Package Includes:

• (2) Kicker 12" Car Stereo Subwoofers
• (1) Rockville Dual 12" 1.75 cu.ft. Vented/Ported Sub Enclosure Box
• (1) Rockford Fosgate R1200-1D 1200 Watt RMS Mono Car Audio Amplifier
• (1) Rockville RWK21 2 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

Authorized Kicker Dealer!

Description for Kicker Subs:

The CompRT 12-Inch Subwoofer is an all-weather thin mount subwoofer with a 2 Ohm dual voice coil design for superior wiring flexibility. The CompRT is designed for the sound quality audiophiles want, with the weatherproof performance powersports enthusiasts need. The CompRT 12-Inch Subwoofer works best with a sealed or ported enclosure and 500 watts of recommended power.

The only thing thin about the CompRT® Subwoofer is the mounting depth. Whether it’s on the road, sand or trail, these tough subs work perfectly in nearly anything with a motor.

Features:

• Kicker 43CWRT122 1000W 12" DVC 2-Ohm Car Subwoofer
  
• Size [in, cm]: 12, 30
• Impedance [Ohms]: 2 DVC
• Power Handling:
  .....1000 Watts Peak
  .....500 Watts RMS
• Wire terminals featuring impedance-selector provide installation flexibility
  
• Injection molded polypropylene cone
  
• Santoprene surround
• Added voice-coil clearance for full excursion
  
• High-temperature voice coil wire to allow for high power handling
  
• Quad venting for ultimate cooling
  
• Full-coverage steel basket with minimized mounting depth
• Double stitched surround for enhanced cone-to-surround strength
• Weatherproof performance
• Powerful rear magnet
• Frequency Response: 25-500 Hz
  
• Sensitivity [dB 1w/1m]: 85.5
  
• Mounting Depth [in, cm]: 3-3/4,9.6
  
• Mounting Diameter [in, cm]: 11, 27.9
  
• Min Sealed Box Vol [cu. ft, L]: 0.55, 15.57
  
• Max Sealed Box Vol [cu. ft, L]: 2.0, 56.64
  
• Min Vented Box Vol [cu. ft, L]: 1.75, 49.6
  
• Max Vented Box Vol [cu. ft, L]: 2.25, 63.7

• Variable crossover 12dB/octave slopes
• 4 Gauge power/ground terminals
• Cast aluminum heatsink
• Infrasonic filter
• RCA pass-thru
• Top mounted controls
• Tri-stage protection covers thermal, over-current and short circuits
• On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
• CEA-2006 Compliant

• Number of Channels: 1
• RMS Power Handling:
• 600 Watts x 1 @ 4-Ohms
• 900 Watts x 1 @ 2-Ohms
• 1200 Watts x 1 @ 1-Ohm
• Total Power (Sum of RMS Power): 1200 Watts
• Low-Pass Crossover Controls: Variable 50Hz - 500Hz @ 12dB/Octave
• Tone Controls: 0dB to +12dB @ 45Hz
• Signal Input: Low Level: 1 RCA Pair
• Signal Output: 1 RCA Pair
• Power Input Connector: Block
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Block
• Speaker Wire Gauge: 12 AWG
• Remote Controls: Variable 0dB to +12dB @ 45Hz
• Visual Indicators:
• Power
• Protect
• Circuit Topology Class: Class-D

Video of RWK21:

Authorized Rockville Dealer!

Description:

The Rockville RWK21 2 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 2 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors.  This model includes (1) sets of RCA cables.

Features:

• Rockville RWK21 2 Gauge Car Amplifier Wiring Installation Kit
• (1)  17' High Grade Twisted Pair of 100% Copper RCA Cable
• 17 4 Gauge Translucent Blue SuperFlex Power Cables
• 17' 18 Gauge Blue Remote Cable
• 17' 16 Gauge Clear Speaker Wire
• 3' 2 Gauge Clear SuperFlex Ground Wire
• Gold Plated ANL Heat Resistant Fuse Holder
• 150 Amp ANL Gold Plated Fuse
• 7 Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

The RDVB12 is a dual vented  speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood.  This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you!  EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RDVB12 Dual 12" 1.75 cu.ft. MDF Vented/Ported Subwoofer Enclosure Box
• Dual 12" vented subwoofer enclosure
• Hardwood MDF
• Machine precision cut mounting holes
• 3/4" USA Heavy Duty MDF Construction
• Top of the line Glue for extra durable adhesion
• High quality GOLD spring loaded terminals
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
• Made in the USA
• Tuning frequency: 39Hz

Enclosure Measurements:

• Type of Enclosure: Vented
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 16.75" L x 36" W x 13.25 H"
• Top and Bottom Depth: 16.75"
• Mounting Depth: up to 17.75" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.3 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.75 Cubic Feet

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.