Package Includes:

• (2) Kicker 50CVX102 COMPVX 10" Car Audio Subwoofer DVC 2 Ohm Sub CVX102
• (1) Hifonics Zeus ZXX-2400.1D 2400W RMS Mono Block Class D Car Amplifier+Bass Remote
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

---

What's in the Box:

• 10-inch Subwoofer
  
• Owner's Manual
  
• Two Stickers
  

Description:

The CompVX's™ basket is cast aluminum with motor-cooling perimeter venting and spring-loaded terminals that can accept up to 10-gauge wire.

Inside the sub, the poly-cotton, semi-progressive-roll spider supplies substantial stability for the loudest bass possible. Externally, a ribbed Santoprene® surround protects the cone during max excursion.

Features:

• Dual Two-Ohm Voice Coils
  
• Thick Polypropylene Cone
  
• Signature Double Blue Surround Stitching
  
• Ribbed Santoprene® Surround
  
• SoloKon™ Cone Reinforcement
  
• Oversized Suspension System
  
• High-Strength Insulated Tinsel Leads
  
• High Temp Voice Coil
  
• Perimeter Venting for Thermal Management
  
• Massive Ceramic Magnet
  
• UniPlate™ Extended Pole Piece & Backplate For Superior Heat Dissipation
  
• Cast Aluminum Basket
  
• Satin Nickel Spring-Loaded Speaker Terminals
  
• The CompVX 10-Inch Subwoofer works best with a sealed or ported enclosure and 600 watts of recommended power
  

Specifications:

• Thiele/Small Parameters: 50CVX102
  
• Size (IN.,CM): 10, 25
  
• Impedance (OHMS): 2 DVC
  
• Recommended Amplifier Power (watts RMS): 600
  
• Peak Power (watts, per ANSI/CTA-2031-A): 1200
  
• Sensitivity (dB 1w/1m): 85.7
  
• Frequency Response (Hz): 24-500
  
• Mounting Depth (in, cm): 5-15/16, 15.1
  
• Mounting Cutout (in, cm): 9-3/16, 23.3
  
• Min Sealed Box Vol (cu. ft, L): .8, 22.7
  
• Max Sealed Box Vol (cu. ft, L): 3.0, 85.0
  
• Min Vented Box Vol (cu. ft, L): 1.25, 35.4
  
• Max Vented Box Vol (cu. ft, L): 1.75, 49.6

---

Description of ZXX-2400.1D:

A classic Hifonics aluminum heatsink with a Zeus 2400 Watt, 1 ohm stable, Class D mono subwoofer car audio amplifier. Features include onboard electronic crossover and boost EQ. Bass remote included.

Features:

• Hifonics Zeus ZXX-2400.1D 2400W RMS Mono Block Class D Car Amplifier+Bass Remote 
• Pre-Amp Circuitry: Low Noise PreAmplifier - Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  
• Inputs: Nickel Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  
• Hi Level Inputs: Low Level RCA Inputs and Outputs - Highest sound quality connection
  
• Operation Mode: Mono mode - Purpose built 1 channel amplifier for driving subwoofers and subwoofer systems
  
• Class / Topology: Class D - High efficiency with big power in a small footprint
  
• Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
  
• Heat Sink: Aluminum - Old School Hifonics Heat sink for Superior Heat Dissipation
  
• Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  
• Bass Remote: Included - Wired Bass Remote allows adjustments to bass frequencies to be made from the control mounted anywhere in the vehicle.
  
• Output Connections: RCA Outputs - Daisy chain multiple amplifier to eliminate additional signal cables from the source unit
  
• Connections Type : Molded / Angled - Secure connection for all system wires. Angled for ease of access for installation
  
• Diagnostics: Diagnostic Indicators DC, Short Circuit, Thermal and Overload Protection - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  
• Illumination: Illuminated Logo - The Hifonics logo illuminates when the amplifier is powered
  

Specifications:

• Class: Class D
  
• Variable Voltage: 6V - 0.2V
  
• Signal to Noise Ratio: >95dB
  
• Frequency Response: 10Hz-300Hz
  
• Crossover Type: Variable Electronic
  
• Low Pass Crossover: 12dB Per Octave: 40Hz-300Hz
  
• Bass Boost: 0~12dB
  
• Subsonic Filter: 10Hz-40Hz
  
• Power @ 1-Ohm: 1x2400W
  
• Power @ 2-Ohms: 1x1200W
  
• Power @ 4-Ohms: 1x650W
  
• Total Channels: Mono
  
• Audio Inputs: RCA Jack
  
• Audio Outputs: RCA Jack
  
• Power Terminal 12v/GND: 2 gauge
  
• Speaker Terminal Wire Gauge: 12 gauge
  
• Fusing: 70A x 2
  
• Dimensions: 17.3 x 2.4 x 10 in (43.9 x 6 x 25.4 cm)
  

---

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets