- (2) Kicker 12" Car Subwoofers
- (1) Rockville Dual 12" Vented Solo Baric L7/L5 S12L7 Car Sub Enclosure Box
- (1) Rockford Fosgate R1200-1D 1200 Watt RMS Mono Car Audio Amplifier
- (1) Rockville RWK21 2 Gauge Amp Installation Kit ANL Fuse Holder and RCA Cable
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
Authorized Kicker Dealer!
Description for Kicker Subs:
Square Matters
The Solo-Baric revolves around KICKER's most advanced cone design, the
injection-molded SoloKon™. The 360-degree, constant-contact back bracing
adheres directly to every contour of the square cone, adding targeted
strength, reliable performance and accurate response for the super-clean
bass you’ve been looking for.
Features:
- Kicker L7S122 12" 1500 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S12-2
- Dual Two-Ohm Voice Coils
- Injection-Molded Polypropylene Cone
- Patented Corner Ribs Minimize Distortion
- SoloKon™ 360-Degree Back Bracing
- Ribbed Santoprene Surround With Blue Surround Stitching
- UniPlate™ Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
- Thick Tinsel Leads
- Large Ceramic Magnet
- Cast Aluminum Basket
- Satin-Nickel Plated, Spring-Loaded Speaker Terminals
- The Solo-Baric L7S 12-Inch Subwoofer
works best with a sealed or ported enclosure and 750 watts of
recommended power. See below for more details.
Specifications:
- Size: 12" (30.5 cm)
- Impedance: 2 Ohms DVC
- Max Rec Amplifier Power: 1500 Watts Peak / 750 Watts RMS
- Sensitivity: 88.6 dB 1w/1m
- Frequency Response: 20Hz - 100Hz
- Mounting Depth: 6-11/16" (16.9 cm)
- Mounting Cutout, Square: 11-1/16" (28.1 cm)
- Min Rec Sealed Box Volume: 0.88 cu. ft. (24.9 liters)
- Max Rec Sealed Box Volume: 2.0 cu. ft. (56.6 liters)
- Min Rec Vented Box Volume: 1.75 cu. ft. (49.6 liters)
- Max Rec Vented Box Volume: 3.25 cu. ft. (92.1 liters)
Features of R1200-1D:
- Variable crossover 12dB/octave slopes
- 4 Gauge power/ground terminals
- Cast aluminum heatsink
- Infrasonic filter
- RCA pass-thru
- Top mounted controls
- Tri-stage protection covers thermal, over-current and short circuits
- On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
- CEA-2006 Compliant
- Number of Channels: 1
- RMS Power Handling:
- 600 Watts x 1 @ 4-Ohms
- 900 Watts x 1 @ 2-Ohms
- 1200 Watts x 1 @ 1-Ohm
- Total Power (Sum of RMS Power): 1200 Watts
- Low-Pass Crossover Controls: Variable 50Hz - 500Hz @ 12dB/Octave
- Tone Controls: 0dB to +12dB @ 45Hz
- Signal Input: Low Level: 1 RCA Pair
- Signal Output: 1 RCA Pair
- Power Input Connector: Block
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Block
- Speaker Wire Gauge: 12 AWG
- Remote Controls: Variable 0dB to +12dB @ 45Hz
- Visual Indicators:
- Power
- Protect
- Circuit Topology Class: Class-D
Video of RWK21:
Authorized Rockville Dealer!
Description:
The Rockville RWK21 2 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 2 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 150 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model includes (1) sets of RCA cables.
Features:
- Rockville RWK21 2 Gauge Car Amplifier Wiring Installation Kit
- (1) 17' High Grade Twisted Pair of 100% Copper RCA Cable
- 17' 2 Gauge Translucent Blue SuperFlex Power Cables
- 17' 18 Gauge Blue Remote Cable
- 17' 16 Gauge Clear Speaker Wire
- 3' 2 Gauge Clear SuperFlex Ground Wire
- Gold Plated ANL Heat Resistant Fuse Holder
- 150 Amp ANL Gold Plated Fuse
- 7 Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- Soft abrasion proof insulating jacket allows for 100% improved flexibility
- PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.
Great features and great quality make Rockville a great choice.
Description for Rockville Enclosure:
The RKDV12 is a dual vented square subwoofer box is made in the USA with Grade
“A” ¾” MDF wood. This enclosure is made with precision cutting machinery by
industry experts that have been making these enclosures in the USA for over 20
years. All Rockville enclosures come with a customized enhanced glue that is
unmatched by any other manufacturer. That means that the carpet will stay in
place and not rip or tear. The ¾” USA MDF is much stronger then any type of
import wood. This will keep your box performing at an optimal level by not
flexing and distorting your woofers. Your woofers will thank you! EVERY
Rockville enclosure is not only glued at all joints but stapled as well. If that
wasn’t enough we add a layer of silicon to every seam! This makes your Rockville
enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RKDV12 Dual 12" Vented/Ported Square Subwoofer Enclosure
- Designed For Square Subwoofers Such as The Solo Baric L7/L5/L3
- Machine precision cut mounting holes
- ¾” USA Heavy Duty MDF Construction
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work perfectly with 12" Kicker Solobaric L5 or L7 subs.
- Tuning frequency: 39Hz
Enclosure Measurements:
- Type of Enclosure: Sealed
- Enclosure Sub Size: Dual 12" Square
- Dimensions in Inches: 16.25" L x 36" W x 14.5 H"
- Top and Bottom Depth: 16.25"
- Mounting Depth: up to NA" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.3 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.75 Cubic Feet
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
- UPC:
- 613815951308
