Package Includes:
- (2) Kicker 43CWR154 15" DVC 4-Ohm Car Stereo Subwoofers Totaling 3200 Watt
- (1) Rockville RXD-M4 1500 Watt CEA Compliant Rating Mono Class D Car Amplifier
- (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Kit OFC
Authorized Kicker Dealer!
Video of 43CWR154:
Description:
CompR takes flexibility to another level with a single pair of stout, push-button wire terminals featuring a convenient impedance-selector slider for easily changing the dual-voice-coil impedance (2/8 Ohms or 1/4 Ohms, depending upon model). No additional wiring is needed for switching between series or parallel configurations.
Besides convenience, CompR delivers the deepest musical bass and is made to work perfectly with any mono amplifiers. The motor structure itself is a mechanical marvel, utilizing a large-diameter, progressive-roll spider for increased linearity and better sound with high-strength Spiralead™ tinsel leads woven through for maximum transfer of signal. A KICKER standard, the one-piece UniPlate,™ features the vented pole piece and bumped back plate that's tapered toward the edge to improve the magnetic force within the gap, optimizing that magnetic energy. The "bump" provides added voice-coil clearance, assuring precise performance. High-temp coil wire winding around the pole piece and innovative Quad Venting™ slots contribute to the woofers' efficient cooling attributes and durability.
More Magnet:
With a double stacked magnet, the CompR provides powerful bass and a thunderous low-end response for the thump you crave when the volume knob needs a workout.
More Features:
Kicker signature red double stitching makes an outstanding bond between the improved Santoprene®™ surround and a new all-polypropylene woofer cone. You get a deeper bass that stays pumping, no matter what the volume.
Two Coils, One Solution:
Every CompR has two sets of brass voice coil terminals, spring-loaded and covered in a lustrous satin nickel finish. A simple push of the terminal gives you the wiring options you need to get the most out of your system.
15" CompR 4 Ohm:
- The CompR 15-Inch Subwoofer features a 4O dual voice coil design, making it easy to get the most out of your amp.
- An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent – all without a hint of distortion.
- The CompR 15-Inch Subwoofer works best with a sealed or ported enclosure and 800 watts of recommended power.
Features/Specifications:
- Kicker 43CWR154 15" 1600 Watt Dual Voice Coil 4-Ohm Car Stereo Subwoofer
- Power Handling :
- Peak : 1600 watts
- RMS : 800 watts
- Size : 15"
- Best subwoofer in its class
- Workhorse woofer with advanced components and superior technology
- Large-diameter, progressive-roll spider with high-strength Spiralead™ tinsel leads
- One-piece UniPlate™ with vented pole piece and bumped back plate
- Added voice-coil clearance for full excursion; high-temp coil wire
- Quad Venting™ included vertical and horizontal slots under the cone for ultimate cooling
- Injection-molded polypropylene cone and tough Santoprene® surround
- Full-coverage steel basket with minimized mounting depth
- Stamped Steel Basket
- Spring-loaded Push Terminals
- Dual 4-Ohm high-temperature voice coils
- Double Stacked Magnet
- Frequency Response : 25 - 500Hz
- Sensitivity : 89.4dB @ 1w/1m
- Mounting Depth : 7-15/16"
- Mounting Diameter : 13-3/4"
- Min Sealed Box Vol : 1.8 cu. ft.
- Max Sealed Box Vol : 3.0 cu.ft.
- Min Vented Box Vol : 3.0 cu.ft.
- Max Vented Box Vol : 5.0 cu.ft.
Video of RXD-M4:
Authorized Rockville Dealer!
Description:
Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market and of course at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.
The RXD-M4 is a mono amplifier with 6,000 watts peak output and 1500 watts
CEA-2006 rated power. Here at Rockville we offer the best value in car audio. We
therefore want to make it easy for you to compare our products to any brands on
the market. The peak rating can be used to compare with brands who use peak
ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be
used to compare with brands who rate their items using the CEA standard such as
Kicker, Rockford, Alpine, etc.
One of the tricks to determine the real power of a car amplifier is to
multiply the fuse rating by 10 to determine the true RMS power. This
formula almost always works within 20 %. RXD-M4 features a 200 Amp External In-Line ANL Fuse Block.
Compare this to other amps on the market with similar fuse ratings and
you’ll see that with the RXD-M4 you are getting your money’s worth and
then some.
This unit also features a high speed MOSFET power supply and
studio-grade bipolar output stage transistors. It has a fully adjustable
12dB/Octave cross over with differential circuitry. Other features
include a subsonic filter, a fully adjustable bass equalizer, mute and
delay soft start technology, a phase control switch, and a dashboard
subwoofer control for added convenience. The RXD-M4 is protected by a
full IC controlled circuit and has professional peak limiter circuitry
guaranteeing distortion free musical playback at all levels.
The RXD mono amplifiers took years of engineering. A lot of new
technology went into these amps. We call this technology optical coupler
Class-D. This new technology gives the amplifier punchier bass compared
with a typical class “D” amp. A major difference in our OC technology
is the preamp input stage and output stage are separated in circuitry.
It is less susceptible to noise, which typically is picked up from the
preamp input. The RCA input accepts both balanced and un-balance inputs.
If there is potential inference in the car, the balanced input signal
is less susceptible to noise.
The Phenom amps by Rockville use only the top parts. We use Siemens
correction capacitors which are well-known for producing crystal clear
sound quality. We use TL072 OP (power supply) which is composed of
mosfets. Typical class “D” amps use JRC4558, which is composed of
transistors only. Mosfet power supplies have a higher speed, lower loss
rate, lower noise, and ultimately supply more efficient and clean power
along with lower THD (distortion). We redesigned the layout of the PCB
boards to allow the amp to run smooth and cool. Each and everything
amplifier we manufacture is tested twice. Once at the semi-finished PCB
stage of production and then another test is done at the final assembly.
We also run age tests on them. After this is all done, we hire a 3rd
party independent company unaffiliated with our factory or with us to go
to the factory and do random inspections of the power and over 20 other
tests. We guarantee these amps will satisfy you. We are so confident in
your satisfaction of this amplifier that we will offer you a 90 day
money back guarantee. This means if for any reason you want to return
the amplifier back and get a full refund we will send you a label and
take the amp back and give you all your money back. (Amp must be
complete along with the box).
Features:
- Rockville RXD-M4 6000 Watt/3000w Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology
- CEA Compliant Power Ratings (Rated at less than 1
% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc)
- 1 Ohm: 1500 Watts x 1 Channel <1% THD+N
- 2 Ohm: 1000 Watts x 1 Channel <1% THD+N
- 4 Ohm: 750 Watts x 1 Channel <1% THD+N)
- RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc)
- 1 Ohm: 3000 Watts x 1 Channel
- 2 Ohm: 2000 Watts x 1
Channel
- 4 Ohm: 1500 Watts x 1 Channel
- Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song
- 1 Ohm: 6000 Watts x 1 Channel
- 2 Ohm: 4000 Watts x 1 Channel
- 4 Ohm: 3000 Watts x 1 Channel
- 1 Ohm: 6000 Watts x 1 Channel
- Strappable - This amp can be bridged together with another amplifier to deliver twice the power
- High-Speed MOSFET Power Supply
- Optical Coupler Class “D” Technology
- Studio-Grade Bipolar Output Stage Transistors
- Now exclusively with “Professional Peak Limiter Circuitry” which guarantees distortion free musical playback at all levels.
- Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
- Low Pass Filter: 50Hz - 250Hz
- Subsonic Filter: 15Hz - 55Hz
- Phase Control Switch
- Full IC-Controlled Protection Circuitry
- Remote Dashboard Subwoofer Control
- Fully Adjustable 12dB Bass Equalizer
- Mute and Delay Soft Start System
- RCA Preamp Line Output
- 8 Volt Preamp Circuitry
- Status Mode LED Indicator
- Minimum THD at Rated Power: < 0.05%
- S / N Ratio: > 100dB
- Frequency Response: 10Hz - 500Hz
- Damping Factor: > 220 @ 100Hz
- 200 Amp External In-Line ANL Fuse Block
- Dimensions: (W x H x L) 8.5? x 1.8? x 17.7?
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.
Video of RWK0CU-1:
Video of RWK0CU-2:
Description:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more copper than 100 %. So the only way a cable would out-perform this one is if it were being advertised as a 0 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.
Maximum Power!
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 0 gauge cable? Then look no further than the Rockville True-Spec RWK0-CU 0 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency.
The power and ground cables aptly named “Mega Power Cable” are a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.
The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 250-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 12 gauge speaker cable included in the 0 gauge kit can handle over 3000 watts of power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.
Amplifier Kit Key Features:
- 0 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 3000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 4704
- BC-5W2 Compliant
- 17 ft. Frosted Blue 0 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 0 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 12 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One ANL Fuse Holder with 250 amp ANL fuse
- One 1/2" black rubber firewall grommet
- Two 0 gauge spade terminals
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 0 gauge ring terminal
- Ten 6" black zip ties
- UPC:
- 613816019809