Package Includes:

• (2) KICKER 12" Single Car Audio Subwoofers
• (1) Rockville Dual 12” 1.25 cu.ft. 3/4” MDF Sealed Subwoofer Enclosure Sub Box
• (1) Kicker 43DXA5001 D-Series 500 Watt RMS Mono Class D Car Amplifier
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

---

Authorized Kicker Dealer!

Description for Kicker Subs:

Huge value. High performance. The KICKER CompC Subwoofer pumps out the bass with all the intensity your ears can handle.

Perimeter venting keeps the air free-flowing around the motor structure. With a KICKER sub that doesn’t overheat, you get high-performance bass that keeps the music pounding. The CompC 12-Inch Subwoofer works best with a sealed or ported enclosure and 300 watts of recommended power.

Features:

• KICKER 44CWCS124 CompC 12" 600 Watt Single 4-Ohm Car Audio Subwoofer Sub CWCS124 
• Four-Ohm Voice Coil
  
• Injection-Molded Polypropylene Cone
  
• Perimeter Venting for Thermal Management
  
• Ribbed Polyurethane Surround
  
• Signature Yellow Surround Stitching
  
• High-Strength Spiralead™ Tinsel Leads
  
• Stamped Steel Basket
  
• High Temp Voice Coil
  
• Spring-Loaded Speaker Terminals
  
• Size: 12" (30 cm)
  
• Impedance: 4 Ohms SVC
  
• Max Rec Amplifier Power: 600 Watts Peak / 300 Watts RMS
  
• Sensitivity: 88.3 dB 1w/1m
  
• Frequency Response: 27Hz - 500Hz
  
• Mounting Depth: 5-3/8" (13.6 cm)
  
• Mounting Cutout: 11" (27.9 cm)
  
• Min Sealed Box Vol: 1.25 cu. ft (35.4 L)
  
• Max Sealed Box Vol: 3.5 cu. ft (99.1 L)
  
• Min Vented Box Vol: 1.75 cu. ft (49.6 L)
  
• Max Vented Box Vol: 2.25 cu. ft (63.7 L)

---

Description of 43DXA5001:

Built for Big Bass in a Package
The 2016 DXA500.1 Mono Amplifier is built for big bass in a package. This powerhouse combines the brute force of a Class D power plant with FIT™ (Fail-Safe Integration Technology) for superior wiring flexibility. A 12dB crossover and 24dB subsonic filter is also included, letting you quickly tune your system to perfection. This DX amplifier delivers as much as 500 watts into one channel.

Features:

• Kicker 43DXA5001 D-Series 500 Watt RMS Mono Class D Car Amplifier Amp DXA500.1 
• RMS Power:
  .....@ 14.4V, 4O mono, = 1% THD+N : 250 Watts x 1
  .....@ 14.4V, 2O mono, = 1% THD+N : 500 Watts x 1
• Mono channel operation
• Built-in electronic crossover for precise speaker matching
• FIT™ technology: Fail-Safe Integration Technology
• Advanced circuitry for superior power, clarity and dependability
• Preamp inputs and outputs
• Speaker-level inputs require speaker wire to RCA adapters
• 4-gauge power and ground leads and a 80-amp fuse recommended (Not include in this amplifier)
  
• Length: 8-1/8 in. (21 cm)
  
• Height: 2-3/8 in. (6 cm)
  
• Width: 7-3/16 in. (18 cm)
  
• Frequency Response: 25-200 Hz
  
• Signal-to-Noise Ratio: >95 dB, A-weighted, re: rated power
  
• Input Sensitivity
  .....Low Level: 125mV–5V
  .....High Level: 250mV–10V
  
• Electronic Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
  
• KickEQ™ Bass Boost: Variable 0–12dB @ 40Hz
  
• Subsonic Filter: 25Hz, 24dB/octave
  
• Remote Bass: Yes (sold separately)
  

---

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

---

Description for Rockville Enclosure:

The RD12 dual sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RD12 Dual 12" Sealed Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 13.25” x 13.25” x 32”
• Top and Bottom Depth: 14"
• Mounting Depth: up to 12" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.55 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.25 Cubic Feet

---

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.