer cones are made of UV-treated polypropylene with Santoprene surrounds, providing excellent durability in any weather. Even our enclosures are next level, integrating a UV-resistant inhibitor to prevent fading or discoloring over years of use. All of our HLCD (horn-loaded compression-driver) Systems meet or exceed ASTM standards for humidity and 'UV exposure' and come with mounting hardware forged from rustproof, 316L stainless-steel. Watch the LEDs light up the night in any one of seven colors, or upgrade to 20 colors and 19 lighting modes with the wireless KMLC LED remote controller. This Tower Systems deliver great looks and incredible sound quality, and now you can use them with mounts made for standard, flat factory tower-speaker hardpoints with 2.5-inch bolt spacing and hidden wires. Your tunes are loud and clear, whether you’re in the boat, at the party cove or on the end of a tow rope.
Features:
- Mounts to Flat Factory Tower-Speaker Hardpoints with 2.5-inch Bolt Spacing and Hidden Wires
- Four-Ohm Voice Coil
- High-Frequency Horn Design with Titanium-Dome Compression Drivers
- Stitched Polypropylene Cone with Santoprene Surround
- UV-Resistant Polymer Basket
- 316L Stainless Mounting and Seven Color LED Grilles Hardware Included
- Adjustable Logo on all KMFC, KMTC and KMTE products the logo is manually adjustable to 180 degrees.
Specifications:
- Woofer Size (in, cm): 11, 28
- Horn Loaded Compression Driver (in, cm): 1.4, 3.5
- Dome Material: Titanium
- Impedance: 4 ohms
- Peak Power (watts ANSI/CTA-2031-A): 600 watts
- Recommended Amplifier Power (watts RMS): 150-300
- Sensitivity (1W, 1m): 9393
- Frequency Response (Hz): 20-20k
- LED Lighting: Yes
How To Install a Marine Amplifier onto Your Boat:
DBM50 Product Video:
What's In The Box:
- Amplifier
- PA Microphone
- Bass Remote
- Birth Sheet with tested power
- Owner's Manual
- Mounting Screws
- Warranty
Description:
The all new dBM marine series of amplifiers gives you the best of both worlds! We took the sound of our best-selling series of dB car amps and we added top of the line marine grade parts so that they will last even under the harshest conditions on the water.
We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. We then added waterproof silicone covers over the terminals so that water can never get into the amp. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, internal mounting screws and hardware of the amp are made of stainless steel and are rustproof. Even after many years of use the amp will be rust free and operate like new!
The DBM50 is a 5 channel high power amplifier with 4,000 watts peak output and 980 watts Dyno Certified RMS power. Here at Rockville we offer the best value in marine audio. We therefore want to make it easy for you to compare our products to any other brand. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
This is a 5 channel amplifier that will power your entire marine system. The amplifier has 4 channels with full range signal, and a 5th mono channel dedicated to your subwoofers. Our crossover supports low pass, high pass, bandpass, and subsonic. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, and midrange speakers. What is really cool is that we allow you to set the high and low pass on the same channel so you can really fine tune your speakers.
Features:
- Rockville DBM50 4000w Peak/980w Dyno-Certified RMS 5 Channel Marine/Boat Amplifier Amp+Mic
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N
- 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2 Ohm 480 Watts x 4 + 2000 Watts x 1
- 4 Ohm: 320 Watts x 4 + 1200 Watts x 1
- Channels 1-4 are Class "AB" and Channel 5 is class "D"
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: (CH3-CH4) 40Hz - 4KHz /(CH5) 50Hz - 250Hz
- High Pass Filter: 15Hz - 4KHz
- Subsonic Filter: 15Hz - 50Hz
- Remote Dashboard Subwoofer Control
- Includes PA microphone
- Painted Conformal Coating PCB Board is protected from moisture (Uses 2577 Waterproof Glue)
- Waterproof silicone covers for end panels
- Rustproof Aluminum heat sink
- Stainless steel end panels are rustproof
- All screws and mounting hardware are stainless steel and rustproof
- Bottom panel is aluminum and rustproof
- High-Speed MOSFET Power Supply
- Rugged switching MOSFETs for Class D in CH5
- Under Voltage Protection at 10V
- Over Voltage Protection at 16V
- Full IC-Controlled Protection Circuitry
- Fully Adjustable 12dB Bass Equalizer
- Mute and Delay Soft Start System
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- Minimum THD at Rated Power: < 0.05%
- S / N Ratio: >90dB
- Frequency Response: 15-35KHz
- Damping Factor: >100@ 100Hz
- 40 Amp x 3 ATC Fuses
- Product Dimensions: (L x W x H) 18.6" × 9" × 2.4"
Video of RMWK:
Features:
- Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
- 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 25' Blue Remote Wire
- (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 120A Mini-ANL Fuse
- (1) 80A Mini-ANL Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (5) Speaker Cable Terminals
- (1) Washer
- (10) White Cable Ties
Description:
Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.
Features:
- Rockville MRCA25 RCA Interconnect Cable
- 25' Ultra-Flexible PVC Shield
- Twisted Pair
- Premium Audiophile Marine RCA Interconnect Cable
- High Performance Water Proof RCA Plugs
- Tinned Copper Strands for Sonic Purity
- Outstanding Noise Rejection, Accuracy, and Frequency Response
All About Your RGHR-ZA:
How To Set Up Your RGHR-ZA:
The Wires, Inputs, and Outputs Explained:
The Zones on Your RGHR-ZA Explained:
What's In The Box:
- Marine Digital Media Receiver
- Wired Remote with zone controls
- USB Extension Cable (40 inches)
- Mounting Screws for installation
- Waterproof Wiring Harness for installation
- Owners Manual and Warranty card
Description:
4 Zones!
This marine receiver has 4 zones that each have independent volume control. There is also 3 ways to control each zones volume. You can raise or lower the volume in each zone either through the receiver, the wired remote, or through our iPhone or Android app.
There are 3 zones for full range and a 4th zone for a subwoofer. Here is how it works. Zone 1 is the built in powerful 4 channel amplifier. With the addition of an external amplifier you can use the additional zones as follows: Zone 2 controls a full range set of RCA outputs. Zone 3 controls a second set of full range RCA outputs. Zone 4 controls a 3rd set of RCA outputs that are dedicated for subwoofer(s).
App Control
This receiver has a really nice app available in the App store for both Android and iPhone. The App gives you full control over the volume in any zone as well as the ability to change the song or source, etc. All the commonly used functions are available in the app.
3" TFT display
Our built in 3" TFT display is crystal clear and it makes it easy to navigate your tracks and settings. We also include a rear view camera input as well as an aux A/V input.
Intuitive Screen Display
With the intuitive screen display you can access all your photos, videos and music all in one place. Hold the band button to access photos and videos and songs stored on a USB thumb drive.
Crazy loud!
We used a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.
Latest listening features
The RGHR-ZA gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.
Includes a wired remote!
We include a wired remote inside the box. Most famous brands like to make extra money on the remote, but at Rockville we just include it because we know it will make your experience better. We custom engineered the remote to be able to control basic functions as well as control the volume in each zone!
Features:
- Rockville RGHR-ZA Weather Resistant Gauge-Hole Digital Media Receiver with 4 Zones and App control
- Includes wired remote with the ability to control the volume in each zone
- APP control allows you to download the free app for Android or iPhone and control zone volume, song selection, source selection, and more
- 3" TFT color display makes it easy to navigate
- Built in Bluetooth/USB/AM/FM playback
- Fits into a standard Gauge-Hole (Tachometer) Opening
- Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
- 3 pairs of pre-amp outputs
- 4 zones each with volume control (zone 1 = built in amplifier, zone 2 and 3 are RCA outputs, and zone 4 is the sub output)
- Built in EQ with preset EQ curves (Pop, Classic, Rock, Jazz, Beat, Flat)
- IP66 Waterproof Certification (Tested to withstand the elements)
- USB Input to play back audio files stored on a USB thumb drive or any other USB device
- USB plays video
- RCA A/V input to play back a video source
- Rear camera input
- RCA Aux Input
- AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
- Bluetooth built in to stream audio from any Bluetooth enabled device
- USB Input Charges Your Phone
- Big easy to use buttons
- Back-lit 3 inch TFT display
- IP66 waterproof level
- Meets ASTM B117 and ASTM D4329 standards
- Humiseal coated PCB board for waterproofing and protection from the elements
- Required cutout: 3" (diameter) x 4.96" (depth) x 4.5" (top plate diameter)
- 5.75 inch depth including the top plate
- USB is 500mA and 5V and supports 16GB max
- Specs of the built in amplifier:
- TDA7851L quad bridge power amplifier
- 4 x 72 watts peak @ 2 ohm
- 4 x 48 watts peak @ 4 ohms
- Highly efficient even when running at 2 ohms!
- Low distortion even at top volumes
What's In The Box:
- 1 x 10" (250mm), ea., with integrated grille
- 6 x Screw
- 6 x Speed Clip
- 1 x Spanner
- 1 x Closed Cell Foam Gasket
- 1 x LED Cable
- 1 x Owner's Manual
- 1 x RoHS Sheet
Description:
Infinity's Kappa Marine loudspeakers leverage Infinity's world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity - ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.
Features:
Plus One™ Woofer Cones
Plus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character.
Convertible Design
To increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions.
Perimeter Illumination
Unique and eye-catching RGB illumination can display seven colors out of the box - or an almost unlimited number of colors when connected to an external lighting controller.
SSI (Switch-Selectable Impedance)
New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.)
Mylar Tweeters with Integrated Grilles
Weather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.)
One-piece Polymer basket
The polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection.
High Sensitivity
A high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character.
Voicing of Speakers
Speakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point.
Harman Standard Reliability Testing
Infinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.
Infinity at an Affordable Price
This is Infinity - one of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world - obviously, this is no coincidence. If you know audio, you know Infinity in your car, your home - why not in your boat?
General Specifications:
- Power Handling: 300 watts RMS, 900 watts peak power
- Sensitivity: 89 dB at 2.83 volts
- Frequency Response: 20 - 2kHz
- Voice Coil Diameter: 2 in. (49.5 mm)
- Impedance: 2 and 4-ohms, Switch Selectable Impedance (SSI™)
