- (2) KICKER 44CWCS124 CompC 12" 1200 Watt Single 4-Ohm Car Audio Subwoofer Subs
- (1) Rockford Fosgate Prime R500X1D 500 Watt RMS Mono Car Audio Class D Amplifier/Amp
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Authorized Kicker Dealer!
Description of 44CWCS124:
Huge value. High performance. The KICKER CompC Subwoofer pumps out the bass with all the intensity your ears can handle.
Perimeter venting keeps the air free-flowing around the motor structure. With a KICKER sub that doesn’t overheat, you get high-performance bass that keeps the music pounding. The CompC 12-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power.
Features:
- KICKER 44CWCS124 CompC 12" 600 Watt Single 4-Ohm Car Audio Subwoofer Sub CWCS124
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Perimeter Venting for Thermal Management
- Ribbed Polyurethane Surround
- Signature Yellow Surround Stitching
- High-Strength Spiralead™ Tinsel Leads
- Stamped Steel Basket
- High Temp Voice Coil
- Spring-Loaded Speaker Terminals
- Size: 12" (30 cm)
- Impedance: 4 Ohms SVC
- Max Rec Amplifier Power: 600 Watts Peak / 300 Watts RMS
- Sensitivity: 88.3 dB 1w/1m
- Frequency Response: 27Hz - 500Hz
- Mounting Depth: 5-3/8" (13.6 cm)
- Mounting Cutout: 11" (27.9 cm)
- Min Sealed Box Vol: 1.25 cu. ft (35.4 L)
- Max Sealed Box Vol: 3.5 cu. ft (99.1 L)
- Min Vented Box Vol: 1.75 cu. ft (49.6 L)
- Max Vented Box Vol: 2.25 cu. ft (63.7 L)
Description of R500X1D:
CEA 2006
CEA Compliant ensures speakers and subwoofers perform the ratings given, Rockford Fosgate is CEA Compliant and performs to their strict standards.
Features:
- Rockford Fosgate Prime R500X1D 500 Watt RMS Mono Block Class D Car Amplifier
- 12dB/octave Butterworth crossover
- RCA pass-thru outputs
- On-board Punch EQ with +18dB boost @ 45Hz.
- High level inputs
- Remote PLC (Punch Level Control)
- 0°/180° Phase Switch
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- 4 Gauge power/ground connectors
- MOSFET power supply
- Over current protection
- Short circuit protection
- Muted turn on
Details:
- CEA-2006 Compliant
- Number of Channels: 1
- Rated Power (RMS Continuous Power): 250 Watts x 1 @ 4-Ohms
- 500 Watts x 1 @ 2-Ohms
- Total Power
- (Sum of Rated Power): 500 Watts RMS
- Dynamic Power
- (PVC/PowerCube® Measurement):
- Bridgeable: No
- Efficiency (average): 85% @ 4-Ohm 85% @ 2-Ohm
- Crossover Controls: Low-Pass (LP): 50Hz to 250Hz @ 12dB/octave Butterworth
- Tone Controls: Punch Bass: 0dB to +12dB @ 45Hz
- Phase Control: Variable 0° to 180°
- Signal Input: Low Level: 1 RCA Pair
- Signal Output: Low Level: 1 RCA Pair
- Power Input Connector: Screw Terminal
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Screw Terminal
- Speaker Wire Gauge: 8 AWG
- Heat Sink Type: Extruded Aluminum
- Cooling: Convection
- Remote Controls: Punch Level Control: When connected is linked to "gain control" to provide remote output level
- Visual Indicators: Power Protect
- Circuit Topology Class: Class-D
- Frequency Response: 20Hz to 250Hz +/-1dB
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
- UPC:
- 613815912613