Package Includes:

• (2) Kicker 43CWR102 10" DVC 2-Ohm Car Audio Subwoofers Totaling 1600 Watt
  
• (1) Kicker 43CXA12001 1200W RMS Mono Class D Car Stereo Amplifier
  
• (1) Rockville RWK01 0 Gauge Complete Car Amp Wiring Installation Wire Kit w/ RCA's
  

---

Authorized Kicker Dealer!

Video of 43CWR102:

Description:

CompR takes flexibility to another level with a single pair of stout, push-button wire terminals featuring a convenient impedance-selector slider for easily changing the dual-voice-coil impedance (2/8 Ohms or 1/4 Ohms, depending upon model). No additional wiring is needed for switching between series or parallel configurations.

Besides convenience, CompR delivers the deepest musical bass and is made to work perfectly with any mono amplifiers. The motor structure itself is a mechanical marvel, utilizing a large-diameter, progressive-roll spider for increased linearity and better sound with high-strength Spiralead™ tinsel leads woven through for maximum transfer of signal. A KICKER standard, the one-piece UniPlate,™ features the vented pole piece and bumped back plate that's tapered toward the edge to improve the magnetic force within the gap, optimizing that magnetic energy. The "bump" provides added voice-coil clearance, assuring precise performance. High-temp coil wire winding around the pole piece and innovative Quad Venting™ slots contribute to the woofers' efficient cooling attributes and durability. 

More Magnet:
With a double stacked magnet, the CompR provides powerful bass and a thunderous low-end response for the thump you crave when the volume knob needs a workout.

More Features:
Kicker signature red double stitching makes an outstanding bond between the improved Santoprene®™ surround and a new all-polypropylene woofer cone. You get a deeper bass that stays pumping, no matter what the volume.

Two Coils, One Solution:
Every CompR has two sets of brass voice coil terminals, spring-loaded and covered in a lustrous satin nickel finish. A simple push of the terminal gives you the wiring options you need to get the most out of your system.

10" CompR 2 Ohm:

• The CompR 10-Inch Subwoofer has a pair of 2Ω voice coils for flexible wiring options.
• Bigger magnets, a thicker cone and an improved suspension system help make the CompR a powerful, reliable bass machine.
• The CompR 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power.

Features/Specifications:

• Kicker 43CWR102 10" 800 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer
• Power Handling :
• Peak : 800 watts
• RMS : 400 watts
• Size : 10"
• Best subwoofer in its class
• Workhorse woofer with advanced components and superior technology
• Large-diameter, progressive-roll spider with high-strength Spiralead™ tinsel leads
• One-piece UniPlate™ with vented pole piece and bumped back plate
• Added voice-coil clearance for full excursion; high-temp coil wire
• Quad Venting™ included vertical and horizontal slots under the cone for ultimate cooling
• Injection-molded polypropylene cone and tough Santoprene® surround
• Full-coverage steel basket with minimized mounting depth
• Stamped Steel Basket
• Spring-loaded Push Terminals
• Dual 4-Ohm high-temperature voice coils
• Double Stacked Magnet
• Top-mount depth : 5-1/4"
• Cutout diameter : 9-1/8"
• Min Sealed Box Vol : 0.8 cu. ft.
• Max Sealed Box Vol : 1.25 cu. ft.
• Min Vented Box Vol : 1.25 cu. ft.
• Max Vented Box Vol : 1.75 cu. ft.
• Frequency Response : 25 - 500Hz
• Sensitivity : 84.6 dB @ 1w/1m
• Subwoofer Design : Round / Circle

---

Description of 43CXA12001:

CX Series amps reach massive power levels thanks to an optimized circuit layout and the highest-grade internal components available. Highly efficient heat sinks keep the amp cool with a sophisticated new look. Mono amps offer an optional remote level control to adjust your bass right from the dash.

The CX 1200.1 Mono Amplifier is built for big bass in a sleek, yet affordable package.

Using a Class D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as a 12dB of extra bump with a simple turn of the optional CXRC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection.

Features:

• Kicker 43CXA12001 1200 Watt RMS Mono Class D Car Stereo Amplifier
• RMS Power @ 2 Ohms 1200 Watts x 1 Channel
• RMS Power @ 4 Ohms 600 Watts x 1 Channel
  
• Input Sensitivity Selector:
  
  • high level 250mV-10V,
    
  • low level 125mV-5V
    
• Frequency Response 25 to 200 Hz
• LED power (green) and protect (red) indicators
• 3-way protection circuitry (thermal, overload, and speaker short protection)
  
• Dual speaker terminals simplify the hookup of multiple speakers
  
• Soft start turn-on
  
• Pulse Width Modulated MOSFET power supply
• Mono channel operation
• Speaker-level (high-level) inputs via RCA
• Preamp RCA outputs to daisy chain multiple amps
• 4-gauge power and ground leads and a 150-amp fuse recommended (Not include in this amplifier)
  
• Signal-to-Noise Ratio (SNR): 95 dB
  
• Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
• Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
• KickEQ™ Boost: variable to +12dB, centered @ 40Hz
• CXRC wired remote bass level control sold separately
  
• Dimensions (HxWxD): 2 3/8" x 7 3/16" x 12 1/16"
  

---

Video of RWK01:

Description:

The Rockville RWK01 0 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is lost per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires have a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

Features:

• Rockville RWK01 0 AWG (American Wire Gauge) Complete Car Amp Installation Wire Kit
• 17’ – 0 Gauge Translucent Blue SuperFlex Power Cable
• 3’ – 0 Gauge Translucent Black SuperFlex Ground Cable
• Gold Plated ANL Heat Resistance Fuse Holder
• 200 Amp ANL Gold Plated Fuse
• 1 – 17’ High Grade Twisted Pair of RCA Interconnects
• 25’ Translucent Blue Speaker Wire
• 7’ Split Loom Tubing
• 17’ Amplifier Remote Turn On Cable
• Wire Ties and Ring Terminals, and all other accessories you need for a clean installation
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F