- (2) Kicker 45L7R154 15" 1800 Watt L7R Car Subwoofer, Solo-Baric Sub L7R154 DVC 4-ohm
- (1) Hifonics BG-3300.1D BRUTUS Gamma 3300 Watt Mono Car Audio Amplifier Class D Amp
- (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
Authorized Kicker Dealer!
What's In The Box:
- (1) 15" Subwoofer
- (1) Owner's Manual
- (2) Kicker Stickers
Description:
The 15-inch L7R Square Subwoofer moves more air and delivers bigger bass, so you get more bump out of every watt! The engineers at KICKER HQ designed the L7R to give you more bass than a circular sub, without a larger enclosure. Welcome to the world of square sub perfection!
Features:
- KICKER 45L7R154 15" 1800 Watt L7R Car Subwoofer, Solo-Baric Sub 4-Ohm
- RMS Power Handling: 900 Watts
- Peak Power Handling: 1800 Watts
- Dual Four-Ohm Voice Coil
- Wrap Around Gasketing
- Patented Ribbed Corners
- Injection-Molded SoloKon Woofer
- 360-Degree Back Bracing
- UniPlate Back Plate And Pole Piece
- Bumped Back Plate
- Thick Tinsel Leads
- Large Ceramic Magnet
- Steel Basket With Spoke Design
- Nickel Plated Speaker Terminals
- Sensitivity: 88.05 dB
- Impedance: 4-Ohms
- Mounting Depth: 8.38" inches
- Mounting Diameter: 13.75" inches
- Minimum Sealed Box Volume: 1.5 cubic feet
- Maximum Sealed Box Volume: 3.0 cubic feet
- Minimum Vented Box Volume: 3.0 cubic feet
- Maximum Vented Box Volume: 6.0 cubic feet
Description:
Hifonics BRUTUS Gamma Mono subwoofer audio amplifier delivers 3300 watts with Super D Class™ technology that features Ultra-Fi™ MOSFET outputs that are selected for both balance and output power.
Features:
- Low Noise Preamplifier Circuit: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
- RCA Inputs: Nickel-plated RCA jacks create the most effiecient High/Low Level audio connection and resist corrosion.
- Operation Mode: Mono only
- Crossover Type: Variable electronic crossovers allow for complete control of the sound.
- Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.
- Class/Topology: Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs.
- Output Device Technology: Pro-Fi™ Output Device Technology, The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion.
- Heat Sink: Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi™ output devices
- Power Supply: Simpatico Coil Design
The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices. - Output Connections: High temperature impact resistant nickel plated connectors with allen head set screws which allow for secure termination of wire and creates an erosion resistant seal.
- Connection Type: Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile.
- LED System Protection Circuitry Diagnostics: Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel.
- Bass Remote Included: Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.
- Phase Adjustment: "Phase 0-180°, Bass drum attack, snap requires phase between deep frequency subwoofers and upper midbass speakers.
- Strapping: Power Strapping allows the installer to Sync the input signal and output power to double the rated output of a mono amplifier which will drive a single subwoofer or group of subwoofers.Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level (output voltage).CONSULT PROFESSIONAL INSTALLER.
Specifications:
- CEA Standards: CTA-2006B Compliant. CTA stands for Consumer Technology Association and Hifonics has been a member for decades.
- Class: Super D Class™
- Total Channels: 1
- Power @ 1 Ohm (ch x watts): 1 x 3300
- Power @ 2 Ohms (ch x watts): 1 x 1650
- Power @ 4 Ohms (ch x watts): 1 x 825
- Crossover: Variable Electronic 12dB Per Octave
- Variable Low Pass Crossover 12dB per Octave: 30Hz-250Hz
- Tone Control/Parametric EQ: Built-in bass control
- Bass Boost: 0-10dB
- Subsonic Filter: 15Hz-35Hz
- Phase Shift: 0-180 Degrees
- Variable Voltage: .2 to 9V
- Frequency Response: 10Hz-500Hz
- Total Harmonic Distortion (THD): < 0.10%
- Speaker Level Audio Inputs: Yes
- Power Terminal 12v/GND: 2 AWG
- Speaker Terminal Wire Gauge: 12 AWG
- Fusing: External
- Color: Bright Silver Hairline Anodized Finish
- Dimensions: 25.38 x 8 x 10.81 in
- Weight: 51.33 lbs
Proposition 65 Notice:
?WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Videos of RWK0CU:
Description:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more copper than 100 %. So the only way a cable would out-perform this one is if it were being advertised as a 0 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.
Maximum Power!
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 0 gauge cable? Then look no further than the Rockville True-Spec RWK0-CU 0 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency.
The power and ground cables aptly named “Mega Power Cable” are a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.
The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 250-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 12 gauge speaker cable included in the 0 gauge kit can handle over 3000 watts of power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.
Amplifier Kit Key Features:
- 0 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 3000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 4704
- BC-5W2 Compliant
Kit includes:
- 17 ft. Frosted Blue 0 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 0 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 12 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One ANL Fuse Holder with 250 amp ANL fuse
- One 1/2" black rubber firewall grommet
- Two 0 gauge spade terminals
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 0 gauge ring terminal
- Ten 6" black zip ties
- UPC:
- 613817041755
