Package Includes:

• (2) Kicker 12" Subwoofers
• Rockville 12" Sealed Sub Enclosure
• Kicker 43CXA12001 1200W RMS Mono Class D Car Stereo Amplifier
• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This is a great package. The (2) subwoofers total 1000 watt RMS. We put a Kicker 1200w RMS CX series amp to it. Kicker underrates their amps, so you will actually get more than 1200 watts. You will get a perfect amount of power to the subs. Enough to maximize them but not too much where you will blow them. The amplifier is 2 ohm stable and you will wire the (2) dual voice coil subs to run at 2 ohms as shown in the below diagram.

---

Authorized Kicker Dealer!

Video of 43CWR122:

Description for Kicker Subs:

CompR takes flexibility to another level with a single pair of stout, push-button wire terminals featuring a convenient impedance-selector slider for easily changing the dual-voice-coil impedance (2/8 Ohms or 1/4 Ohms, depending upon model). No additional wiring is needed for switching between series or parallel configurations.

Besides convenience, CompR delivers the deepest musical bass and is made to work perfectly with any mono amplifiers. The motor structure itself is a mechanical marvel, utilizing a large-diameter, progressive-roll spider for increased linearity and better sound with high-strength Spiralead™ tinsel leads woven through for maximum transfer of signal. A KICKER standard, the one-piece UniPlate,™ features the vented pole piece and bumped back plate that's tapered toward the edge to improve the magnetic force within the gap, optimizing that magnetic energy. The "bump" provides added voice-coil clearance, assuring precise performance. High-temp coil wire winding around the pole piece and innovative Quad Venting™ slots contribute to the woofers' efficient cooling attributes and durability. 

More Magnet:
With a double stacked magnet, the CompR provides powerful bass and a thunderous low-end response for the thump you crave when the volume knob needs a workout.

More Features:
Kicker signature red double stitching makes an outstanding bond between the improved Santoprene®™ surround and a new all-polypropylene woofer cone. You get a deeper bass that stays pumping, no matter what the volume.

Two Coils, One Solution:
Every CompR has two sets of brass voice coil terminals, spring-loaded and covered in a lustrous satin nickel finish. A simple push of the terminal gives you the wiring options you need to get the most out of your system.

12" CompR 2 Ohm:

• The CompR 12-Inch Subwoofer has dual 2Ω voice coils for flexible system design. 
• Spiralead™ tinsel delivers your power reliably and efficiently, while the ribbed Santoprene® surround helps to deliver clear, deep, hard-hitting bass.
• The CompR 12-Inch Subwoofer works best with a sealed or ported enclosure and 500 watts of recommended power.

Features/Specifications:

• Kicker 43CWR122 12" 1000 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer
• Power Handling :
• Peak : 1000 watts
• RMS : 500 watts
• Size : 12"
• Best subwoofer in its class
• Workhorse woofer with advanced components and superior technology
• Large-diameter, progressive-roll spider with high-strength Spiralead™ tinsel leads
• One-piece UniPlate™ with vented pole piece and bumped back plate
• Added voice-coil clearance for full excursion; high-temp coil wire
• Quad Venting™ included vertical and horizontal slots under the cone for ultimate cooling
• Injection-molded polypropylene cone and tough Santoprene® surround
• Full-coverage steel basket with minimized mounting depth
• Stamped Steel Basket
• Spring-loaded Push Terminals
• Dual 4-Ohm high-temperature voice coils
• Double Stacked Magnet
• Top-mount depth : 5-3/4"
• Cutout diameter : 11"
• Min Sealed Box Vol : 1.0 cu. ft.
• Max Sealed Box Vol : 2.0 cu. ft.
• Min Vented Box Vol : 1.75 cu. ft.
• Max Vented Box Vol : 2.25 cu. ft.
• Frequency Response : 25 - 500Hz
• Sensitivity : 86.9 dB
• Subwoofer Design : Round / Circle

---

Description for Rockville Enclosure:

The RD12 dual sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RD12 Dual 12" Sealed Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Dual 12"
• Dimensions in Inches: 13.25” x 13.25” x 32”
• Top and Bottom Depth: 14"
• Mounting Depth: up to 12" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.55 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.25 Cubic Feet

---

You also Get:

Complete Dual Subwoofer Enclosure Installation Kit!

Includes:

• 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 20 Feet of 14 AWG Blue Speaker Wire
• 4 Spade Terminals

This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

---

Description of 43CXA12001:

CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.

The CX 1200.1 Mono Amplifier is built for big bass in a sleek, yet affordable package.

Using a Class D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection.

Features:

• Kicker 43CXA12001 1200 Watt RMS Mono Class D Car Stereo Amplifier
• RMS Power @ 2 Ohms 1200 Watts x 1 Channel
• RMS Power @ 4 Ohms 600 Watts x 1 Channel
  
• Input Sensitivity Selector:
  
  • high level 250mV-10V,
    
  • low level 125mV-5V
    
• Frequency Response 25 to 200 Hz
• LED power (green) and protect (red) indicators
• 3-way protection circuitry (thermal, overload, and speaker short protection)
  
• Dual speaker terminals simplify the hookup of multiple speakers
  
• Soft start turn-on
  
• Pulse Width Modulated MOSFET power supply
• Mono channel operation
• Speaker-level (high-level) inputs via RCA
• Preamp RCA outputs to daisy chain multiple amps
• 4-gauge power and ground leads and a 150-amp fuse recommended (Not include in this amplifier)
  
• Signal-to-Noise Ratio (SNR): 95 dB
  
• Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
• Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
• KickEQ™ Boost: variable to +12dB, centered @ 40Hz
• CXRC wired remote bass level control sold separately
  
• Dimensions (HxWxD): 2 3/8" x 7 3/16" x 12 1/16"