Package Includes:

• (2) Kicker 43CVT104 10" 4-Ohm SVC Car Stereo Subwoofers Totaling 1600 Watt
• (1) Kicker 43CXA6001 600 Watt RMS Mono Class D Car Audio Amplifier
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

---

Authorized Kicker Dealer!

Description of 43CVT104:

Slimline:
A specially made motor and reinforced cone make the CompVT a perfect choice for big bass without a big box.

Recess Time:
The included Clearance Plate allows the CompVT to sit in a recess made in the back of the enclosure. Now you can make a thin box even thinner!

Beat the Heat:
With full perimeter venting and UniPlate™ black plate and pole piece, you have outstanding thermal management in an ultra-thin sub.

10" CompVT 4 Ohm

• The CompVT 10-Inch Subwoofer is a 4Ω slimline driver. 
• The woofer’s stiff, injection-molded, modified-spoke cone is shaped to provide maximum excursion from a slender basket, allowing better strength and durability.
• The CompVT 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power.

Features/Specifications:

• Kicker 43CVT104 10" 800 Watt Single Voice Coil 4-Ohm Car Stereo Subwoofer
• Power Handling :
• Peak : 800 watts
• RMS : 400 watts
• Size : 10"
• Shallow-mount subwoofer with true high-performance
• This sub is slim enough to be mounted in virtually any vehicle
• Delivers extreme bass with minimum depth
• Four-layer voice coil for max power handling
• Dark gray modified-spoke cone with bracing for clear bass response
• Ventless solid-pole design for direct mount to enclosure rear wall
• Steel “clearance” adapter plate replaces part of enclosure wall depth to further lessen depth
• Injection molded SoloKon cone
• Ribbed Santoprene surround
• High-temp coil wire
• Slender, strong steel basket with coil-cooling perimeter venting
• Durable Spiralead tinsel leads
• Stitched surround for enhanced cone-to-surround strength
• Tough double-stitched surround
• Special spring-loaded binding posts for minimizing depth
• UniPlate™ system redirects heat away from motor structure
• Stamped Steel Basket
• Single 4-Ohm high-temperature voice coils
• Top-mount depth : 4-1/4"
• Cutout diameter : 9-3/16"
• Frequency Response : 25 - 500Hz
• Sensitivity : 87.2 dB
• Minimum Sealed Enclosure : 0.8 cu. ft.
• Maximum Sealed Enclosure : 3 cu. ft.
• Minimum Ported Enclosure : 1.25 cu. ft.
• Maximum Ported Enclosure : 1.75 cu. ft.
• Subwoofer Design : Round / Circle

---

Description of 43CXA6001:

The CX 600.1 Mono Amplifier is built for big bass in a sleek, yet affordable package. Using a Class D power plant and FIT™ (Failsafe Integration Technology) for superior dependability, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. Use the full range outputs to expand your system with other bass amps, or a full range amp to complete your system.

CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash. This CX amplifier delivers as much as 600 watts into one channel.

Features:

• Kicker 43CXA6001 600 Watt RMS Class D Car Amplifier
  
• 2-Ohm Stable Monoblock Amplifier
  
• RMS Power Rating:
  .....4 ohms: 300 watts x 1 chan.
  .....2 ohms: 600 watts x 1 chan.
  
• Total power output: 1200 watts
  
• Pulse Width Modulated MOSFET power supply
  
• Kicker CXARC wired remote bass level control available and sold separately
  
• LED power (green) and protect (red) indicators
  
• Soft start turn-on
  
• Mono channel operation
  
• Speaker-level (high-level) inputs via RCA (requires Kicker KISL, available and sold separately)
  
• Preamp RCA outputs to daisy chain multiple amps
  
• 3-way protection circuitry (thermal, overload, and speaker short protection)
  
• Dual speaker terminals simplify the hookup of multiple speakers
• 4-gauge power and ground leads and an 80-amp fuse recommended (Not include in this amplifier)
  
• Input sensitivity: Low level: 125mV-5V ; High level: 250mV-10V
  
• Frequency Response: 25 - 200Hz
  
• Signal to Noise Ration: >95dB
  
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
  
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
  
• Fixed Subsonic Filter @ 25hz, 24db/octave
  
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

---

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets