Package Includes:

• (2) KICKER 48CWR124 CompR 1000 Watt 12" Subwoofer DVC 4-ohm Car Sub CWR12-4 COMPR12
• (1) Polk Audio PAD1000.1 Mono 1200 Watt RMS 1-Ohm Car Audio Amplifier Amp
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

---

Description of 48CWR124:

Now even more efficient and sporting a slick, blacked-out look, the 2021 CompR® sub is the very model of power and reliability.

12" CompR 4 Ohm
The CompR 12-Inch Subwoofer is a 4O dual voice coil design, making it easy to get the most out of your amp.

An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent. Revolutionary SoloKon™ technology joins the cone to the vented back brace, creating a single integrated unit that both cools the motor and eliminates distortion.

To make our subs even more reliable, KICKER engineers developed Forced Air Cooling to help our subs run 25% cooler than before.

The CompR 12-Inch Subwoofer works best with a sealed or ported enclosure and 500 watts of recommended power. See below for more details.

Specifications:

• SIZE [in, cm]: 12, 30
  
• IMPEDANCE [Ohms]: 4 DVC
  
• Recommended Amplifier Power (watts RMS): 500
  
• Peak Power (watts, per ANSI/CTA-2031-A): 1000
  
• SENSITIVITY [dB 1w/1m]: 86.9
  
• MOUNTING DEPTH [in, cm]: 5-3/4, 14.6
  
• MOUNTING DIAMETER [in, cm]: 11, 27.9
  
• MIN SEALED BOX VOL [cu. ft, L]: 1.0, 28.3
  
• MAX SEALED BOX VOL [cu. ft, L]: 2.0, 56.64
  
• MIN VENTED BOX VOL [cu. ft, L]: 1.75, 49.6
  
• MAX VENTED BOX VOL [cu. ft, L]: 2.25, 63.7

---

Features of PAD1000.1:

• Polk Audio PAD1000.1 Mono 1200 Watt RMS 1-Ohm Car Audio Amplifier Amp PA D1000.1 
• Super-Efficient Class D Design—Runs much cooler than conventional amps.
• High-Speed MOSFET Switching—Power supply with outputs stable into 1 Ohm loads.
• Protection—Thermal, DC offset, reverse polarity and short circuit protection.
• Variable Low-Pass Filter: 40 Hz - 220 Hz.
• Variable Subsonic Filter: 20 Hz - 38 Hz.
• Bass Boost at 0 dB - 12 dB.
• Bass Boost at 44 Hz.
• Remote Subwoofer Level Control.
• Nickel-Plated Wire Terminals & RCA connectors—Ensure maximum signal transfer.
• Level Control—Adjusts the gain of the channel to match the output voltage from your head unit.
• Line Level Outputs—Provides a full range signal for easy connection to additional amplifiers.
• Stainless Steel Hardware—Used throughout won’t corrode in humid environments.
  

Specifications:

• Type: Class D MOSFET
  
• Channels: monoblock
  
• RMS Continuous Power @ 4 Ohms: 500 W x 1
  
• RMS Continuous Power @ 2 Ohms: 800 W x 1
  
• RMS Continuous Power @ 1 Ohm: 1200 W
  
• Distortion at Rated Power: <0.1%
  
• Remote Gain Control Included
  
• Minimum Impedance Not Bridged: 1 Ohm
  
• Signal-to-noise Ratio: 105 dB
  
• Frequency Response: 20 Hz - 200 Hz
  
• Damping Factor: >150
  
• Crossover Filter Slope (dB/octave): 12 dB/octave
  
• Sub Sonic Filter Frequency Range: 20 Hz - 38 Hz
  
• Low Pass Filter Frequency Range: 40 Hz - 220 Hz
  
• Bass Boost Frequency: 44 Hz
  
• Bass Boost (dB) Variable (0 dB - 12 dB)
  
• Line Level Inputs
  
• Line Level Outputs
  
• LED Power Indicator
  
• LED Protection Indicator
  
• Input Sensitivity: 200 mV - 6 V
  
• Supply Voltage: 10 V - 16 V
  
• Fusing & Power/Type: (3) 40 Amp ATC
  
• Power Connections: 4 AWG
  
• Ground Connections: 4 AWG
  
• Speaker Connections: 12 AWG
  
• Height: 1 13/16" (46 mm)
  
• Depth: 6 3/4" (171.5 mm)
  
• Width: 12 15/16" (328.6 mm)
  
• Width w/ Terminal Adaptor: 13 11/16" (347.7 mm)
  
• Weight: 6 1/2 lbs (2.95 kg)

---

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets