- (2) Pairs of Kicker 45KM654L 6.5" 390w Marine LED Speakers w/Charcoal+White Grilles KM65
- (1) MTX WET75.4 400 Watt RMS 4-Channel Marine Amplifier Amp 4 Boat/ATV/UTV/RZR/Cart
- (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
Authorized Kicker Dealer!
What's In The Box:
- (2) 6.5" 4-Ohm Coaxials
- (8) Mounting Screws
- (8) Mounting Screw Clips
- (2) Wire Connection Cover
- (2) Zip Ties
Description of 45KM654L:
They’re loud. They’re clear. They’re nearly indestructible! The KM Coaxial Marine Speakers are built to pump out the tunes – and the fun - for years to come! Whether you mount your speakers in the hull or in KICKER® tower enclosures, you also get a pair of stout marine-grade grilles!
Our speakers are made to thrive in the water. UV treatments on injection-molded cones, Santoprene surrounds, baskets and grilles all help maintain top-shelf performance. KM speakers will endure almost any weather conditions with splash-and-spray-resistant sealed motors, cones and Locking/Sealed Terminal Covers. Speaker hardware is forged from rustproof, 316L stainless-steel.
Features:
- Pair KICKER 45KM654L 6.5" 390 Watt Marine Waterproof Speakers w/ LED's
- RMS Power Handling: 65 Watts (Per Speaker)
- Peak Power Handling: 195 Watts (Per Speaker)
- Sensitivity: 90 dB
- Four-Ohm Voice Coil
- 3/4-Inch Titanium Tweeter
- UV-Treated Polypropylene Woofer With Santoprene Surround
- UV-Resistant Polymer Basket
- Locking/Sealed Terminal Cover
- Sealed Motor Structure
- 316L Stainless Mounting Hardware Included
- Charcoal and White Grilles Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
- Frequency Response: 35 Hz - 21 kHz
- Impedance: 4 Ohms
- Mounting Hole Diameter: 5.125" inches
- Mounting Depth: 2.875" inches
Click here for the Owner's Manual
Description of WET75.4:
Super Amp
WET Series amplifiers from MTX Audio are designed to deliver all the
power your system needs whether they are being used on a boat, bike or
off-road vehicle. The WET75.4 is a 4-channel full range amplifier. The
WET75.4 is capable of producing up to 400W total RMS power, 100 watts
per channel. The unit features a a class A/B circuit design that
delivers exceptional sound quality and small chassis with an extruded
heat sink that effectively dissipates heat ensuring long play times.
Marine Hardened
It also incorporates a surface mount design, which attaches critical parts more
securely to the circuit board creating greater resistance to vibration which is
very important in boat and off-road applications. This amplifier features a
conformal coated circuit board making it resistant to moisture that may get into
the the chassis. Other features include stainless steel hardware, rubber gaskets
around interconnects, and plastic covers that cover the controls preventing
moisture from getting into the amplifier.
Features:
- MTX WET75.4 400 Watt 4-Channel Class A/B Marine Amplifier for Boat/Marine
- RMS Power Output @ 2 Ohms: 100 Watts x 4 Channel
- RMS Power Output @ 4 Ohms: 75 Watts x 4 Channel
- RMS Power @ 4 Ohms Bridged: 170 Watts
- Signal to Noise Ratio: 80dB
- Frequency Response: 15Hz - 25kHz
- Topology: Class A/B
- THD: <1.0%
- Crossover: Variable LPF 50Hz to 750Hz (Rear), Variable HPF 10Hz-200Hz (Front), Variable HPF 50Hz-750Hz (Rear), 12dB/Oct
- Bass Boost: 0dB, 6dB, 12dB Switchable
- Max Sensitivity: 200mV
- Maximum Input Signal: 5V
- Weather Resistant: IP55 Rating
- Surface Mount PCB Design: Decreases chassis size, improves layout efficiency and increases vibration resistance without sacrificing performance or sound.
- Conformal Coated Circuit Board: Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions
- Variable Butterworth Crossover: A 12dB/Oct crossover that allows you to set the frequency your speakers will play down or up to
- Stainless Steel Hardware
- Rubber Gaskets Around RCA Connectors
- Plastic Cover Over Control Adjustments
- Triple Protection Circuitry: A Thermal, DC Offset, and Short Circuit Protection circuitry ensures the amplifier will protect itself in the event of a problem
- Product Dimensions (H x W x D): 2.25" x 12.13" x 6.38" inches
Click here for the Owner's Manual
Video of RMWK:
Features:
- Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
- 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
- 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
- 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
- 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
- 25’ Blue Remote Wire
- (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
- (1) 120A Mini-ANL Fuse
- (1) 80A Mini-ANL Fuse
- (2) Ring Terminals
- (2) Spade Terminals
- (5) Speaker Cable Terminals
- (1) Washer
- (10) White Cable Ties
Owner's manual
- UPC:
- 613815846581
