Package Includes:

• (2) Kicker 12" Car Subwoofers
• (1) Rockville Dual 12" Vented Solo Baric L7S/L7R S12L7 Sub Enclosure Box
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

---

Authorized Kicker Dealer!

 

What's In The Box:

• (1) 12" Subwoofer
• (1) Owner's Manual
• (2) Kicker Stickers

Description of Kicker Subs:

The 12-inch L7R Square Subwoofer moves more air and delivers bigger bass, so you get more bump out of every watt! The engineers at KICKER HQ designed the L7R to give you more bass than a circular sub, without a larger enclosure. Welcome to the world of square sub perfection!

Features:

• KICKER 45L7R122 12" 1200 Watt L7R Car Subwoofer, Solo-Baric 2-Ohm
• RMS Power Handling: 600 Watts
• Peak Power Handling: 1200 Watts
• Frequency Response: 35 Hz - 21 kHz
• Dual Two-Ohm Voice Coil
• Wrap Around Gasketing
• Patented Ribbed Corners
• Injection-Molded SoloKon Woofer
• 360-Degree Back Bracing
• UniPlate Back Plate And Pole Piece
• Bumped Back Plate
• Thick Tinsel Leads
• Large Ceramic Magnet
• Steel Basket With Spoke Design
• Nickel Plated Speaker Terminals
• Sensitivity: 86.7 dB
• Impedance: 2-Ohms
• Mounting Depth: 6.88" inches
• Mounting Diameter: 11.06" inches
• Minimum Sealed Box Volume: 0.88 cubic feet
• Maximum Sealed Box Volume: 2.0 cubic feet
• Minimum Vented Box Volume: 1.75 cubic feet
• Maximum Vented Box Volume: 3.25 cubic feet

Click here for the Owner's Manual

---

 

Features of Rockville Enclosure:

• Rockville RQ12VL SQ Dual 12" Vented Solo Baric L7S/L7R S12L7 Sub Enclosure Box
• Finished with Durable Bed Liner
• 3/4" MDF
• High Quality Spring Loaded Terminals
• Air Space: 2.25 Cubic Feet (per sub)
• Tuning Frequency: 42 HZ
• Product Dimensions (H x W x D): 14.5" x 36" x 22" inches

---

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.