- (2) Kicker 43CWR152 COMPR15 15" 1600 Watt 2-Ohm DVC Car Audio Subwoofer Sub CWR15-2
- (1) Kicker 46CXA18001 CXA1800.1 1800 Watt RMS Mono Class D Car Audio Amplifier Amp
- (1) Rockville RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
Authorized Kicker Dealer!
Video of 43CWR152:
CompR takes flexibility to another level with a single pair of stout, push-button wire terminals featuring a convenient impedance-selector slider for easily changing the dual-voice-coil impedance (2/8 Ohms or 1/4 Ohms, depending upon model). No additional wiring is needed for switching between series or parallel configurations.
Besides convenience, CompR delivers the deepest musical bass and is made to work perfectly with any mono amplifiers. The motor structure itself is a mechanical marvel, utilizing a large-diameter, progressive-roll spider for increased linearity and better sound with high-strength Spiralead™ tinsel leads woven through for maximum transfer of signal. A KICKER standard, the one-piece UniPlate,™ features the vented pole piece and bumped back plate that's tapered toward the edge to improve the magnetic force within the gap, optimizing that magnetic energy. The "bump" provides added voice-coil clearance, assuring precise performance. High-temp coil wire winding around the pole piece and innovative Quad Venting™ slots contribute to the woofers' efficient cooling attributes and durability.
More Magnet:
With a double stacked magnet, the CompR provides powerful bass and a thunderous low-end response for the thump you crave when the volume knob needs a workout.
More Features:
Kicker signature red double stitching makes an outstanding bond between the improved Santoprene®™ surround and a new all-polypropylene woofer cone. You get a deeper bass that stays pumping, no matter what the volume.
Two Coils, One Solution:
Every CompR has two sets of brass voice coil terminals, spring-loaded and covered in a lustrous satin nickel finish. A simple push of the terminal gives you the wiring options you need to get the most out of your system.
15" CompR 2 Ohm:
- The CompR 15-Inch Subwoofer is a 2O dual voice coil design, making it easy to get the most out of your amp.
- An absolute workhorse of a sub, the advanced suspension system includes a ribbed polypropylene surround and a large-diameter spider for linear movement, and a distortion-free sound.
- The CompR 15-Inch Subwoofer works best with a sealed or ported enclosure and 800 watts of recommended power.
Features/Specifications:
- Kicker 43CWR152 15" 1600 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer
- Power Handling:
- Peak : 1600 watts
- RMS : 800 watts
- Size : 15"
- Best subwoofer in its class
- Workhorse woofer with advanced components and superior technology
- Large-diameter, progressive-roll spider with high-strength Spiralead™ tinsel leads
- One-piece UniPlate™ with vented pole piece and bumped back plate
- Added voice-coil clearance for full excursion; high-temp coil wire
- Quad Venting™ included vertical and horizontal slots under the cone for ultimate cooling
- Injection-molded polypropylene cone and tough Santoprene® surround
- Full-coverage steel basket with minimized mounting depth
- Stamped Steel Basket
- Brass Spring-loaded Push Terminals
- Dual 2-Ohm high-temperature voice coils
- Double Stacked Magnet
- Sensitivity : 89.4dB @ 1w/1m
- Mounting Depth : 7-15/16"
- Mounting Diameter : 13-3/4"
- Min Sealed Box Vol : 1.8 cu. ft.
- Max Sealed Box Vol : 3.0 cu. ft.
- Min Vented Box Vol : 3.0 cu. ft.
- Max Vented Box Vol : 5.0 cu.ft.
Advantages of purchasing from an authorized seller:
- Best prices - We sell all Kicker products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Kicker product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Kicker products from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Authorized Kicker Dealer!
Description of 46CXA18001:
CX-Series Amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.
The CXA1800.1 Mono Amplifier is built for
big bass in a sleek, yet affordable package. Using a Class-D power plant and
FIT+™ (Fail-safe Integration Technology-PLUS) for superior dependability, this
amp features a variable bass boost with KickEQ™, giving you as much as a 6dB of
extra bump with a simple turn of the optional CXARC Remote Bass Controller.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input
signal. This kind of flexibility both makes line-out converters unnecessary and
optimizes your sound quality at the same time! A powerful 12dB crossover
and 24dB subsonic filter is included, letting you quickly tune your system to
perfection. Use the full range outputs to expand your system with other bass
amps, or add a full range amp to complete your system. This CX-Series Amplifier
delivers as much as 1,800 watts into one bass channel.
Features:
- KICKER 46CXA18001 CXA1800.1 1800 Watt RMS Mono Class D Car Audio Amplifier Amp
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
- Dimension (L x W x H): 18.25 inch x 9 inch x 4 inch
- Weight: 9.55 lbs
Specifications:
- Power Rating:
- .....4 ohms: 900 watts x 1 chan.
- .....2 ohms: 1800 watts x 1 chan.
- CXRC Remote Bass Capable (sold sep.)
- Dimensions: 14-3/8 in. (36.4 mm)
- Frequency Response: 25 - 200Hz
- Input sensitivity: Low level: 250mV-10V ; High level: 1V-40V
- Signal to Noise Ration: >95dB
- Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
- Subsonic Filter @ 25hz, 24db/octave
- KickEQ™ Boost: Variable 0-6dB @40Hz
Advantages of purchasing from an authorized seller:
- Best prices - We sell all Kicker products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Kicker product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Kicker products from an un-authorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Videos of RWK0CU:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more copper than 100 %. So the only way a cable would out-perform this one is if it were being advertised as a 0 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.
Looking for a wire kit that has 100% true specifications? A wire kit that uses 100% copper 0 gauge cable? Then look no further than the Rockville True-Spec RWK0-CU 0 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency.
The power and ground cables aptly named “Mega Power Cable” are a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.
The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 250-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 12 gauge speaker cable included in the 0 gauge kit can handle over 3000 watts of power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.
Amplifier Kit Key Features:
- 0 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 3000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 4704
- BC-5W2 Compliant
- 17 ft. Frosted Blue 0 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 0 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 12 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One ANL Fuse Holder with 250 amp ANL fuse
- One 1/2" black rubber firewall grommet
- Two 0 gauge spade terminals
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 0 gauge ring terminal
- Ten 6" black zip ties
- UPC:
- 613816262823
