Package Includes:

• (2) Pair KICKER 45KMTC8W 8" 600 Watt Marine Wakeboard Tower Speakers w/LED's KMTC8
• (1) MTX WET75.4 400 Watt RMS 4-Channel Marine Amplifier Amp 4 Boat/ATV/UTV/RZR/Cart
• (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
• (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote

---

Authorized Kicker Dealer!

 

What's In The Box:

• (2) Full Range Speaker Enclosures
• (1) Mounting Hardware Kit
• (1) Owner's Manual

Description:

Livin’ Loud and looking good, KICKER KMTC8 Coaxial Tower Systems are the strong, stylish solution your boat needs. You want great looks, total adjustability and next-level sound quality on your boat, whether you’re cruising to your favorite fishing hole or rockin’ at Party Cove. Rotate the speaker in any direction without tools, then watch the LED’s light up the night. Sold as pairs.

Features:

• Pair KICKER 45KMTC8W 8" 600 Watt Marine Tower Speakers w/ LED's
• RMS Power Handling: 150 Watts (Per Speaker)
• Peak Power Handling: 300 Watts (Per Speaker)
• Four-Ohm Voice Coil
• One-Inch Titanium Tweeter
• UV-Treated Polypropylene Woofer With Santoprene Surround
• 359° Swivel With Tool-less Locking Cam/Toggle System
• Stainless Steel/ABS Clamp Fits 1.5" - 3.25" Tubing
• UV-Resistant Polymer Basket
• Through-Clamp Wiring System
• 316L Stainless Mounting Hardware Included
• Grille With Seven-Color LED System Included
• Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
• Frequency Response: 30 Hz - 21 kHz
• Sensitivity: 92 dB
• Impedance: 4-Ohms
• Height (With Bracket): 12.38" inches
• Height (From Roll Bar): 9.44" inches
• Diameter: 8.19" inches
• Depth: 11.31" inches

---

Authorized MTX Audio Dealer!

Description:

Super Amp
WET Series amplifiers from MTX Audio are designed to deliver all the power your system needs whether they are being used on a boat, bike or off-road vehicle. The WET75.4 is a 4-channel full range amplifier. The WET75.4 is capable of producing up to 400W total RMS power, 100 watts per channel. The unit features a a class A/B circuit design that delivers exceptional sound quality and small chassis with an extruded heat sink that effectively dissipates heat ensuring long play times.

Marine Hardened
It also incorporates a surface mount design, which attaches critical parts more securely to the circuit board creating greater resistance to vibration which is very important in boat and off-road applications. This amplifier features a conformal coated circuit board making it resistant to moisture that may get into the the chassis. Other features include stainless steel hardware, rubber gaskets around interconnects, and plastic covers that cover the controls preventing moisture from getting into the amplifier.

Features:

• MTX WET75.4 400 Watt 4-Channel Class A/B Marine Amplifier for Boat/Marine
• RMS Power Output @ 2 Ohms: 100 Watts x 4 Channel
• RMS Power Output @ 4 Ohms: 75 Watts x 4 Channel
• RMS Power @ 4 Ohms Bridged: 170 Watts
• Signal to Noise Ratio: 80dB
• Frequency Response: 15Hz - 25kHz
• Topology: Class A/B
• THD: <1.0%
• Crossover: Variable LPF 50Hz to 750Hz (Rear), Variable HPF 10Hz-200Hz (Front), Variable HPF 50Hz-750Hz (Rear), 12dB/Oct
• Bass Boost: 0dB, 6dB, 12dB Switchable
• Max Sensitivity: 200mV
• Maximum Input Signal: 5V
• Weather Resistant: IP55 Rating
• Surface Mount PCB Design: Decreases chassis size, improves layout efficiency and increases vibration resistance without sacrificing performance or sound.
• Conformal Coated Circuit Board: Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions
• Variable Butterworth Crossover: A 12dB/Oct crossover that allows you to set the frequency your speakers will play down or up to
• Stainless Steel Hardware
• Rubber Gaskets Around RCA Connectors
• Plastic Cover Over Control Adjustments
• Triple Protection Circuitry: A Thermal, DC Offset, and Short Circuit Protection circuitry ensures the amplifier will protect itself in the event of a problem
• Product Dimensions (H x W x D): 2.25" x 12.13" x 6.38" inches

---

 

Video of RMWK:

Features:

• Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
• 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 25’ Blue Remote Wire
• (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 120A Mini-ANL Fuse
• (1) 80A Mini-ANL Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (5) Speaker Cable Terminals
• (1) Washer
• (10) White Cable Ties

---

All about your RGHR2:

How To Set Up Your RGHR2:

Included in the box:

• Marine digital media receiver
• Wired remote with 32.8 foot wire
• USB extension cable (40 inches)
• Mounting bracket
• Screws
• ISO wiring
• Owner manual and warranty

Description:

The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.

Crazy loud!
We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.

Included wired remote
Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.

Latest listening features
The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.

Ability to connect multiple external amps
This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplifiy your speakers and a subwoofer amplifier.

Features:

• Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
• Fits into a standard Gauge-Hole (Tachometer) Opening
• Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
• Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
• IP66 Waterproof Certification (Tested to withstand the elements)
• USB Input to play back audio files store on a USB thumb drive or any other USB device
• RCA Aux Input
• AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
• Bluetooth built in to stream audio from any Bluetooth enabled device
• USB Input Charges Your Phone
• Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
• Big easy to use buttons
• Backlit LCD display
• Wired Remote Control Included (normally $50)
• Required cutout: 2.96" (diameter) x 2.75" (depth)
• USB is 500mA and 5V and supports 16GB max
• Dimensions:
• 2.96" cutout mounting diameter
• 4.45" diameter top plate
• 3.9" mounting depth (not including top plate)
• 5.0" depth including the top plate
• Specs of the built in amplifier:
• TDA7851L quadbridge power amplifier
• 4 x 72 watts peak @ 2 ohm
• 4 x 48 watts peak @ 4 ohms
• 4 x 28 watts RMS @ 4 ohms
• Highly efficient even when running at 2 ohms!
• Low distortion even at top volumes